You may also like
Screw 10 x 2 Bgl Star D T-17 Deck Scr 18 (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JSDL10 – Frequently Asked Questions
1) What size screw is the Metallics JSDL10 deck screw?
The JSDL10 is a #10 by 2 inch deck screw with a bugle head and a star (Torx style) drive recess, and it carries a T-17 auger point. It comes 100 screws to a jar.
2) Is a 2 inch deck screw long enough for 5/4 decking over joists?
At 2 inches overall, the JSDL10 leaves roughly 1 inch of thread in the joist once it passes through nominal 5/4 decking (about 1 inch actual). That is the usual working length for 5/4 and 1x material. For 2x stock laid flat you want a longer screw.
3) What does the T-17 point on a deck screw actually do?
A T-17 point is a notched auger tip that cuts its own clearance as it drives, so the JSDL10 can go into dimensional lumber and decking without a pilot hole and with less tendency to split boards near ends and edges.
4) Will a bugle head screw sit flush in decking and trim without countersinking?
Yes. The bugle head on the JSDL10 has a tapered underside that pulls itself into softwood decking and trim and self-countersinks flush, which is why it is used instead of a flat washer head where appearance matters.
5) What bit do I need to drive the Metallics JSDL10?
It takes a star (Torx style) driver bit, not a Phillips or square drive. The star recess resists cam-out when you are running long screws with an impact driver, so bring the matching star bits to the job.
6) Can I use the Metallics JSDL10 for electrical mounting work, like fastening boxes or strut backing to wood?
It is sold as electrical-department fastener stock, and a #10 x 2 inch bugle head screw is commonly used by electricians to anchor plywood backboards, box brackets and backing blocks to wood framing. It is a wood screw, though: it will not thread into metal studs, masonry or sheet steel, so use a self-drilling screw or an anchor for those.
7) How many Metallics JSDL10 screws come in a jar?
Each jar holds 100 of the #10 x 2 inch deck screws. The jar pack is the handy size for a service truck or a small punch list rather than a bulk deck build, so figure your quantity by jars of 100.
8) Is there more than one version of the Metallics JSDL10 to choose from?
No options to specify. The JSDL10 is a single configuration, #10 x 2 inch bugle head star drive with the T-17 point, packed 100 to a jar. Order by the part number and the only decision left is how many jars.
How fast can I get the Metallics JSDL10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSDL10 come with a warranty?
Absolutely. The Metallics JSDL10 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSDL10?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSDL10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.