Schlage Commercial B202-672 Rose & Turn With Holdback, B250

The B202-672 is the interior trim set for a Schlage B250 deadbolt: the rose plate that covers the prep on the inside face plus the thumbturn that throws and retracts the bolt. It is a replacement part, not a complete lock, so it does not include the bolt, the exterior cylinder, or the strike. If the thumbturn on an existing B250 is broken, worn, or the wrong finish, this is the piece that swaps out.

Holdback lets the thumbturn hold the deadbolt retracted so the door can be left free to swing without the bolt catching the strike or the jamb. Property managers use it during move-ins, deliveries, and open-unit periods, then release it back to normal throw. It is the functional difference between this turn and a plain thumbturn trim on the same B250 lock.

Eight finishes: 605 bright brass, 606 satin brass, 609 antique brass, 612 satin bronze, 613 oil rubbed bronze, 622 matte black, 625 bright chrome, and 626 satin chrome. Order the trim in the same finish code as the rest of the deadbolt, since these parts are finish specific and a 626 turn against a 613 exterior will read as a mismatch on the door.

Yes, if the deadbolts are B250s. The B202-672 is built for that series, and with eight finish options you can hold one part number per finish across a whole property and stock a few spares. Confirm each door is a B250 before you buy in quantity; mixed-series doors will need their own trim.

The trim is stainless steel and specified for commercial use, which is what you want on a turn that gets cycled by tenants and staff every day. Stainless also holds up better than plated pot metal on exterior-facing units and in coastal or high-humidity buildings.