Metallics JPMP63BR Screw 6-32 x 1 PN PH MS BR (Jar 100)

Often yes for a flush box. At 1 inch, this one is sized for situations where the device sits proud of the box, such as a plaster ring, a mud ring, or a box set back behind thick drywall or tile. For a device sitting directly against the box ears, the shorter 6-32 screws that ship with the device are usually enough. Order the 1 inch length when you need to span a gap, not as a general replacement.

Pan head with a Phillips drive. The pan head gives a low, rounded profile with a flat bearing surface, so it seats against a plaster ring or box ear rather than needing a countersink the way a flat head does.

The JPMP63BR is a brass finish machine screw. The brass color is why it gets used where the screw head shows, like brass or antique-finish cover plates and wall plates, instead of a plain zinc screw that would stand out.

100 screws per jar, packed in a jar rather than a loose bag, which is what keeps a single thread size separated on the truck or on a parts shelf. If you need multiple sizes on a van, the jar packaging is what makes that workable.

Metallics part number JPMP63BR. That single number covers the 6-32 x 1 inch pan head Phillips machine screw in brass, jar of 100.

No. A machine screw has a straight, non-tapered thread and needs a tapped hole or a nut to hold, so it won't cut its own threads in wood or unthreaded sheet metal. Use it in pre-tapped box ears, plaster rings, enclosures and cover plates. For unthreaded material you want a self-tapping sheet metal screw or a wood screw instead.