You may also like
Metallics JRMB98 10-32 x 1 in. Round Head Slotted Machine Screws - Brass - Each
Model: MET-JRMB98
10-32 x 1 in. Round Head Slotted Machine Screws - Brass - 100qty
Additional Notes
Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as...
Metallics
$192.86
Screws 10-32 x 1 Round Head Combinati (100 pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics SBRM98 – Frequently Asked Questions
1) What thread size and length are the Metallics SBRM98 round head screws?
They are 10-32 x 1 inch machine screws, so a 10-32 thread with a 1 inch length under the round head. The 10-32 thread is the standard machine screw thread used on electrical device boxes, plaster rings and fixture straps, which is where this size normally gets used.
2) Will a 10-32 x 1 inch round head screw work for mounting a fixture to an electrical box?
It will thread into any 10-32 tapped hole, which is what box ears, mounting straps and plaster rings use. The 1 inch length gives you room to pass through a strap or canopy and still pick up enough thread. If your assembly stacks thicker than that, step up to a longer 10-32; if you are only catching a thin ear, a shorter one will keep you from bottoming out inside the box.
3) What driver do I need for the Metallics SBRM98 screws?
They have a combination head, so either a flat blade or a Phillips driver will seat in them. Handy on a panel job where you are already holding one or the other, and it means an electrician's 11-in-1 works without swapping bits.
4) How many screws come in a pack of Metallics SBRM98?
One hundred pieces per pack. That is a bulk count rather than a per-device bag, so it suits a truck stock or shop bin where 10-32 x 1 inch screws get pulled a few at a time.
5) Is the Metallics SBRM98 a machine screw or a self-tapping screw?
It is a machine screw. The 10-32 thread is a straight machine thread meant for a pre-tapped hole or a nut, not for cutting its own threads in sheet metal. For an untapped hole you want a sheet metal or self-drilling screw instead.
6) What is the model number to order these round head combination screws?
Order Metallics part SBRM98. It is a single configuration, 10-32 x 1 inch round head combination, 100 pieces.
How fast can I get the Metallics SBRM98 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics SBRM98 come with a warranty?
Absolutely. The Metallics SBRM98 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics SBRM98?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics SBRM98 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.