Schlage Electronics PB405 Elec...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$880.00
$655.20
Schlage Electronics PB405 Electrified Dead Bolt Lock, 12/24 VDC

Schlage Electronics PB405 Electrified Dead Bolt Lock, 12/24 VDC

(No reviews yet) Write a Review

Model: PB405

In Stock (leaves warehouse same day if ordered before 3pm ET)

$880.00
$655.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schlage Electronics PB405 Electrified Dead Bolt Lock

The Schlage Electronics PB405 Electrified Dead Bolt Lock is an Electrified Dead Bolt Lock. The PB405 PowerBolt is a mortise, right angle deadbolt with a .61" bolt and a .67" throw. It is fail-safe and installs in the door frame for minimal impact to the door and a clean, cohesive opening.

Features include:

  • 12/24V DC, field selectable
  • Magnetic door position switch
  • Built in relocking time delay, field selectable for 0, 3, 5 or 9 seconds, field selectable utilizing two simple dip switches
  • Rectangular front, (L x W x D): 7.87 in x 1.26 in x 1.57 in
  • Bolt diameter: 0.61 in
  • Bolt throw: 0.67 in
  • Weight: 1.9 lbs
  • Mortise mount PowerBolts furnished in satin aluminum finish

Manufacturer Resources

Product Specs

Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Product Type:
Electric Deadbolts
Product Voltage:
12/24 VDC
Department:
Door Hardware

Schlage Electronics PB405 – Frequently Asked Questions

1) Does the Schlage PB405 PowerBolt mount in the door or the frame?
The PB405 PowerBolt is a mortise, right angle deadbolt that installs in the door frame, not in the door leaf. That keeps the prep off the door itself, which matters on glass doors, aluminum doors, or anywhere you don't want to cut the leaf. Plan your frame mortise around the rectangular front, 7.87 x 1.26 x 1.57 inches (L x W x D).
2) Is the Schlage PB405 electric deadbolt fail safe or fail secure?
Both are offered. The PB405 is ordered as either Fail Safe or Fail Secure, so you pick the behavior on power loss when you order. Fail safe releases the bolt when power drops, which is what egress and life safety openings usually call for; fail secure keeps the bolt projected when power drops, which suits a storeroom, IT closet, or exterior door where you want it locked in an outage. This is a hardware selection, not a field setting, so specify it up front.
3) Will the PB405 bolt throw far enough for my frame strike prep?
The PowerBolt projects 0.67 inch on a 0.61 inch diameter bolt. Because it mortises into the frame and throws at a right angle, the receiving prep goes in the door edge rather than the jamb, and it needs to accept a 0.61 inch round bolt to a depth that clears 0.67 inch of throw. Confirm your door edge can take that pocket before you cut.
4) Can I tell from the access control panel whether the door is actually closed with a PB405?
Yes. The PB405 has a built in magnetic door position switch, so you get door status back at the panel without mounting a separate surface or recessed contact on the opening. One less device to install and one less pair of wires to run.
5) Can I delay how fast the PowerBolt relocks after someone badges in?
The relocking time delay is built into the PB405 and set in the field with two dip switches: 0, 3, 5 or 9 seconds. Nine seconds is the setting to reach for on a slow opening or where someone is carting material through; zero relocks the moment the signal drops. No extra timer module needed.
6) Is an electric deadbolt like the PB405 the right choice, or should I use an electric strike or maglock?
A frame mortised electric deadbolt suits openings where you can't or don't want to modify the door leaf, and where you want a positive bolt holding the door rather than a latch or a magnet. The PB405 throws a 0.61 inch bolt 0.67 inch into the door edge and carries its own door position switch. An electric strike is the better answer when the door already has a mechanical latch you want to keep and only the keeper needs to release. Order the fail safe version where the code official requires release on power loss, and the fail secure version where the opening must stay locked in an outage.
7) What finish does the Schlage PB405 mortise PowerBolt come in?
Satin aluminum. Mortise mount PowerBolts are furnished in satin aluminum, which is the finish that blends into an aluminum storefront frame. Since the unit sits in the frame, the only exposed piece is the faceplate, so it reads as frame hardware rather than door hardware.
How fast can I get the Schlage Electronics PB405 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage Electronics PB405 come with a warranty?
Absolutely. The Schlage Electronics PB405 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage Electronics PB405?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schlage Electronics PB405 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!