You may also like
Screw 10-32 x 1/2 PN PH MS BR (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JPMP12BR – Frequently Asked Questions
1) Will a 10-32 x 1/2 inch machine screw thread into a standard switch or receptacle device yoke?
Yes. The Metallics JPMP12BR is a 10-32 machine screw, and 10-32 is the standard thread used on wiring device mounting yokes and on most device and wall plate mounting holes in North America. At 1/2 inch of length it suits mounting a device into a box or ear rather than deep-set work, where a longer 10-32 screw is needed.
2) What head style and driver does the Metallics JPMP12BR screw use?
Pan head with a Phillips recess. The pan head gives a low rounded profile with a flat bearing face, so it seats on the surface of a plate or bracket rather than countersinking into it, and it drives with a standard Phillips bit.
3) Is the JPMP12BR screw solid brass or just brass plated?
The JPMP12BR is a brass machine screw, which is why electricians reach for it where a non-ferrous fastener matters or where the exposed screw head needs to match brass trim or a brass wall plate. If you need a steel screw for strength on a structural bracket, this is not that part.
4) Can I use the JPMP12BR to mount a cover plate on a 4-inch square box with a raised ring?
Only if the hole is tapped 10-32 and the engagement depth suits a 1/2 inch screw. Raised rings and device plates are commonly 10-32, which this screw matches, but many box covers use 8-32 or 6-32 holes instead. Check the thread in the hole before ordering, and step up to a longer 10-32 if the plate stacks a gasket or spacer.
5) How many 10-32 x 1/2 brass pan head screws come in the Metallics JPMP12BR jar?
100 screws, supplied in a jar. The jar pack is what service vans and MRO shelves use for loose fastener counts, so you can pull a handful per job instead of opening a bulk box.
6) What is the Metallics part number for the 10-32 x 1/2 brass pan head Phillips machine screw?
JPMP12BR. That is the manufacturer part number to quote when ordering the 100-count jar of 10-32 x 1/2 inch brass pan head Phillips machine screws.
How fast can I get the Metallics JPMP12BR delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP12BR come with a warranty?
Absolutely. The Metallics JPMP12BR is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP12BR?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP12BR from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.