You may also like
Screw 6 x 1-1/4 PH FH SD #2 St-Zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JTEKDF64 – Frequently Asked Questions
1) What size and head style is the Metallics JTEKDF64 screw?
The JTEKDF64 is a #6 x 1-1/4 inch screw with a Phillips flat head, driven with a #2 Phillips bit. It is a self-drilling type in steel with a zinc finish. The flat head sits flush when the material is countersunk, so it is the one to pick where a pan or hex head would stand proud of a plate or bracket.
2) Do I need to pre-drill for these #6 self-drilling screws?
No pilot hole needed. The JTEKDF64 is a self-drilling (SD) screw, so the point cuts its own hole as you drive it into thin steel or similar light-gauge material. That is the difference between this and a plain self-tapping screw, which still wants a drilled hole.
3) Is a zinc plated steel screw okay for outdoor or damp locations?
The JTEKDF64 is steel with a zinc plating, which is a mild corrosion coating meant for dry interior work, not weather exposure. For exterior, wet, or coastal work, specify a stainless or hot dip galvanized fastener instead of this one.
4) What bit do I need to drive the JTEKDF64 screws?
A #2 Phillips bit. The head is a Phillips flat head sized for a #2 driver, which is the standard bit most electricians already have in the impact driver, so no special tooling is involved.
How fast can I get the Metallics JTEKDF64 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKDF64 come with a warranty?
Absolutely. The Metallics JTEKDF64 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKDF64?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKDF64 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.