You may also like
Screw 6-32 x 1/2 SHCS FH St-Blk (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JFSC612 – Frequently Asked Questions
1) Is the JFSC612 a flat head socket cap screw, and does it sit flush?
It is a flat head socket cap screw, driven with a hex key rather than a screwdriver. The flat (countersunk) head seats flush in a chamfered or countersunk hole, so nothing stands proud of the surface. If your part has a plain flat-bottom through hole with no countersink, the head will not sit flush and you want a pan or round head instead.
2) What material and finish are these Metallics 6-32 screws?
Steel with a black finish. That is a plain carbon steel fastener, not stainless, so it suits dry interior work such as panel, box, and bracket mounting. For wet locations, exterior runs, or anywhere corrosion is a concern, choose a stainless or hot-dip galvanized 6-32 screw instead.
3) Can I use a 6-32 x 1/2 inch screw to mount a receptacle or switch to a deep box?
At 1/2 inch of length, these are short. They work where the device or plate sits tight against the tapped 6-32 hole. Once you add a plaster ring, a mud ring offset, or spacer washers to bring a device forward, 1/2 inch will not reach enough thread and you need a longer 6-32 screw. Measure your stack-up before ordering.
4) What is the Metallics part number for the 6-32 x 1/2 black steel flat head socket cap screw?
JFSC612 is the Metallics manufacturer part number. Order by that number to get the 6-32 x 1/2 inch flat head socket cap screw in black steel, 100 to a jar. The J prefix is the jar pack; the same screw in a different pack quantity carries a different Metallics number.
5) Do I need a special driver for these flat head socket cap screws?
Yes, a hex key. Socket cap screws take an internal hex drive, not a Phillips or slotted bit, so a standard electrician's screwdriver will not turn them. Keep a small metric-free SAE hex key set or hex bit set on hand if you are installing these in volume.
How fast can I get the Metallics JFSC612 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFSC612 come with a warranty?
Absolutely. The Metallics JFSC612 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFSC612?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFSC612 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.