You may also like
Screw 10-32 x 1-1/2 PN PH MS BR (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JPMP75BR – Frequently Asked Questions
1) What size and thread is the Metallics JPMP75BR machine screw?
It's a 10-32 x 1-1/2 inch machine screw, so 32 threads per inch on a #10 diameter with a 1-1/2 inch length. The 10-32 thread is what matches standard electrical box and device mounting holes, including switch and receptacle straps and cover plates.
2) Is the 1-1/2 inch length too long for mounting a device in a standard outlet box?
Likely yes for a flush device. At 1-1/2 inches, this is an extension-length 10-32 screw, used for mounting devices through extension rings, mud rings, plaster rings, or thick plaster build-out where the standard 3/4 inch to 1 inch device screw won't reach. For a device sitting directly in the box, order the shorter 10-32 length instead.
3) Is the JPMP75BR a pan head Phillips screw, and what is it made of?
Pan head with a Phillips drive, in brass. Pan head gives a low rounded profile with a flat bearing face, so it seats on the surface rather than needing a countersink. Brass is the non-ferrous option, commonly specified where a non-magnetic or corrosion-resistant fastener is wanted on device and box work.
4) How many Metallics JPMP75BR screws come in a jar?
100 screws per jar, packed in Metallics' jar packaging. That's the bulk count MRO and electrical stockrooms buy for a service cart or van shelf rather than counting out singles.
5) What part number do I order for the Metallics brass 10-32 x 1-1/2 pan head screw?
Metallics part number JPMP75BR. One model covers it, so there are no finish or length options to specify, just the jar of 100.
6) Will a 10-32 machine screw thread into a self-drilling or sheet metal screw hole?
No. The JPMP75BR is a machine screw with a uniform 10-32 machine thread, meant for a pre-tapped or pre-threaded hole such as a device strap, box ear, or tapped bracket. It will not cut its own thread in sheet metal. For unthreaded sheet metal you need a sheet metal or self-drilling screw instead.
How fast can I get the Metallics JPMP75BR delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP75BR come with a warranty?
Absolutely. The Metallics JPMP75BR is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP75BR?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP75BR from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.