You may also like
SDC BP Series Square Bollard Posts for Access Control, 6" x 6", BPS6 Surface Mount 42" and BPG6 In-Ground 54"
Model: SDC-BP
SDC BP Series Square Bollard Posts for Access ControlThe SDC BP Series square bollard posts mount push plates, ADA actuators, card readers, keypads, and access panels at freestanding entry points...
SDC
Starting at
$479.00
$326.76
SDC 480V Series Vestibule Push Plate Actuators with Dual Switch Activation
Model: SDC-480V
SDC 480V Series Vestibule Push Plate Actuators with Dual Switch ActivationProfessional ADA-Compliant Automatic Door Activation SolutionThe SDC 480V Series vestibule push plate actuators provide...
SDC
Starting at
$439.00
$308.49
Camden CM-42 Series Dual Switch Prep, 42" Tall Mounting Post
Model: CM-42-ESU
CAMDEN CM-42 SERIES DUAL SWITCH PREP, 42" TALL MOUNTING POST
Camden mounting posts offer a superior method of mounting a switch, keypad, card reader, or other door activation device, when mounting...
Camden Door Controls
Starting at
$730.00
$634.16
Camden CM-35 Series OBC Compliant Narrow Push Plate Switch, Handicap Symbol/Push To Open
Model: CM-CM-35
Camden CM-35 Series OBC Compliant Narrow Push Plate Switch, Handicap Symbol/Push To Open
CM-25, CM-26CB, CM-35 and CM-35N Series all-active switches are heavy-duty, ADA-compliant door controls. CM-25...
Camden Door Controls
Starting at
$75.00
$68.06
Camden CM-42 Series CM-7536 Switch Prep, 42" Tall Mounting Post, 6" x 6"
Model: CM-42-DSU
CAMDEN CM-42 SERIES CM-7536 SWITCH PREP, 42" TALL MOUNTING POST
Camden mounting posts offer a superior method of mounting a switch, keypad, card reader, or other door activation device, when mounting...
Camden Door Controls
Starting at
$590.00
$503.65
SDC CBC Series Square Dual Switch Bollard Post with Push Plates - 6"; x 42"; CBC Compliant
Professional Access Control Bollard Solution
The SDC CBC Series bollard post provides a practical alternative to wall-mounted access control switches for entry doors, offering enhanced visibility while meeting accessibility guidelines. This 6"; square dual switch bollard features 1/8"; walls with standard prep located 36"; from finished floor and includes push plates for complete installation. Designed for surface mount applications with California Building Code (CBC) Section 11B 404.3 compliance certification.
Professional Features & Benefits
- CBC Code Compliance: Certified to California Building Code Section 11B 404.3 for accessibility compliance in commercial applications.
- Dual Switch Configuration: High-low switch placement at 36"; from finished floor provides accessibility options for all users.
- Heavy-Duty Construction: 6"; square profile with 1/8"; walls delivers robust durability for high-traffic commercial environments.
- Complete Installation Package: Includes push plates and black HDPE mortised removable cap for immediate deployment.
- Secure Transmitter Mount: Integrated mounting provisions accommodate wireless transmitters for flexible access control integration.
- Enhanced Visibility: Bollard design provides superior visibility compared to wall-mounted alternatives for improved user awareness.
- Surface Mount Design: Eliminates complex in-ground installation requirements while maintaining professional appearance and functionality.
Technical Specifications
- Commercial/Residential: Commercial
- Department: Door Hardware
- Electronic: Yes
- PDF:SDC Full Catalog: https://zensupply.com/content/pdf/lcn/CondensedHardwareBrochure
- Product Category: Electronic Access Controls
- Product Dimension: 6"; x 6"; x 42";
- Product Group: Electronic Access Controls
- Product Model: CBC482A4U
- Product Subgroup: Sensors, Switches, Relays and Timers
- Product Type: Push Plates
- Series: CBC Series
- Subcategory: Push Plates
Professional Applications
- Commercial Building Entry Points
- Healthcare Facility Access Control
- Educational Institution Security Systems
- Government and Municipal Buildings
- Multi-Tenant Residential Properties
- Retail Establishment Access Management
- Industrial Facility Entry Control
Why Choose SDC Quality?
SDC CBC Series bollard posts deliver professional-grade access control solutions with California Building Code Section 11B 404.3 certification for accessibility compliance. The heavy-duty 6"; square construction with 1/8"; walls and dual switch configuration provides reliable performance in demanding commercial applications. Engineered for surface mount installation with complete push plate integration for immediate deployment and long-term dependability.
Manufacturer Resources
SDC Full Catalog
Product Specs
- Subcategory:
- Push Plates
- Series:
- CBC Series
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Sensors, Switches, Relays and Timers
- Product Type:
- Push Plates
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Product Model:
- CBC482A4U
- Product Dimension:
- 6" x 6" x 42"
- Product Category:
- Electronic Access Controls
- Department:
- Door Hardware
SDC CBC482A4U – Frequently Asked Questions
1) Should I use a bollard post or a wall-mounted push plate for my automatic door actuator?
Go with a wall plate when there is usable wall or jamb within reach of the approach path, since it is cheaper and faster to mount. Choose a post like the CBC482A4U when the approach is across open floor or paving with no wall at the right spot, or where the actuator needs to be visible from a distance. If a wall plate is what you need, ZenSupply carries the Camden CM-40 Series 4-1/2 inch round switch and CM-60 Series 6 inch round switch, and the Locknetics PPH-100-PL large round push plate with box.
2) Does this SDC bollard meet California accessibility code for a door actuator?
The CBC482A4U is certified to California Building Code Section 11B 404.3 for accessibility compliance in commercial applications, with the switch prep set at 36 inches above finished floor. That is the specific compliance claim carried on the product; treat any other rating as unstated.
3) Can I run the SDC CBC bollard wireless instead of pulling conduit to it?
The post has integrated mounting provisions for a wireless transmitter, so the actuator signal can be sent to the operator receiver rather than hard-wired through the slab. That is the practical reason to pick this post on a retrofit where there is no path for conduit under an existing walkway.
4) For a door that needs a timed hold on the actuator, what should I use instead of the SDC CBC482A4U?
The SDC CBC482A4U is a bollard post with push plates and provisions for mounting a wireless transmitter; the delay, if any, comes from the door operator control. The Alarm Controls JP Series is a pneumatic time delay jumbo push plate, and the PD Series covers pneumatic time delay PD, PN, PS and PT vandal resistant push plates, so the delay is built into the plate itself. On a job where the control board will not provide the hold, a pneumatic plate puts that timing at the actuator.
5) Can I swap a Locknetics PPH-100-PL push plate in place of the SDC CBC482A4U?
No, they are different pieces of the assembly. The Locknetics PPH-100-PL is a large round push plate supplied with a box, in black or aluminum, so it is the actuator and its enclosure for a wall or column mount. The SDC CBC482A4U is a freestanding 6 inch square bollard post, 6 by 6 by 42 inches, surface mounted with standard prep at 36 inches from finished floor and push plates included. A PPH-100-PL replaces a plate; it does not replace the post an approach without a wall requires.
6) Why does the SDC CBC bollard have two push plates on it?
It is a high-low arrangement. Two actuators at different heights on the same post let a standing user and a seated user each reach one comfortably, with the standard prep located 36 inches from finished floor. That dual-switch layout is the reason this post is offered rather than a single-actuator bollard.
7) How heavy is the bollard tube itself, and will it hold up in a parking-side entry?
The tube is a 6 inch square section with 1/8 inch walls, which is what carries the abuse in a high-traffic commercial entry. It is a commercial-rated product, not a residential one. Note that this is an actuator post, not a vehicle-impact barrier, so it should not be treated as crash protection.
8) Do I have to buy the push plates separately with the SDC CBC482A4U?
No. The push plates come with the post, along with a black HDPE mortised removable cap for the top. What you still supply is the anchors into your walking surface, the wiring or wireless transmitter, and the door operator itself.
9) I need a wireless actuator on a bollard for a California job. How do the SDC CBC482A4U and the Camden CM-60 differ on that?
Both accommodate wireless. The Camden CM-60 is offered wired or with a kinetic wireless transmitter, so the transmitter is part of the switch itself. The SDC CBC482A4U carries integrated mounting provisions that accommodate wireless transmitters, and the post is certified to California Building Code Section 11B 404.3 with its dual high-low prep at 36 inches from finished floor. Where the CBC citation has to be met by the actuator location, the bollard is the piece that establishes it.
10) How do I get to the wiring inside an SDC CBC bollard after it is installed?
The cap on top is a mortised removable HDPE cap, so the top of the tube opens for access to the switch wiring or a transmitter mounted inside rather than being welded shut. That matters on service calls where a battery or transmitter has to be swapped without pulling the post.
11) Is the SDC CBC482A4U a square or a round bollard?
Square. The section is 6 x 6 inches over a 42 inch height. If a round profile is what matches the rest of the site furniture, that is a different post, not an option on this model.
How fast can I get the SDC CBC482A4U delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SDC CBC482A4U come with a warranty?
Absolutely. The SDC CBC482A4U is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SDC CBC482A4U?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the SDC CBC482A4U from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.