You may also like
Screw 10-24 x 1 PN PH Type-F MS St-Z (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JPMP34TF – Frequently Asked Questions
1) What does Type-F mean on a 10-24 machine screw?
Type-F means the screw is a thread cutting screw: it has machine screw threads with a blunt end and cutting flutes, so it taps its own mating thread in an untapped hole in sheet metal rather than needing a pre-tapped hole. On the JPMP34TF that means you can drive it into a drilled hole in a panel or enclosure and it will form the 10-24 thread as it goes.
2) Are the JPMP34TF screws plated for corrosion resistance?
The JPMP34TF is steel with a zinc plating (St-Z). Zinc plating suits dry interior work such as panel, box, and enclosure mounting. For wet locations or exterior use, specify stainless rather than zinc plated steel.
3) Do I need to drill and tap a hole first for these screws?
No tapping step is needed. Because the JPMP34TF is a Type-F thread cutting screw, you drill the clearance hole in the sheet metal and the screw cuts its own 10-24 thread on the way in. You do still need the correct pilot hole diameter for the gauge of metal you are fastening into.
4) How are these Metallics 10-24 screws packaged for shop stock?
They ship as a jar of 100. The jar pack is what MRO and electrical shops keep on the truck or bench for loose fastener pulls, rather than a bulk box.
5) What driver fits the JPMP34TF screw head?
Pan head with a Phillips recess, so a standard Phillips driver or bit drives it. The pan head gives a broad flat bearing surface against sheet metal without needing a countersunk hole.
How fast can I get the Metallics JPMP34TF delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP34TF come with a warranty?
Absolutely. The Metallics JPMP34TF is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP34TF?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP34TF from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.