Schlage L9095EU - Grade 1 Electric Mortise Lock, Both Sides Fail Secure with Dual Cylinder Override, SFIC Prep Less Core, HSLR Anti-Ligature Trim

That's exactly what it's built for. The L9095 mortise case is 1-3/4 inch door thickness standard and 2-3/4 inch backset only, so there is no shallower backset option. The case itself measures 4-7/16 x 6-1/16 x 1 inch, which is a standard commercial mortise pocket. If your existing doors are prepped for a narrower backset, the pocket has to be reworked.

Handing has to be specified. The L9095EU with HSLR trim is ordered left hand or right hand, and it is not a field-reversible chassis. Determine the hand from the outside of the door before you order, because the anti-ligature crescent trim is oriented to the hand as well.

EU is electrically unlocked, fail secure on both sides. Kill the power and the lock stays secure from both sides, with key cylinder override available on each side as a mechanical way in. That fail secure behavior is why it is UL listed for a 3-hour fire door, and the lock case also carries a spring-loaded fusible link that drops it into fail secure mode in a fire.

The HSLR (High Security Ligature-Resistant) trim is the one Schlage calls out for high-risk applications, and the crescent-style handle earns the "paperclip protection" designation under New York State Office of Mental Health testing, which allows it in low, medium and high risk areas. It also complies with ICC A117.1 for accessibility, so you are not trading ADA compliance for ligature resistance.

Three cylinder prep choices. B is SFIC prepped less core, J is Schlage FSIC less core, and P ships as a conventional 6-pin cylinder in the C keyway. The B and J options arrive without the core, so a locksmith or the facility has to supply and key the interchangeable cores. Note that with FSIC interchangeable cores the assembly is Grade 1 operational but Grade 2 security, where the mortise chassis on its own is Grade 1 for both.

The lock uses a 3/4 inch throw stainless latch with a two-piece anti-friction tongue, plus a 1 inch throw stainless deadbolt with an anti-saw pin. It is supplied with an ANSI curved lip strike, 1-1/4 x 4-7/8 inch. If your frame has the standard ANSI 1-1/4 x 4-7/8 strike prep you are fine; a T-strike or a non-ANSI frame prep will need to be changed out.

A few, and they differ by trim style and function. TownSteel's MRX-L-01 is a Grade 1 heavy duty anti-ligature lever mortise lockset and the MRX-A-01 is the same idea with arch trim, both passage function for 1-3/4 inch doors. Marks USA offers the 5PDN, a Grade 1 hospital passage push/pull paddleset in satin stainless, ligature resistant and ADA compliant. Those are all passage, no locking; the Schlage L9095EU is the one that adds an electrically controlled fail secure entrance/office function with dual key override.

TownSteel offers the MRX-L-01, a Grade 1 heavy duty anti-ligature lever mortise lockset in stainless steel with a 1-3/4 inch door thickness. The difference is function: the MRX-L-01 is a passage/hall/closet lockset, while the Schlage L9095EU carries an entrance/office function with keyed single-cylinder operation. If the opening needs to lock, the L9095EU is the one that does it; if it is a non-locking patient room or corridor door, the MRX-L-01 covers it.

Yes. Keying is a required selection: keyed different is the standard, keyed alike is available for multiple locks on one key, and there is a None option when you are ordering less cylinder for SFIC or FSIC cores you will key yourself. A free-text field is there for master keying or special keyway instructions. Standard keyed cylinders use the C keyway 6-pin.

Handle projection is 2.27 inches (58 mm) from the door, and the large plate escutcheon measures 6 x 13.17 x 0.32 inches in cast brass. The handle itself is cast stainless steel. Those numbers matter on narrow corridors and on door pairs where a projecting lever could catch, so check the swing clearance before you commit the opening.

Entrance/Office (ANSI F04) lets the lever retract the latch from either side until the outside is made inoperative, either by key outside or by the inside thumbturn. Once locked, the key outside or the lever inside retracts it. A storeroom function keeps the outside permanently locked with no thumbturn, so staff cannot leave the room unsecured. If you want that behavior instead, look at a storeroom-function Grade 1 mortise such as the Accentra 8805FL or the Cal-Royal NM8080.

It is a heavy duty Grade 1 chassis, certified to ANSI/BHMA A156.13-2017 Series 1000 for both operational and security. Case is cold rolled steel with zinc dichromate corrosion-resistant plating. Vandal resistance is addressed by a breakaway spindle that keeps the door secured if the handle is attacked, Torx security screws on the trim, and an anti-saw pin in the deadbolt.

No. The patented Everest 29 S123 keyway supplied as standard is restricted, which blocks unauthorized key duplication. That's a real consideration in a behavioral health setting where key control is part of the safety plan. If you are running SFIC or FSIC cores instead, order the B or J cylinder prep and key the cores to your own restricted system.

The TownSteel MRX-A-01 is a Grade 1 heavy duty ligature-resistant arch trim mortise lockset in satin stainless steel for 1-3/4 inch doors, in passage function. The Schlage L9095EU uses the HSLR crescent-style handle and is a handed, keyed entrance/office lock on a 2-3/4 inch backset. Trim shape and whether the door needs keying are the deciding factors.

The TownSteel FME-4000 is a Grade 1 heavy duty electronic intruder classroom mortise lockset with RFID technology for 1-3/4 inch doors, and the FME-2000 is a Grade 1 heavy duty RFID classroom mortise lockset for the same door thickness. Both are credential-reading locks aimed at classroom lockdown. The Schlage L9095EU is a Grade 1 heavy duty entrance/office mortise lock with keyed cylinder override and HSLR anti-ligature trim for 1-3/4 inch doors, intended for behavioral health rather than classroom intruder function.

The Corbin Russwin ML2003 is a Grade 1 mortise classroom lockset in the ML2000 series for 1-3/4 inch doors, and the Cal-Royal NM8070 is a heavy duty Grade 1 classroom mortise lockset with auxiliary deadlatch, also 1-3/4 inch. The Schlage L9095EU is entrance/office function, where the latchbolt is retracted by lever from either side unless the outside is made inoperative by key or inside thumbturn.

Only if the opening wants credential-based standalone or wireless access rather than access-control-wired hardware with ligature-resistant trim. The Schlage Electronics LEMD-GRW is a Grade 1 ENGAGE wireless mortise lock with a 125kHz proximity reader and Greenwich trim, 3-hour fire rated; the CO-100 is a Grade 1 heavy duty standalone keypad mortise lock in privacy function for 1-3/4 inch doors; the LEBMB-ADD is a Grade 2 mobile-enabled push button mortise lock. The L9095EU is a non-electronic-credential mechanical chassis with electric control and the HSLR crescent handle for high-risk behavioral health areas.

The Sargent 7925 is a Grade 1 heavy duty dormitory exit function mortise lock with rose trim and a single cylinder deadbolt in the 7900 series. It differs from the Schlage L9095EU in two ways that matter: function is corridor/dormitory rather than entrance/office, and it uses rose trim rather than the HSLR anti-ligature escutcheon, so it is not suitable where ligature resistance is required.

Not for a ligature-resistant opening. The Marks USA LA318GJ is a Grade 1 classroom security indicator mortise lockset for 1-3/4 inch doors with an ANSI strike and a steel escutcheon measuring 8-1/2 inches by 2-3/4 inches by 7/16 inch. The Schlage L9095EU uses a much larger cast brass escutcheon at 6 inches by 13.17 inches by 0.32 inch with the HSLR crescent handle, and is entrance/office rather than classroom security.

Yes, on thickness. The Alarm Lock DL2700CR and DL3500CR are Grade 1 electronic mortise locks in classroom function rated for 1-5/8 inch to 1-7/8 inch doors, and the DL4500 electronic mortise deadbolt covers the same range. The Schlage L9095EU is built for 1-3/4 inch doors standard. Note the Trilogy units are keypad electronic locks in classroom or deadbolt function, not ligature-resistant entrance/office trim.

BEST offers standalone heavy duty mortise lock bodies: the 45HCAC in public entrance function with field reversible operation, and the 45HCAINL lockbody with intruder function. Baldwin also lists 2-1/2 inch backset mortise lock bodies such as the 6301 entrance/apartment and 6310 entrance/storeroom. The Schlage L9095EU is supplied as a complete assembly with the HSLR escutcheon trim on a 2-3/4 inch backset chassis, so it is not the pick if you are reusing existing trim.

They fit different needs on the same opening type. The Falcon MA101 is a Grade 1 heavy duty mortise passage lock, fire rated, field reversible, with no locking function. The Hager 3850E is a Grade 1 office mortise lock with lever and escutcheon, non-keyed, on a 2-3/4 inch backset for 1-3/4 inch to 2-1/2 inch doors. The Schlage L9095EU is keyed single cylinder with a thumbturn, so the outside can be locked by key or from inside. Choose by whether the office door needs key control.

630 satin stainless steel, and that is the only finish offered on the HSLR trim. If you are standardizing a behavioral health unit, everything else on those openings (hinges, pulls, closers) should be specified in 630 to match.

The Cal-Royal NM8440 is a heavy duty Grade 1 privacy mortise lockset with deadbolt for 1-3/4 inch doors, and the Hager 3840S is a Grade 1 privacy mortise lock on a 2-3/4 inch backset for 1-3/4 inch to 2 inch doors. Both are privacy function; the Schlage L9095EU is keyed entrance/office and would not serve a bath door on its own.

No. The Sargent 4874 is a double cylinder mortise deadbolt on a 2-3/4 inch backset, which provides bolt security only with no latch or lever operation. The Schlage L9095EU is a full entrance/office mortise lockset with lever-operated latchbolt and HSLR anti-ligature trim on the same 2-3/4 inch backset. Use the 4874 as supplemental bolt hardware, not as a replacement lockset.