You may also like
Screws 10 x 2 Bgl SD T-17 Deck Scr 18 (2500 pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics SSDS10B – Frequently Asked Questions
1) Does the T-17 point on these Metallics deck screws mean I can skip pre-drilling?
Yes. The SSDS10B carries a T-17 self-drilling point, which cuts its own pilot as it drives. In pressure-treated decking, cedar, or framing lumber you drive it straight in, and the point reduces splitting when you are working close to a board end or edge.
2) Will a 2 inch #10 deck screw be long enough for 5/4 decking over joists?
Yes for most 5/4 deck boards. A 5/4 board dresses to about 1 inch thick, so a 2 inch screw leaves roughly an inch of thread biting into the joist. For full 2x decking (about 1-1/2 inches actual) you want a longer screw than the SSDS10B, since 2 inches leaves only about a half inch of penetration.
3) How many screws come in a box of Metallics SSDS10B?
Each box holds 2,500 pieces of the #10 x 2 inch bugle head deck screw. That is a bulk production quantity, so it suits deck framing and repetitive decking work rather than a one off repair where a small jar would do.
4) Are these Metallics deck screws a wood fastener or a sheet metal screw?
They are wood fasteners. The combination of a bugle head, a #10 by 2 inch body and a T-17 self-drilling wood point is a decking and framing screw, not a sheet metal or self tapping metal screw. For fastening into steel studs or strut you need a different point type.
How fast can I get the Metallics SSDS10B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics SSDS10B come with a warranty?
Absolutely. The Metallics SSDS10B is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics SSDS10B?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics SSDS10B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.