Schlage ND70x80 - Classroom by...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,812.00
$1,141.56
Schlage ND70x80 - Classroom by Storeroom Lock - Grade 1 Cylindrical Keyed Lever Lock

Schlage ND70x80 - Classroom by Storeroom Lock - Grade 1 Cylindrical Keyed Lever Lock

(No reviews yet) Write a Review

Model: ND70x80PD RHO 626 XN12-006
From the ND-Series Collection
$1,812.00
$1,141.56
Selected Finish is
Selected Lever Type is
Selected Cylinder Option is
Selected Keying is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,812.00
$1,141.56
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Default Attributes
Style: Same lever, rose and finish for both sides of the door with coordinating latch and strike.
Latch: 13-247: 2-3/4" Backset-with 1-1/8" x 2-1/4" Square Corner Faceplate.
Strike: 10-025: 1-3/16" - Lip ANSI, No Box, 1-1/4" x 4-7/8".
Door thickness: 1-3/4".
Strike lip length: 1-3/16".
Keying (for P6, P and T cylinders): KD:Keyed different.
Keys (for P6, and P cylinders): Two nickel silver cut keys per lock.


ND70x80 - CLASSROOM BY STORE ROOM LOCK

Key locks and unlocks outside lever. Key in fixed inside lever retracts latch. Specify per XN12-006.

Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.


Schlage ND SERIES OVERVIEW

The Schlage ND Series offers a full breadth of commercial lock options with a suited combination of mechanical, electrified and electronic options. This overview covers common characteristics for the mechanical and electrified lock information.

Beyond grade 1 performance is the hallmark of the mechanical and electrified locks. ND Series locks are tested to withstand 3,100 in-lb. of abusive lever torque - more than 2 1/2 times the Grade 1 standard requirement. Offset lever pull testing up to 1,600 lbs. assures you of the lock's superb resistance against pry bar attacks. More than strong, ND Series is built to last and shows nearly zero droop or wobble after 16 million cycles.

All ND Series locks including electronic and ligature-resistant trim use the common cylindrical ANSI 161 door preparation making them easily interchangeable. They are ideal for all new construction and retrofit applications.


ND Series Mechanical Lock

The ND mechanical lock, along with being Schlage’s best selling mechanical lock, is the foundation for both the wired electrified and NDE wireless electronic lock. Not only did Schlage invent the cylindrical lock, but they continue to make it better with capabilities such as:

  • Unparalleled strength - the lock prevents access even when subjected to torque loads up to 3,100 in-lbs (2.6x BHMA1), withstands pry bar attacks of 1,600 lbs (8x BHMA requirements1), and withstands 100 hammer blows (20x BHMA requirements1, 2)
  • Exceptional durability - cycle tested to over 16M cycles (16x BHMA requirements1) with near zero droop or wobble - without the use of set screws or O-rings
  • Improved feel - improved strength and durability are more than numbers, you can actually feel it in the lock
  • Improved installation - installation is even easier than before (and withoutany set screws or O-rings)


FEATURES & BENEFITS

Security

  • Significantly exceeds ANSI/BHMA Grade 1 requirements
  • No access with minimum 3,100 in-lb. abusive lever torque, the equivalent of over 690 lbs. applied to the end of a 4-1/2" lever, 2.6 times over the BHMA requirement*
  • No access with minimum 1,600 lbs. offset lever pull for protection against pry bar attacks, 8 times over the BHMA requirement*
  • 5 points of engagement provide nearly zero droop and wobble after 16 million cycles, 16 times over the BHMA requirement*, without the use of set screws or o-rings
  • High security locking when used with Primus XP UL 437 listed cylinders

Function availability and convenience

  • 24 mechanical/4 electrified functions in the ND Series (custom functions available upon request)
  • Multiple key systems available: open, patented and restricted
  • Four electrified functions auto-detect 12/24V DC operation and, with maximum current draws of 0.4 amps and 0.1 amps holding current eliminate heated levers
  • Indicator roses for classroom applications
  • Three spring cage sets support all Schlage plus eight competitive cylinder formats

Aesthetics

  • Nine lever and four rose designs
  • Ten available finishes
  • Perfectly suited to Schlage ALX Series grade 2 locks
  • Suites with Von Duprin exit devices and other Schlage products

Options

  • Vandlgard™ models have a lever that freely rotates up and down when locked to protect the chassis from excessive force on the lever to prevent vandlism.

*Beyond Grade 1 performance for ND Series locks with Schlage cylinders only (Conventional, FSIC & SFIC). Performance with non-Schlage cylinders will exceed BHMA grade 1 requirements, but the product performance may be less than that of Schlage cylinders.


AVAILABLE ND SERIES FUNCTIONS

Other ND Series models can be found in the ND Series section and in-depth function description are available in the ND Series catalog linked below, or in the image carousel above.

Non-keyed functions

  • ND10 ANSI F75 Passage Lock
  • ND12 ANSI F89 Exit Lock (mechanical and electrified)
  • ND40 ANSI F76 Privacy Lock
  • Plus four additional functions

Keyed functions

  • ND50 ANSI F82 Entrance/Office Lock
  • ND53 ANSI F109 Entrance Lock
  • ND70 ANSI F84 Classroom Lock
  • ND80 ANSI F86 Storeroom Lock (mechanical and electrified)
  • Plus six additional functions

Special functions

  • ND30 ANSI F77 Patio Lock
  • ND72 ANSI F80 Communicating Lock
  • Plus five additional functions


CERTIFICATIONS & TESTING

To see all specifications and certifications, review the ND Series catalog in the links below.

Certifications

  • Tested and certified under ANSI/BHMA A156.2 Series 4000, Grade 1
  • UL/cUL listed: All locks 3-hour, A label fire door 4' x 10' single door and 8' x8' pair doors; 90-minute 8' x 10' pair doors with 3/4" latch option
  • Meets ADA requirements
  • Meets BAA (Buy American Act)
  • ANSI/BHMA Certifications: All ND Series comply with A156.2 performance requirements for grade 1 cylindrical locks. Wired electrified complies with A156.25 (indoor), wireless electronic complies with A156.25 (indoor/outdoor) requirements for electrified locking devices.
  • ICC Certifications: Complies with ICC A117.1 Accessible and Usable Buildings and Facilities.
  • UL/cUL Certifications: All locks 3 hour A label single firedoor 4'0" x 10'0"; pair doors 3 hour firedoor 8'0" x 8'0" with 3⁄4" latch option; pair doors 90 minute fire 8'0" x 10'0" with 3⁄4" latch option.
  • CA Fire Code Certifications: All levers with a return to door of 1⁄2" (64 mm) or less comply (Rhodes, Sparta, Tubular, Omega, Longitude, Boardwalk).
  • FL Building Code Certifications: Complies with Florida Building Code (ASTM E330, E1886, E1996) and Miami Dade (TAS 201, 202, 203) requirements for hurricanes.
  • Federal Certifications: Meets FF-H-106C Series 161.
  • Other Certifications: UL294, CSA C22.2 No. 205-M1983, FCC Part 15, IC RSS-210, RoHS.

Testing

  • ANSI Cycles Tested: 3 million cycles (3x ANSI grade requirement).
  • Abusive locked lever torque: Minimum 3,100 inch-pounds without gaining access.
  • Offset lever pull: Mminimum 1,600 foot pounds without gaining access.
  • Vertical lever impact: Minimum 100 impacts without gaining access.
  • Cycle life: Minimum 16 million cycles; 1) with no visible lever sag; 2) without the use of performance aids (i.e. set screws, spacers, etc.).


DOWNLOADS & RESOURCES



Technical resources


Manufacturer Resources

Product Specs

Series:
ND Series
Grade:
Grade 1
Duty Level:
Heavy Duty
Handle Type:
Lever
Keyed Function:
Double Cylinder
Keys Included:
2
Warranty:
10 Year
Standard Latch:
13-247: Deadlatch - 2-3/4" Backset - Square corner, 1-1/8" x 2-1/4"
Standard Strike:
10-025: ANSI, no box, 1-1/4" x 4-7/8" (1-3/16" Lip length)
Subcategory:
Cylindrical Lever Locks
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Product Type:
Leversets
Keyed:
Yes
Electronic:
No
Commercial/Residential:
Commercial
Cylinder and Keyways:
S123
Function Description:
Key locks and unlocks outside lever. Key in fixed inside lever retracts latch. Specify per XN12-006
Lock Type:
Cylindrical
Lock Function:
Classroom by storeroom
Product Attribute:
Cylindrical Locks
IMAP Policy:
Yes
Product Model:
ND70x80
Collection:
ND-Series
Product Function:
Classroom by storeroom
Door Hand Direction:
Non-Handed
Product Category:
Mechanical Locks
Product Substrate:
Zinc and Steel
Department:
Door Hardware

Schlage ND70x80PD RHO 626 XN12-006 – Frequently Asked Questions

1) What does the Schlage ND70x80 classroom by storeroom function actually do?
It's a double-cylinder classroom/storeroom combination: the key on the outside locks and unlocks the outside lever, and a key in the fixed inside lever retracts the latch. The inside lever does not free-turn to exit, so this is not an egress-friendly lock. Schlage requires it to be specified per XN12-006 when ordering. Note the caution that comes with it: double cylinder locks on any door used for egress are a life safety hazard, and installation should follow existing codes only.
2) Can I use the ND70x80 on a classroom door that students exit through?
No. Because both sides are keyed and the inside lever is fixed, nobody gets out without a key. That makes it wrong for any door in the egress path. For a normal classroom door where free egress is required, use the standard ND70 classroom function (key outside locks and unlocks the outside lever, inside lever always free), or the Dexter C1000 classroom lever if you want a Grade 1 alternative. The ND70x80 belongs on doors where controlled entry and exit are both intended and code permits it.
3) Will the Schlage ND70x80 fit my existing 2-3/4 inch backset door prep?
Yes, if the door is bored to the standard cylindrical ANSI 161 prep. The ND70x80 ships with the 13-247 deadlatch on a 2-3/4 inch backset with a 1-1/8 x 2-1/4 inch square corner faceplate, and all ND Series locks use the common ANSI 161 preparation, so they drop into new construction and retrofit openings alike. Door thickness is 1-3/4 inches.
4) Will the ND70x80 latch into the strike that's already in my frame?
The lock comes with the 10-025 ANSI strike, 1-1/4 x 4-7/8 inches with a 1-3/16 inch lip length and no box. If your frame already carries an ANSI 4-7/8 inch strike (standard on hollow metal commercial frames), the supplied latch lines up with it. If your existing strike is a smaller round-corner or T-strike from a residential-grade lockset, plan on cutting the frame for the ANSI strike or reusing your existing ANSI cutout. Lip length matters if the frame is set back from the face of the door, so check the 1-3/16 inch lip clears your stop.
5) Can I get the Schlage ND70x80 keyed alike with the other locks in my building?
Yes. Keying is a required choice at order: keyed different (the standard), keyed alike for multiple locks, or none if you're taking a less-cylinder option. Standard cylinder is the P conventional 6-pin in the Schlage C keyway, and two nickel silver cut keys ship with each lock. If you need it on an existing masterkey system or a specific keyway, put the bitting or system details in the special cylinder/keying field with your order.
6) How do I order the ND70x80 for a small format interchangeable core system?
Pick the cylinder option to match your core program. J is less FSIC cylinder, for full size interchangeable core you supply. L is less cylinder entirely, which is what you want if you're feeding a house SFIC or an existing masterkey program and will core it yourself. P is the factory conventional 6-pin in Schlage C. The ND chassis supports three spring cage sets covering all Schlage cylinder formats plus eight competitive formats, so a non-Schlage cylinder is workable, though the beyond-Grade-1 numbers Schlage publishes apply to Schlage cylinders.
7) Is the Schlage ND70x80 rated for a fire door?
UL and cUL listed for 3 hour A label single fire doors up to 4'0" x 10'0", and for pair doors at 3 hour up to 8'0" x 8'0" with the 3/4 inch latch option, or 90 minute up to 8'0" x 10'0" with the same 3/4 inch latch. It's certified under ANSI/BHMA A156.2 Series 4000 Grade 1, meets ADA, complies with ICC A117.1, and meets FF-H-106C Series 161 for federal work. If you're on a pair of fire doors, the 3/4 inch latch is not optional in the sense that the listing depends on it.
8) What is the closest cross-brand equivalent to the Schlage ND70x80 classroom by storeroom lever lock?
The ND70x80 is a Grade 1 cylindrical lever lock with a classroom by storeroom function, where the key locks and unlocks the outside lever and the key in the fixed inside lever retracts the latch. The Dexter C1000 series comes closest across brands as a Grade 1 cylindrical lever lock in a Classroom Security function (DEX-C1000-CSEC), which is the family of two-cylinder classroom control. The Dexter C1000 Classroom Security is listed for doors 1-3/8 inch to 1-3/4 inch thick, while the Schlage ND70x80 is set up for a 1-3/4 inch door with a 13-247 deadlatch on a 2-3/4 inch backset. Both are keyed on both sides in the classroom-control sense, so the deciding factor is the keyway and key system already in the building.
9) If the opening only needs a standard classroom function and not the second cylinder, what should be ordered instead?
A standard classroom lever is the simpler build: it is keyed on the outside only, with no cylinder in the inside lever. The Dexter C1000 Classroom is a Grade 1 cylindrical lever lock in a plain Classroom function for doors 1-3/8 inch to 1-3/4 inch thick. The Cal-Royal AG03 is a Grade 2 classroom lever on a 2-3/4 inch backset with a 6-pin Schlage C keyway keyed different, which matches the Schlage C keyway the ND70x80 uses on its conventional 6-pin cylinder. The ND70x80 keeps the inside key cylinder because the classroom by storeroom function calls for it, which is why the description carries the double cylinder egress caution.
10) Can a Schlage-keyed building standardize on non-Schlage lever locks without rekeying?
Several cross-brand cylindrical locks are offered in the Schlage C keyway, which is the keyway family the ND70x80 conventional 6-pin cylinder uses. The Cal-Royal AG00 entrance lever and AG03 classroom lever are both built with a 6-pin Schlage C keyway keyed different, the AG03 on a 2-3/4 inch backset that matches the ND70x80 latch backset. The Arrow MK33-BD-CS also takes a conventional cylinder in the Schlage C keyway. Separately, the Accentra 107S is a Schlage cylinder adapter kit for Yale hardware, which is the path when Yale trim has to accept a Schlage cylinder.
11) Does the Schlage ND70x80 need to be ordered left hand or right hand?
No handing to specify. The ND70x80 is non-handed, so the same lock works on a left or right hand door and you are not stuck with the wrong part if the opening swings the other way than the drawing showed.
12) Which Schlage ND lever styles meet the California fire code return requirement?
Rhodes, Sparta, Tubular, Omega, Longitude and Boardwalk all have a return to door of 1/2 inch (64 mm) or less and comply. The full lever choice on the ND70x80 is Athens, Boardwalk, Broadway, Latitude, Longitude, Omega, Rhodes, Sparta and Tubular, so if you're specifying into a California job, pick from the six compliant designs. Same lever, rose and finish goes on both sides of the door.
13) What finishes does the Schlage ND70x80 come in, and is there anything for a healthcare corridor?
Ten finishes: 605 bright brass, 606 satin brass, 612 satin bronze, 613 oil rubbed bronze, 619 satin nickel, 622 matte black, 625 bright chrome, 626 satin chrome, 626AM satin chrome antimicrobial, and 643E aged bronze. The 626AM antimicrobial satin chrome is the one to look at for patient care and food service areas where touch surfaces are a concern. For matching a building already standardized on 626, that satin chrome is the common commercial default.
14) Will the Schlage ND70x80 match the rest of the hardware in my building?
The ND Series suites with Von Duprin exit devices and other Schlage products, and it is trim-matched to the Schlage ALX Series Grade 2 locks, so you can run ND on the high traffic openings and ALX on lighter interior doors with the same lever and rose showing throughout. Nine lever designs and four rose designs across ten finishes gives you the range to match what's already hung.
15) Is a Schlage ND lock worth it over a Grade 2 lever for a high traffic door?
On a door that gets hammered, yes, and the margin is not small. The ND chassis holds against 3,100 in-lb of abusive lever torque without opening (2.6x the BHMA Grade 1 requirement), takes 1,600 lbs of offset lever pull against pry bar attack, survives 100 hammer blows, and shows near zero droop or wobble after 16 million cycles, all without set screws or O-rings. Those figures apply with Schlage cylinders. A Grade 2 lever like the Hager 2580 storeroom or the Cal-Royal AG05 will do for a stockroom or a low traffic office; a school corridor, a stairwell or a hospital wing is where the ND earns the difference.
16) What are the alternatives to a Schlage ND70x80 if I only need a standard keyed classroom lever?
Several, depending on grade and budget. The Dexter C1000 classroom lever is Grade 1 with a clutching lever and fits 1-3/8 to 1-3/4 inch doors. The Cal-Royal AG03 classroom lever is Grade 2 in a 6-pin Schlage C keyway keyed different on a 2-3/4 inch backset, which keys straight into an existing Schlage C system. If what you actually want is classroom security (lockdown from inside without opening the door), the Dexter C1000 classroom security lever covers that. The ND70x80 is the narrower case: keyed on both sides, which none of those three are.
17) Can I swap a Schlage ND70x80 later for an electronic lock without redoing the door?
Yes. Every ND Series lock, including the electrified and electronic versions and the ligature-resistant trim, uses the same cylindrical ANSI 161 door preparation, so the mechanical ND70x80 you install today comes off and an NDE wireless or a wired electrified ND goes back on the same holes. That makes it a reasonable way to hang mechanical hardware now on doors you intend to bring onto access control later.
18) Does the Schlage ND70x80 qualify for a Buy American government job?
It meets the Buy American Act and FF-H-106C Series 161, which is the federal specification reference procurement officers look for on cylindrical locksets. It's also certified to ANSI/BHMA A156.2 Series 4000 Grade 1, meets ADA, and complies with the Florida Building Code (ASTM E330, E1886, E1996) and Miami Dade TAS 201, 202 and 203 hurricane requirements if the job is in a wind-borne debris zone.
19) Can I get higher security keying on a Schlage ND lever lock?
Yes. Used with Primus XP cylinders, which are UL 437 listed, the ND gives you high security locking with key control. Standard is the conventional 6-pin Schlage C keyway. Multiple key system types are available (open, patented and restricted), so if the concern is unauthorized key duplication on a school or clinic, specify a patented or restricted system rather than the open C keyway.
20) What is the alternative when a storeroom lever is wanted instead of classroom by storeroom control?
Storeroom function keeps the outside lever locked at all times and unlocks only with the key, with no way to leave the outside lever unlocked. The Cal-Royal AG05 is a Grade 2 storeroom lever lockset with a deadlocking latchbolt for doors 1-3/8 inch to 1-3/4 inch thick, and the Hager 2580 is a Grade 2 storeroom cylindrical lock with the Withnell lever for doors 1-3/8 inch to 2 inch thick. The Schlage ND70x80 differs in that the key locks and unlocks the outside lever and a key in the fixed inside lever retracts the latch, so it gives a teacher inside-key control that a pure storeroom lever does not.
21) Which lever locks look like a substitute for the ND70x80 but will not lock the door?
Several cylindrical levers share the same look and the same door prep but carry no cylinder at all. The Falcon K101 is a Grade 1 heavy duty passage lock for doors 1-3/8 inch to 2-1/4 inch, the Falcon T101 is a Grade 1 heavy duty passage lever, and the Design Hardware X75 is a Grade 1 passage lever lockset for a 1-3/4 inch door. All three are passage function, meaning the lever always retracts the latch. Dummy trims such as the BEST 9K 1DT and the Accentra 455LN Augusta are Grade 1 but do not operate a latch at all. The ND70x80 is keyed and ships with two keys, so none of these will substitute where key control is required.
22) What cylindrical lever works for a door thicker than 1-3/4 inches when the ND70x80 is built for 1-3/4 inch doors?
The Schlage ND70x80 comes set for a 1-3/4 inch door with the 13-247 deadlatch on a 2-3/4 inch backset. Where the door is thicker, the Corbin Russwin CL3110 covers 1-3/4 inch to 2 inch, the Falcon K101 covers 1-3/8 inch to 2-1/4 inch, and the Hager 2580 storeroom lever covers 1-3/8 inch to 2 inch. Those three differ in function from classroom by storeroom control, so confirm the function the opening needs before switching for thickness alone.
23) What is the difference between the ND70x80 and a Grade 1 entry/office lever when securing an office rather than a classroom?
An entry/office lever is locked and unlocked from the inside without a key, usually by a button or turn, and the key retracts or releases from outside. The Dexter C1000 Entry/Office is a Grade 1 clutching keyed cylindrical lever for doors 1-3/8 inch to 1-3/4 inch thick. The Schlage ND70x80 instead uses a key on both sides: the outside lever is locked and unlocked by key, and the key in the fixed inside lever retracts the latch. That two-cylinder arrangement is why the caution against double cylinder locks on egress doors applies to it and not to an entry/office function.
24) What is the alternative to the ND70x80 when the classroom door needs to be controlled electrically from an access control system?
The ND70x80 is a mechanical, non-electronic lock. Where the opening has to be released or secured from a card reader or panel, the Corbin Russwin CL33903 is a Grade 1 fail safe electrified cylindrical lever lock running on 12VAC/DC for doors 1-3/4 inch to 2 inch thick, offered with an NZ lever and D rose. Fail safe means the outside lever unlocks when power drops, so confirm that is the behavior the life safety plan calls for before substituting it for a mechanically keyed classroom by storeroom lever.
25) What matches the ND70x80 on the non-locking doors of the same corridor?
For passage and dummy openings alongside a keyed classroom door, the Grade 1 options keep the same performance tier: the Falcon K101 Grade 1 heavy duty passage lever for doors 1-3/8 inch to 2-1/4 inch, the Falcon T101 Grade 1 heavy duty passage lever, the Design Hardware X75 Grade 1 passage lever for 1-3/4 inch doors, and the BEST 9K 1DT Grade 1 heavy duty single dummy trim. Grade 2 counterparts include the Accentra 5301LN Augusta passage lever and the BEST 7KC 1DT medium duty dummy trim. The Schlage ND70x80 itself is offered in nine lever designs and ten finishes, so the trim on the keyed doors can be picked to sit with whichever passage set is chosen.
26) What is the Schlage ND70x80 made of?
Zinc and steel construction, rated heavy duty for commercial use. It's a mechanical lock with no electronics in it, so there's no power, no batteries and nothing to commission.
27) What replaces key control with a code on a lever lock instead of the ND70x80 cylinder?
Keypad leversets remove the key from daily use. The Lockey 1150 is a heavy duty mechanical keypad lever set with a double combination for doors 1-1/8 inch to 2 inch thick and needs no power. The Delaney LP250 is a Grade 2 electronic keypad leverlock, and Emtek offers a Classic keypad leverset. The Schlage ND70x80 differs in that it is keyed on both sides and ships with two cut keys, so it stays on a master key system that a standalone code lock does not join.
28) Is a residential-style entry lever a valid swap for the ND70x80 on a commercial opening?
They serve different buildings. The ND70x80 is a commercial, heavy duty Grade 1 cylindrical lever in zinc and steel. The Kwikset 200BRNL Breton passage lever and 300BRNL Breton privacy lever are Grade 3 for doors 1-3/8 inch to 1-3/4 inch thick, the Cal-Royal AUS00 entrance lever is Grade 3, and Callan Artino and Bennett entrance leversets are Grade 3. Deltana Claremont, Manchester, Morant, and Linstead levers are entry-function decorative sets, with Manchester, Morant, and Linstead covering 1-3/8 inch to 2 inch doors. Those suit a residential or light-traffic door rather than a keyed classroom control opening.
How fast can I get the Schlage ND70x80PD RHO 626 XN12-006 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage ND70x80PD RHO 626 XN12-006 come with a warranty?
Absolutely. The Schlage ND70x80PD RHO 626 XN12-006 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage ND70x80PD RHO 626 XN12-006?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schlage ND70x80PD RHO 626 XN12-006 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Videos

!