Schlage PM056 Grade 1 Entrance...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$977.00
$611.31
Schlage PM056 Grade 1 Entrance/Office with Automatic Unlocking Mortise Lock, Standard Cylinder - Two Lever

Schlage PM056 Grade 1 Entrance/Office with Automatic Unlocking Mortise Lock, Standard Cylinder - Two Lever

(No reviews yet) Write a Review

Model: PM056P TWOA 626
$977.00
$611.31
Selected Finish is
Selected Lever Style is
Selected Cylinder is
Selected Rose/Escutcheon Design is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$977.00
$611.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schlage PM056 Grade 1 Entrance/Office with Automatic Unlocking Mortise Lock, Standard Cylinder - Two Lever

Overview

Grade 1, Mortise Locks Purpose-built to serve the commercial real estate, retail, multifamily and hospitality industries, Schlage Performance Series™ locks feature exceptional quality and style at a highly competitive price point. The PM Series offers 26 functions, including three electrified, and four mortise deadbolt functions, all made to meet Schlage’s rigorous quality standards. With popular levers and finish options, Schlage's full key system security line up, and its durable design, you can meet needs for both security and style. They are made to suite with other Allegion products to present a quality, complete door hardware solution and provide a consistent user experience throughout your building or complex. Better yet, you can suite the PM Series mortise locks with the PT Series tubular locks, as they share lever and rose styles.

 

PM056 - Entrance/Office Lock with Automatic Unlocking

  • Key cylinder outside; thumbturn inside; latchbolt and deadlocking auxiliary latch
  • Latchbolt retracted by lever from either side
  • Outside lever is made inoperative by key outside or by turning inside thumbturn
  • Key outside unlocks outside lever and retracts latchbolt
  • Rotating inside thumbturn unlocks outside lever; turning inside lever retracts latchbolt and unlocks outside lever; closing door also unlocks preventing lock-out
  • Inside lever always free for immediate egress

Chassis

  • Case: Cold Rolled Steel (CRS) with corrosion resistant zinc dichromate plating
  • Case size: 4-7/16" x 6-1/16" x 1" (113 mm x 154 mm x 25 mm) Note: PM and L Series case and cover holes differ.
  • Spacing: lever to cylinder 3-7/8" (98 mm);  lever to thumbturn hub 2-11/16" (68 mm)
  • Door thickness: 1-3/4" (44 mm) standard; 1-3/8" (35 mm) minimum; fits doors up to 2-1/2" thick - specify door thickness if  over 1-3/4" and position in door (Available EE only)                                     
  • Field reversible handing

 

Trim Options

  • 10 lever designs made of zinc
  • N escutcheons: 7-7⁄8” x 2-1⁄2” x 7⁄16” (200 mm x 64 mm x 11 mm); wrought brass
  • Roses: A 2-1/8" (54 mm), B 2-9/16" (65 mm), C 2-5/8" (67 mm) - brass
  • Thumbturn style is ADA qualified

 

Latches, Armors, Strikes

  • Backset: 2-3/4" (70 mm) only
  • Armor: Standard - 1-1⁄4" x 8" x 7⁄32" (32 mm x 203 mm x 6 mm); Optional - 1-1⁄16" x 8" x 7⁄32"  (27 mm x 203 mm x 6 mm) 
  • Deadbolt: 1" (25 mm) throw stainless steel 
  • Latch: 3⁄4" (19 mm) throw stainless steel with anti-friction tongue
  • Strike: ANSI curved lip strike 1-1⁄4" x 4-7⁄8" (32 mm x 124 mm) standard; dust box included
  • Strike lip length: 1-3⁄16" (30 mm); optional strike lip lengths - 7⁄8", 1", 1-1⁄2", 1-3⁄4", and 2"  

 

DOWNLOADS & RESOURCES

Product Information

 

Related Product Information

 

Technical Resources

 

Manufacturer Resources

Product Specs

Subcategory:
Mortise Locks
Product Group:
Mechanical Locks
Series:
PM Series
Function Description:
Levers only-both sides; latchbolt only; Latchbolt retracted by lever from either side at all times
Grade:
Grade 1
Keyed Function:
Non-Keyed
Handle Type:
Lever
Standard Strike:
10-072 1-1/4" x 4-7/8" Square Corner Strike, Box (1-3/16" Lip Length)
Warranty:
3 Year Limited
Keyed:
No
ANSI/BHMA:
F01
Product Subgroup:
Mortise Locks and Trim
Product Type:
Mortise Locks
Commercial/Residential:
Commercial
Lock Type:
Mortise
Lock Function:
Passage
IMAP Policy:
Yes
Product Attribute:
Mortise Locks
Electronic:
No
Product Model:
PM056
Product Function:
Passage/Hall/Closet
Door Hand Direction:
Field Reversible
Door Thickness Range:
1-3/4"
Product Category:
Mechanical Locks
Backset (Distance):
2-3/4"
Department:
Door Hardware

Schlage PM056P TWOA 626 – Frequently Asked Questions

1) How does the automatic unlocking feature on the Schlage PM056 mortise lock actually work?
The PM056 is an entrance/office lock with automatic unlocking, which means it cannot be left in a locked state once the door closes. The outside lever is made inoperative by the key outside or by rotating the inside thumbturn. Turning the inside thumbturn back, or turning the inside lever, unlocks the outside lever, and closing the door also unlocks it, which prevents a lock-out. The key outside unlocks the outside lever and retracts the latchbolt. The inside lever is always free for immediate egress.
2) What door thickness will the Schlage PM056 mortise lock fit?
Standard is 1-3/4 inch (44 mm), which covers most commercial openings. The minimum is 1-3/8 inch (35 mm), and it will go up to 2-1/2 inch doors. If your door is thicker than 1-3/4 inch you have to specify the actual thickness and the lock position in the door when ordering, and that is available in the EE configuration only.
3) What cylinder choices do I pick from when ordering a Schlage PM056?
Five cylinder configurations are offered: B for less SFIC, J for less FSIC, L for less conventional 6-pin cylinder, P for a conventional 6-pin cylinder keyed 5, and T for an FSIC construction core. Pick one of the "less" options if you are supplying your own cores from an existing key system, the P if you want the lock to arrive with a working conventional cylinder, or T if you need the opening secured during construction and cored later.
4) Will the mortise pocket cut for a Schlage L Series lock accept a PM056?
Not without checking. The PM Series case measures 4-7/16 x 6-1/16 x 1 inch (113 x 154 x 25 mm), and Schlage notes that PM and L Series case and cover holes differ. Also plan your hole locations: lever to cylinder spacing is 3-7/8 inch (98 mm) and lever to thumbturn hub is 2-11/16 inch (68 mm).
5) What is a cross-brand equivalent to the Schlage PM056 entrance/office mortise lock?
The Cal-Royal NM8050 is a heavy duty Grade 1 mortise lockset with entrance/office function and an auxiliary deadlatch, on a 1-3/4 inch door thickness, which lines up with the PM056's Grade 1 entrance/office role and 1-3/4 inch door thickness. Hager's 3850E is a Grade 1 office-function mortise lock with lever and escutcheon trim on a 2-3/4 inch backset, the same backset the PM056 uses, and it is non-keyed where the PM056 is offered with conventional 6-pin, SFIC and FSIC cylinder preps.
6) I need a mortise lock for a corridor or closet door that never locks - what should I use instead of the PM056?
The PM056 is built around a keyed outside lever with an inside thumbturn, so it is more lock than a door that never needs securing requires. For a true passage opening, the Falcon MA101 is a Grade 1 heavy-duty mortise passage lock with field reversible operation and a fire rating, and the Hager 3810S and 3810E are Grade 1 passage mortise locks on a 2-3/4 inch backset in rose and escutcheon trim respectively - the same backset the PM056 uses.
7) The opening needs to stay locked to the outside at all times - is the PM056 the right function?
No. The PM056 unlocks the outside lever when the door closes, which is what prevents lock-out on an office door. For an opening that must remain secured to the outside, storeroom function is the fit: the Accentra 8805FL is a Grade 1 storeroom mortise lock in the 8800 Series with an Arcadia lever, and the Cal-Royal NM8080 is a Grade 1 storeroom mortise lockset on a 1-3/4 inch door with an interchangeable core option.
8) Do I have to order the Schlage PM056 handed, or can it be reversed on site?
Handing is not an ordering decision here. The PM056 is field reversible, so the same lock body can be set for either hand during installation. That makes it easier to stock one part across a building instead of splitting inventory between left and right hand openings.
9) Can I match the Schlage PM056 to the other locks in my building?
Yes, within the Allegion range. The PM Series is made to suite with other Allegion products, and it shares lever and rose styles with the Schlage PT Series tubular locks, so a mortise opening and a bored opening down the hall can carry the same lever and rose. The finish list also lines up across the series: 613, 619, 622, 625, 626 and 643E.
10) Is the Schlage PM056 Grade 1, and what ANSI function is it?
Grade 1, and it carries the ANSI/BHMA F01 function designation. It is a mechanical lock with no electronics, built for commercial use, with a cold rolled steel case and corrosion resistant zinc dichromate plating. The thumbturn style is ADA qualified.
11) What is the classroom-function alternative to the Schlage PM056?
Classroom function keeps the outside lever locked or unlocked by key only, with no inside thumbturn of the kind the PM056 uses. Mechanical options include the Corbin Russwin ML2003, a Grade 1 classroom mortise lockset in the ML2000 Series for 1-3/4 inch doors, and the Cal-Royal NM8070, a Grade 1 classroom mortise lockset with auxiliary deadlatch on a 1-3/4 inch door. Marks USA LA318GJ adds a classroom security indicator with an ANSI strike and a steel escutcheon measuring 8-1/2 inches by 2-3/4 inches by 7/16 inch.
12) Can I use the PM056 on a restroom or bedroom door that needs privacy?
The PM056 is an entrance/office lock with a key cylinder outside, so it is keyed hardware rather than privacy hardware. For privacy openings, the Cal-Royal NM8440 is a Grade 1 privacy mortise lockset with deadbolt for 1-3/4 inch doors, and the Hager 3840S is a Grade 1 privacy mortise lock on a 2-3/4 inch backset for doors 1-3/4 to 2 inches thick - the PM056 carries the same 2-3/4 inch backset.
13) If I want keypad or credential access on the same mortise prep, what replaces the PM056?
The PM056 is a mechanical mortise lock with no electronics. On the electronic side, the Schlage CO-100-MS standalone electronic mortise lock is a Grade 1 heavy duty unit with a keypad reader for 1-3/4 inch doors, the same door thickness the PM056 is built for, and the Schlage Electronics LEMD-GRW is a Grade 1 ENGAGE Series wireless mortise lock with a 125kHz proximity reader and a 3 hour fire rating. The Accentra NTM623-NR nexTouch Generation 3 mortise lock uses a capacitive touchscreen keypad with cylinder override and no deadbolt.
14) Are the Baldwin 6301 and 6310 mortise lock bodies substitutes for the Schlage PM056?
They serve related functions but not the same prep. The Baldwin 6301 is an entry/apartment mortise lock body and the 6310 is an entry/storeroom body, both on a 2-1/2 inch backset - the PM056 is 2-3/4 inch backset only, so the mortise pocket and strike layout differ. Baldwin offers the 6301 in knob by knob and lever by lever (6301LS) configurations, while the PM056 is lever trim.
15) For a behavioral health or detention-type opening, what mortise lockset should I look at instead of the PM056?
The PM056 uses standard zinc lever trim on roses or an N escutcheon, which is not ligature resistant. TownSteel's MRX-L-01 is a Grade 1 heavy duty stainless steel anti-ligature lever mortise lockset in passage function for 1-3/4 inch doors, and the MRX-A-01 is the same passage function in satin stainless ligature resistant arch trim. Marks USA 5PDN is a Grade 1 hospital passage mortise push/pull paddleset that is ligature resistant and ADA compliant in satin stainless steel.
16) What mortise lock covers a dormitory or corridor door where the PM056 office function is not accepted?
The Sargent 7925 is a Grade 1 heavy duty mortise lock in the 7900 Series with dormitory exit function, rose trim and a single cylinder deadbolt. The BEST 45HCAC is a heavy duty mortise lock body in public entrance function with field reversible operation, matching the PM056's field reversible handing. The PM056 itself is entrance/office with automatic unlocking, so the outside lever releases when the door closes.
17) My door is thinner than 1-3/4 inch - what mortise lock fits instead of the PM056?
The PM056 is built for 1-3/4 inch doors as standard with a 1-3/8 inch minimum, and fits up to 2-1/2 inch when door thickness and position are specified. If you are working a narrow or ornamental iron door, the Marks USA 21AC and 22AC entrance double cylinder ornamental iron mortise locks with round knob are listed for 1 inch door thickness. Hager's 3810S and 3810E passage mortise locks cover 1-3/4 to 2-1/2 inch doors.
18) I need a mortise lock with a keypad or card reader instead of a key. What should I look at?
The PM056 is strictly mechanical, so if you want credentials you need a different lock. Within Schlage Electronics, the CO-100 is a Grade 1 standalone electronic mortise lock with a keypad reader for 1-3/4 inch doors, and the LEMD-GRW is a Grade 1 ENGAGE wireless mortise lock with a 125kHz proximity reader. Other options we carry include the Alarm Lock DL3500CR Grade 1 Trilogy with 300 user codes and the TownSteel FME-2000 Grade 1 RFID mortise lockset.
19) Is a Sargent mortise thumbturn or the 4874 deadbolt an alternative to the PM056?
No - those are different pieces of hardware. The Sargent 130KB and 130W are mortise thumbturns only, from the 8200 and 7800 Series respectively; the PM056 already includes an inside thumbturn as part of the lock. The Sargent 4874 is a double cylinder mortise deadbolt on a 2-3/4 inch backset with no latchbolt or lever function, where the PM056 provides a latchbolt retracted by lever from either side plus a deadlocking auxiliary latch.
20) Do the Emtek Brisbane or Memphis mortise entrance locksets work as substitutes for the PM056?
They do not. The Emtek 3019 Brisbane, 3102 Memphis, 3104 Hamilton and 3106 Manhattan mortise entrance locksets are dummy function, meaning inactive trim with no latch operation. The PM056 is a working Grade 1 commercial mortise lock whose latchbolt is retracted by the lever from either side, with a key cylinder outside and thumbturn inside.
How fast can I get the Schlage PM056P TWOA 626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage PM056P TWOA 626 come with a warranty?
Absolutely. The Schlage PM056P TWOA 626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage PM056P TWOA 626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schlage PM056P TWOA 626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!