You may also like
Screw 8 x 1-1/2 Bgl Star D T-17 Deck Scr (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JSDL8 – Frequently Asked Questions
1) What size and drive type is the Metallics JSDL8 deck screw?
The JSDL8 is a #8 x 1-1/2 inch deck screw with a bugle head and a star (Torx-style) drive recess. The star drive lets you put weight behind the driver without camming out the way a Phillips does on deck boards.
2) Does the JSDL8 deck screw need a pilot hole?
No. The JSDL8 carries a T-17 point, which is a self-drilling notched tip that cuts its own path through wood and reduces splitting near board ends and edges. Drive it straight in with a star bit.
3) Will a 1-1/2 inch deck screw be long enough for my decking?
A #8 x 1-1/2 inch screw is sized for thinner stock and attachment work, not standard 5/4 or 2x decking over joists, where you want enough length to get well into the framing. Use the JSDL8 for trim boards, skirting, stair risers, fascia, and light fastening into a substrate; step up in length for structural deck board attachment.
4) How many screws come in a jar of Metallics JSDL8?
Each jar holds 100 of the #8 x 1-1/2 inch deck screws. The jar pack is the handy size for a service van or a punch-list repair rather than a full deck build, where contractors usually buy by the pound or the bulk box.
5) What bit do I need to drive Metallics JSDL8 screws?
A star drive bit. The JSDL8 uses a star recess, so a Phillips or square bit will not seat properly. Drivers are not included in the jar, so pick up the matching star bit if you do not already run one.
6) Why does the bugle head matter on this deck screw?
A bugle head pulls flush and self-countersinks into softwood without needing a pre-drilled countersink, so the finished surface stays clean and nothing snags underfoot. That is the reason the JSDL8 uses it rather than a flat or pan head.
How fast can I get the Metallics JSDL8 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSDL8 come with a warranty?
Absolutely. The Metallics JSDL8 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSDL8?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSDL8 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.