You may also like
Screwdriver Pwr Bit Hx 1/4" Phillips 12-14 Point #3 3" (1pc)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics 125P3B – Frequently Asked Questions
1) Will the Metallics 125P3B bit fit a standard drill chuck or an impact driver?
It has a 1/4 inch hex power shank, so it drops straight into a 1/4 inch quick-change holder on an impact driver or into a standard drill chuck. That hex shank is the common power-bit interface, not a screwdriver handle fitting.
2) What screw size does a #3 Phillips power bit drive?
The Metallics 125P3B is a #3 Phillips point, which is the size used on larger screws, typically #10 through #16 gauge. If you are driving #6 or #8 sheet metal or drywall screws, a #3 will cam out or ride high in the recess and you want a #2 point instead.
3) How long is the Metallics 125P3B Phillips bit?
Three inches overall. The extra length over a 1 inch insert bit lets you reach screws down inside a box, a recessed strut channel, or behind a panel without adding an extension holder.
4) Is this a power bit or an insert bit, and do I need a separate holder?
It is a power bit, meaning the 1/4 inch hex shank runs the full 3 inch length and mounts directly in the tool. No magnetic insert-bit holder is required, unlike a short 1 inch insert bit which cannot be chucked on its own in most quick-change systems.
5) What is the Metallics part number for a 3 inch #3 Phillips power bit?
125P3B is the Metallics manufacturer part number for the 3 inch, #3 Phillips, 1/4 inch hex power bit. Use that number when ordering or cross-referencing, since Metallics distinguishes points and lengths only by the suffix.
6) Does the Metallics 125P3B come as a single bit or a multi-pack?
One bit per order, supplied in a pouch. If you are stocking a van or a shop for production driving, order the quantity you need rather than assuming a pack.
7) Is the Metallics 125P3B intended for electrical work?
Yes, it is part of the Metallics electrical fastener line, the same line as their screws and anchors, so it is stocked for electricians driving larger Phillips-head fasteners on boxes, straps, and supports. Nothing about the bit restricts it to electrical use, though, a #3 Phillips drives the same screws on any trade's job.
How fast can I get the Metallics 125P3B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics 125P3B come with a warranty?
Absolutely. The Metallics 125P3B is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics 125P3B?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics 125P3B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.