Schlage PC80 Series Grade 1 Storeroom Cylindrical Lock with Rose

Yes. The PC Series installs into the standard cylindrical ANSI 161 door prep with a 2-3/4 inch backset, and the chassis is a no-adjustment design, so there is nothing to set in the field. If the openings were prepped for a standard commercial cylindrical lock, the prep carries over.

Handing is not something you specify. The PC Series is non-handed and field reversible, so one part number covers both swings. That matters for a property manager buying a batch for mixed openings, you can stock a single SKU per finish and lever.

It uses a standard ANSI strike at 4-7/8 inches high by 1-1/4 inches wide, and ships as standard with the 10-072 square corner box strike with a 1-3/16 inch lip. A frame already cut for a 4-7/8 x 1-1/4 ANSI strike takes it without rework. Frames with a smaller T-strike cutout will need a new prep.

It is the ANSI F82 entrance/office function. The lever operates from both sides and retracts the latchbolt at all times, so nobody is ever locked in, and there is no deadbolt in the lock, latchbolt only. This is the function you want on a leasing office or a suite door someone secures at the end of the day, not on a stairwell or a storage room where the outside lever must stay locked.

Cylinder prep is an order option, six of them: SFIC prep less core, SFIC prep with a construction core, FSIC prep less core, FSIC prep with a construction core, less cylinder, or a conventional cylinder. An SFIC house orders the SFIC prep less core and drops in its own cores. On a job still under construction, the prep with a construction core lets trades work the building before the permanent cores go in.

Yes. The PC Series is UL listed for 3 hour fire doors and is certified to ANSI/BHMA Grade 1 for both operational and security standards, which is what a facility spec on a corridor or stair door usually calls for.

They are built to suite with the Schlage PM Series, PT Series, and ALX Series Grade 2 cylindrical locks, and every PC lever suites with Von Duprin exit devices, so a lobby door on an exit device and the unit doors on cylindrical locks read as one set. Six finishes run across all levers and trims: oil rubbed bronze (613), satin nickel (619), matte black (622), bright chrome (625), satin chrome (626), and aged bronze (643E).

Yes, and the key system is the strongest part of the spec. The PC Series takes the full range of Schlage key systems, comes standard with the patented Everest 29 S123 keyway that blocks unauthorized key duplication, offers restricted, geographically exclusive Primus for higher key control, and is compatible with more than seven non-Schlage key systems. A locksmith taking over a building that is not on Schlage keys can usually stay on the existing system.

The Cal-Royal NM8050 is a heavy duty Grade 1 office/entrance lockset with an auxiliary deadlatch, sized for a 1-3/4 inch door. The Hager 3850E is a Grade 1 office mortise lock with lever and escutcheon on a 2-3/4 inch backset, non-keyed, covering 1-3/4 to 2-1/2 inch doors. The Schlage PC80 carries the Entrance/Office function with an F82 ANSI number on a 2-3/4 inch backset, so the Hager 3850E matches it on backset and the NM8050 matches it on door thickness.

You need a different lock. The Schlage PC80 is a non-electronic mechanical lockset. For credential access on the same kind of commercial opening, the Schlage CO-100 is a Grade 1 standalone electronic mortise lock with a keypad reader for a 1-3/4 inch door, the Schlage Electronics LEMD-GRW is a Grade 1 ENGAGE Series wireless mortise lock with a 125kHz proximity reader and a 3 hour fire rating, and the TownSteel FME-2000 is a Grade 1 heavy duty mortise lockset with RFID for a 1-3/4 inch door.

The Cal-Royal NM8080 is a heavy duty Grade 1 storeroom lockset with an interchangeable core option, and the Accentra 8805FL is a Grade 1 storeroom lock in the 8800 Series with an Arcadia lever. Both hold the same ANSI/BHMA Grade 1 rating as the Schlage PC80. The NM8080 lists a 1-3/4 inch door thickness, while the PC80 also covers 1-3/4 inch doors, so either works on a standard commercial door. The difference is trim: the PC80 comes with a snap-on rose in seven lever styles including Athens, Rhodes and Broadway, where the 8805FL is supplied with the Arcadia lever.

For anti-ligature openings, the TownSteel MRX-L-01 is a Grade 1 heavy duty stainless steel anti-ligature lever mortise lockset with passage function for a 1-3/4 inch door, and the MRX-A-01 is the same passage function with a ligature resistant arch trim in satin stainless steel. For a push/pull opening, the Marks USA 5PDN is a Grade 1 hospital passage mortise paddleset that is ligature resistant and ADA compliant in satin stainless steel. The Schlage PC80 uses a curved lever with a snap-on rose, which is a standard commercial trim rather than a ligature resistant one.

No, the Schlage PC80 is supplied as a complete lockset with a lever and rose. For a lock body on its own, the BEST 45HCAC is a heavy duty mortise lock body with public entrance function and field reversible operation, and the BEST 45HCA with intruder function is a heavy duty lockbody in the 40H Series. Baldwin also lists bare mortise lock bodies on a 2-1/2 inch backset: the 6310 entry/storeroom knob by knob for 1-3/8 inch and over doors, and the 6301 entry/apartment lever by lever for 1-3/4 inch and over. Note the PC80 uses a 2-3/4 inch backset, so the Baldwin bodies need a 2-1/2 inch prep.

The Command Access ML190 Series is a heavy-duty motorized mortise lock with field selectable EL/EU operation on 24VDC and a storeroom function, and the BEST 45HW Series is a heavy duty wired electromechanical mortise lock with 12V/24V operation. The Schlage PC80 is a mechanical lockset with no electronic operation, so either of those wired bodies is what carries the access control tie-in.

For an aluminum stile door, the Alarm Lock DL1300NW is a Trilogy Networx wireless electronic mortise lock with keypad built for Adams Rite deadlatches, and the Dormakaba E-Plex 2066 is an electronic pushbutton keyless mortise lock listed for wide stile. For an all-glass door, the Kaba Ilco BR Series is a glass door bottom rail lock. The Schlage PC80 is built for a 1-3/4 inch door with a 2-3/4 inch backset, which is a swing door prep rather than a storefront stile.

Seven curved lever styles are offered: Athens (ATH), Boardwalk (BRK), Broadway (BRW), Latitude (LAT), Longitude (LON), Rhodes (RHO), and Tubular (TLR). Levers are solid zinc, and the rose is snap-on wrought brass at 3-11/25 inch diameter with no exposed screws. If you are covering old, larger rose marks on a refinished door, measure the existing scar against that diameter first.

Request to exit is not built in. Mechanical RX kits are available for lock monitoring but are sold separately, so an integrator tying a door back to an access control panel orders the RX kit on top of the lock. The lock itself is mechanical, not electronic.

Eight mechanical functions: four keyed (entrance, entrance/office, storeroom, and classroom lock with exterior lockdown), two non-keyed (passage latch and bed/bath privacy), and two dummy (single and double). That covers unit doors, offices, closets, restrooms, and inactive leaves of pairs on one lever style and one finish, which is what makes a facility standard hold together.

Yes. The Falcon MA101 is a Grade 1 heavy duty mortise passage lock with field reversible operation and a fire rating, and the Hager 3810S is a Grade 1 passage mortise lock with rose on a 2-3/4 inch backset for 1-3/4 to 2-1/2 inch doors; the Hager 3810E is the same passage function with an escutcheon instead of a rose. The Schlage PC80 is also field reversible and uses a 2-3/4 inch backset, so a passage unit drops into the same prep without the keyed cylinder.

No. The Sargent 4874 is a double cylinder mortise deadbolt on a 2-3/4 inch backset, and the Kaba Ilco 185 Series is a deadbolt function mortise lock with no handing. Both are deadbolt-only bodies with no lever operation. The Schlage PC80 is a lever lockset whose latchbolt is retracted by the lever from either side at all times, so it handles the latching duty a deadbolt does not. The 4874 shares the PC80's 2-3/4 inch backset if you are adding a deadbolt above the lockset.

The Sargent 7925 is a Grade 1 heavy duty mortise lock in the 7900 Series with a corridor/dormitory function, rose trim and a single cylinder deadbolt. The Schlage PC80's Entrance/Office function is latchbolt only, with the latchbolt retracted by the lever from either side at all times, so the 7925 is the one that adds the deadbolt the corridor/dormitory opening calls for. Both are Grade 1.

The Schlage PC80 is specified for a 1-3/4 inch door, which falls inside that band. If you want a lock rated across the full 1-5/8 to 1-7/8 inch range, the Alarm Lock DL3500CR is a Grade 1 electronic mortise lock with 300 user codes and classroom function listing 1-5/8 to 1-7/8 inch, and the DL2700CR is a Grade 1 Trilogy T2 electronic mortise lock with classroom function and weatherproof design over the same thickness range. Both are keypad locks, where the PC80 is mechanical.

No. The Emtek 3019 Brisbane, 3102 Memphis, 3104 Hamilton and 3106 Manhattan mortise entrance locksets are all dummy function, meaning they are inoperable trim with no latching. The Schlage PC80 is a Grade 1 commercial lockset whose latchbolt is retracted by the lever from either side. If you do want dummy trim to match an active opening, the PC80 range itself includes single and double dummy among its eight mechanical functions.

The Cal-Royal NM8080 is a Grade 1 storeroom mortise lockset with an interchangeable core option for a 1-3/4 inch door. The Schlage PC80 handles core prep on its own cylinder axis, with SFIC prep less core, SFIC prep with construction core, FSIC prep less core, FSIC prep with construction core, less cylinder, and conventional cylinder, so you can order the prep that matches the core you already stock rather than changing brands.

Not on a standard commercial door. The Marks USA 21AC and 22AC are entrance double cylinder ornamental iron mortise locks with a round knob, both listing a 1 inch door thickness, which suits narrow ornamental iron gates and doors. The Schlage PC80 is specified for a 1-3/4 inch door with a 2-3/4 inch backset and a lever handle.

No. The Dormakaba LX-I-M002 Saffire is an electronic RFID mortise lockset with BLE mobile access rated BHMA Grade 2. The Schlage Electronics LEBMB-ADD mobile-enabled mortise lock is also Grade 2, for 1-3/4 inch doors with a 3 hour fire rating. The Schlage PC80 is certified Grade 1. If you need Grade 1 with credentials, the Dormakaba E-Plex E5086 back to back pushbutton and card mortise lock is Grade 1.