You may also like
Screw 6 x 3/4 PH FH SD #2 St-Zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JTEKDF63 – Frequently Asked Questions
1) Do I need to pre-drill for the JTEKDF63 screw?
No. The SD designation means it's a self-drilling screw, so the point cuts its own hole in thin metal or in wood without a pilot. Keep steady pressure and let the point do the cutting; in thin gauge steel it will walk if you start it at an angle.
2) Is the Metallics JTEKDF63 screw okay for outdoor or damp locations?
It's zinc plated steel, which is a dry-location and light-duty corrosion finish. Fine for interior electrical work, panels, boxes, and bracket mounting. For wet, coastal, or exterior exposure, step up to a stainless or hot-dip galvanized fastener instead; zinc plating will eventually rust through in standing moisture.
3) How many screws come in a jar of Metallics JTEKDF63?
100 screws per jar. The jar pack is the usual way these go on a service van or a shop shelf, since the wide-mouth container lets you scoop a handful without spilling a box. If you're standardizing a crew, order by the jar rather than counting pieces.
4) What part number do I order for the Metallics 6 x 3/4 self-drilling flat head screw?
The manufacturer part number is JTEKDF63 from Metallics. One part number covers the whole jar, so a single line item gets you the 100-count jar of #6 x 3/4 inch Phillips flat head self-drilling zinc plated screws.
How fast can I get the Metallics JTEKDF63 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKDF63 come with a warranty?
Absolutely. The Metallics JTEKDF63 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKDF63?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKDF63 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.