You may also like
Screw 6 x 1 PH FH SD #2 St-Zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JTEKDF27 – Frequently Asked Questions
1) Is the JTEKDF27 a self-drilling screw, or do I need to pilot the hole first?
Self-drilling. The SD designation in Metallics JTEKDF27 means the point cuts its own hole, so you can drive straight into light-gauge steel studs, track, or sheet metal without pre-drilling.
2) What driver bit do I need for these Metallics self-drilling screws?
A #2 Phillips bit. That's the standard bit most electricians and drywall crews already have in the pouch, so no special driver is needed.
3) Are these zinc-plated screws okay for outdoor or wet locations?
These are steel with a zinc plating, which is a dry, indoor-rated finish. For exterior, damp, or corrosive locations, specify a stainless or hot-dip galvanized fastener instead rather than relying on zinc plating.
4) How many screws come in a jar of Metallics JTEKDF27?
100 screws per jar. The jar packaging is handy for van stock and bench use, since it reseals and won't split like a bag when it gets tossed in a gang box.
5) What is the Metallics part number for the #6 x 1 inch Phillips flat head self-drilling screw?
Order it as Metallics JTEKDF27. That number covers the #6 x 1 inch Phillips flat head self-drilling steel zinc screw in the 100-count jar.
6) What are these screws typically used for on an electrical job?
They're an electrical-trade fastener, used for mounting boxes, straps, brackets, plates, and device hardware to light-gauge metal. The self-drilling point and flush flat head make them a one-step fastener where a panhead would stand proud of the surface.
How fast can I get the Metallics JTEKDF27 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKDF27 come with a warranty?
Absolutely. The Metallics JTEKDF27 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKDF27?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKDF27 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.