You may also like
Screw 10 x 2 Bgl SD T-17 Deck Scr 18 (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JSDSS10 – Frequently Asked Questions
1) What size is the Metallics JSDSS10 deck screw and how many come in a jar?
The JSDSS10 is a #10 by 2 inch bugle head deck screw, packed 100 to a jar. The jar pack is handy on a service truck or in a job box where you are pulling a handful at a time rather than opening a bulk box.
2) Do I need to pre-drill for a T-17 self-drilling deck screw?
No. The JSDSS10 carries a T-17 self-drilling point, which is a notched auger tip that cuts its own pilot hole as it drives. That is what keeps it from splitting deck boards and board ends, and it is why the screw goes in one-handed with a driver and no separate drill step.
3) Will a bugle head screw sit flush in a wood deck board or trim?
Yes. A bugle head tapers into the wood instead of stopping on the surface, so the JSDSS10 countersinks itself flush in softwood decking and trim without a separate counterbore. In harder material, back off the driver clutch so you set the head flush rather than overdriving it through the fibers.
4) Is a 2 inch #10 deck screw long enough for 5/4 decking?
Yes for the common case. 5/4 decking finishes at about 1 inch thick, so a 2 inch screw leaves roughly an inch of thread in the joist, which is the usual target. If you are fastening full 2x material (1-1/2 inches actual), 2 inches only buys you about a half inch of bite and you should step up to a longer screw.
5) Can I use the Metallics JSDSS10 deck screw for electrical rough-in work?
It is stocked as an electrical fastener, and a #10 by 2 inch self-drilling wood screw is the kind of thing used to hang strut, backer boards, plywood panels, and box mounting blocks to wood framing. For fastening into masonry, steel studs, or for sheet metal connections, this is the wrong screw and you want a screw matched to that base material.
6) What part number do I order for the Metallics 10 x 2 bugle head deck screw?
Order Metallics JSDSS10. That is the single part number covering the #10 by 2 inch bugle head T-17 self-drilling deck screw in the 100 count jar, so there is no length, head, or pack option to specify separately.
How fast can I get the Metallics JSDSS10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSDSS10 come with a warranty?
Absolutely. The Metallics JSDSS10 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSDSS10?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSDSS10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.