You may also like
Screw 10-24 x 1-1/2 OV PH MS 18-8 SS (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JSRMO2 – Frequently Asked Questions
1) Is the JSRMO2 screw stainless steel, and will it hold up outdoors or in damp locations?
It's 18-8 stainless steel, the common austenitic 300-series grade used where plain or zinc-plated steel would rust. That makes it suitable for damp interiors, exterior boxes and enclosures, and washdown areas. For salt-spray or marine exposure, 316 stainless is the better choice.
2) Do I need a nut or tapped hole to use the JSRMO2, or will it cut its own thread?
It needs mating threads. A machine screw has a blunt, non-tapping point, so the JSRMO2 goes into a 10-24 tapped hole, a 10-24 nut, or a threaded insert. If you're fastening into sheet metal with no threads, use a self-tapping or sheet metal screw instead.
3) How many screws come in a jar of Metallics JSRMO2?
One hundred screws per jar. Metallics ships this one in a jar pack rather than a loose box, which is what makes it practical to keep on a service van or in an MRO crib without the fasteners spilling into the drawer.
4) Will a 10-24 oval head Phillips screw work for mounting electrical device plates and covers?
Yes for 10-24 tapped hardware. The JSRMO2 is an electrical-trade machine screw in the 10-24 thread used on many box covers, plates, and enclosure doors. Note the head: oval head sits in a countersunk or formed hole and leaves a low rounded crown proud of the surface. If your cover has a flat, non-countersunk hole you want a round or truss head instead, and if it needs to sit perfectly flush you want a flat head.
5) Is a 1-1/2 inch length too long for standard device mounting?
For a typical plate or cover screw, yes. At 1-1/2 inches the JSRMO2 is a long machine screw, meant for deep stacks, extension rings, mud rings, fixture canopies, or where you're reaching through added thickness. For flush box-to-plate work the shorter 10-24 lengths are the usual pick, and excess length here will bottom out or stick through behind the device.
How fast can I get the Metallics JSRMO2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSRMO2 come with a warranty?
Absolutely. The Metallics JSRMO2 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSRMO2?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSRMO2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.