You may also like
Screw 10-32 x 1 PN PH MS BR (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JPMP1032BR – Frequently Asked Questions
1) Is the Metallics JPMP1032BR a brass screw, and does that matter for a ground connection?
It is a brass machine screw. Brass is conductive and corrosion resistant, which is why brass 10-32 hardware shows up on grounding terminals and in damp or outdoor locations where a plated steel screw can rust and lose a clean mechanical bond. Note this is plain brass, not a green-painted grounding screw, so if your inspector wants the green head you need a dedicated ground screw instead.
2) What head and driver does the Metallics JPMP1032BR 10-32 screw use?
Pan head with a Phillips drive. The pan head gives a low, rounded profile with a flat bearing surface, so it seats on top of the material rather than countersinking, which is what you want on a device yoke, a cover plate ear, or a strap. There is no slotted option on this screw, so you are driving it with a Phillips bit.
3) Is a 1 inch 10-32 screw too long for mounting a receptacle flush to the box?
For a device screwed straight to a flush-set box, 1 inch is longer than you need and the excess thread will run past the tapped ear into the box. The 1 inch length earns its place when the box is set back behind drywall, tile, or a plaster ring and the device has to reach across that gap. For flush work, use a shorter 10-32 machine screw.
4) Can I use the Metallics JPMP1032BR brass screw in a wood stud or drywall?
No. This is a machine screw, so it needs a pre-tapped 10-32 hole or a nut on the back side. It will not cut its own threads in wood, drywall, or an untapped sheet metal panel. For those, you want a self-tapping sheet metal screw or a wood screw rather than a 10-32 machine screw.
5) How many screws come in a jar of Metallics JPMP1032BR?
Each jar holds 100 of the 10-32 x 1 inch brass pan head Phillips machine screws. The jar pack is the usual way electricians and MRO stockrooms buy these, since it keeps loose fasteners contained on the truck or on a shelf rather than scattered in a bag.
6) What is the exact part number to order for the Metallics 10-32 x 1 brass pan head screws?
Order Metallics JPMP1032BR. That number covers the 10-32 x 1 inch brass pan head Phillips machine screw in the 100-count jar, and it is the only configuration that part number carries.
How fast can I get the Metallics JPMP1032BR delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP1032BR come with a warranty?
Absolutely. The Metallics JPMP1032BR is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP1032BR?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP1032BR from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.