SEPCO LB Conduit Body in Coppe...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$5.95
SEPCO LB Conduit Body in Copper-Free Die Cast Aluminum with Matching Cover and Gasket

SEPCO LB Conduit Body in Copper-Free Die Cast Aluminum with Matching Cover and Gasket

(No reviews yet) Write a Review

Model: LB1ACG

In Stock (leaves warehouse same day if ordered before 3pm ET)

$5.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SEPCO LB Conduit Body in Copper-Free Die Cast Aluminum with Matching Cover and Gasket

The SEPCO LB Conduit Body is a Type LB fitting engineered from copper-free die cast aluminum, giving electricians a lightweight yet corrosion-resistant body for changing conduit direction while providing convenient access to pull and splice conductors. This family is available in trade sizes from 1/2" through 4", and each body ships complete with a factory-matched die cast cover and gasket, simplifying installation and helping keep the enclosure sealed against dust and moisture intrusion. The copper-free aluminum construction makes this conduit body a practical choice for raceway systems where copper-free materials are specified, and its Type LB configuration supports back-to-back or side-entry conduit runs common in commercial and industrial wiring layouts.

Key Features

  • Trade Size Range: Available in trade sizes from 1/2" through 4" to fit a wide range of conduit runs.
  • Type LB Configuration: The LB body style allows conduit to enter and exit at a right angle on the same side, making it easy to route conduit around obstructions while maintaining wire-pulling access.
  • Durable Construction: Die cast from copper-free aluminum alloy for a lightweight, corrosion-resistant conduit body suited to environments where copper content restrictions apply.
  • Included Cover: A matching die cast cover is included, providing a secure closure over the wiring compartment once conductors are pulled and terminated.
  • Included Gasket: A cover gasket is included to help seal the conduit body against moisture and dust at the cover joint.
  • Factory-Matched Set: Cover and gasket are matched to each body size at the factory for straightforward field installation without sourcing separate accessories.
  • Conductor Access: The open body design gives installers room to pull, bend, and splice conductors before the cover is fastened back into place.

Technical Specifications

  • Product Material: Die-Cast Aluminum
  • Trade Size: 1/2" - 4"

Typical Applications

  • Commercial and Industrial Conduit Systems
  • Conduit Direction Changes and Pull Points
  • Raceway Installations Requiring Copper-Free Materials
  • Conductor Splicing and Junction Locations
  • New Construction and Electrical Renovation Projects
  • Electrical Contractor and MRO Stock Applications

Why SEPCO?

SEPCO builds this LB conduit body from copper-free die cast aluminum and pairs each size with a matching cover and gasket, giving installers a complete, ready-to-mount fitting across the full 1/2" through 4" size range. Choosing a factory-matched cover and gasket set helps ensure a proper fit at the enclosure joint, supporting a clean, reliable installation for conduit routing on commercial and industrial jobs. Stocking the SEPCO LB Conduit Body across the sizes you need reduces the need to source covers and gaskets separately, saving time on the jobsite.

Manufacturer Resources

SEPCO Product Catalog

Product Specs

list_batch:
SEP-20260911
Product Type:
Type LB Conduit Body
Configuration:
Type LB
Department:
Electrical
Product Group:
Conduit & Raceway
Product Subgroup:
Conduit Bodies & Covers
Product Material:
Die-Cast Aluminum

SEPCO LB1ACG – Frequently Asked Questions

1) Does the SEPCO LB conduit body come with a cover and gasket, or do I order those separately?
Both are in the box. Every SEPCO LB body ships with a die cast cover and a cover gasket, factory matched to that body size, so you are not chasing a separate cover and gasket part number for each size on the job. The gasket seals the cover joint against dust and moisture.
2) Is this LB body copper-free aluminum for a hazardous or marine spec that restricts copper content?
The SEPCO LB is die cast from copper-free aluminum alloy, which is the material called out on jobs and raceway systems where copper content is restricted. It is also lighter than an iron body of the same size and corrosion resistant.
3) Will an aluminum LB body hold up in a wet or corrosive location, or should I use a PVC-coated one?
Copper-free die cast aluminum with a gasketed cover handles general outdoor and damp commercial work and resists corrosion. For aggressive chemical exposure, wash-down areas, or a spec that calls for a coated ferrous fitting, step to a PVC-coated iron body instead: ZenSupply carries the Ocal Form 7 PVC-coated LB conduit body in iron, and the Ocal LB17-G Series LB-shape body, also Form 7. Those are iron under the coating, so they are heavier than the SEPCO aluminum body for the same trade size.
4) What is the difference between the SEPCO LB conduit body and an Ocal Form 7 PVC-coated LB body?
They are both Type LB conduit bodies, so they route conduit through a right angle on the same side and give access for pulling and splicing, but the materials differ. The SEPCO LB is die cast from copper-free aluminum and ships with a matching die cast cover and gasket in trade sizes 1/2 inch through 4 inch. The Ocal Form 7 LB conduit body is an iron body with a PVC coating. Choose the SEPCO aluminum body where copper-free materials are specified and a lighter fitting is wanted; choose the PVC-coated iron body where the spec calls for a coated ferrous fitting.
5) For a corrosive outdoor conduit run, should I use the SEPCO aluminum LB body or a PVC-coated option?
The SEPCO LB conduit body is die cast copper-free aluminum, which gives a corrosion-resistant, lightweight fitting and includes a cover gasket to help seal the cover joint against moisture and dust. Where the specification calls for a coated ferrous fitting instead of bare aluminum, the Ocal Form 7 PVC-coated LB conduit body is an iron body with a PVC coating and covers the same Type LB routing function. Match whichever one the drawing or corrosion schedule specifies for the environment.
6) What trade sizes does the SEPCO LB conduit body come in?
Eight sizes: 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2 and 4 inch trade size. Part numbers run LB1ACG for 1/2 inch, LB2ACG for 3/4, LB3ACG for 1 inch, LB4ACG for 1-1/4, LB5ACG for 1-1/2, LB6ACG for 2 inch, LB7ACG for 2-1/2 and LB10ACG for 4 inch. Order by the trade size of the conduit entering the body, not the conductor size.
7) Can I use an LB conduit body as a splice point, or is it only for pulling?
The open body gives room to pull, bend, and splice conductors before the cover is fastened down, and splicing and junction locations are a listed application for the SEPCO LB. Keep in mind the usable volume is fixed by the body size, so on larger conductor counts step up the trade size or use a pull box.
8) Is the Ocal LB17-G a direct replacement for a SEPCO LB conduit body?
Both are LB-shape conduit bodies, so the conduit routing geometry is the same idea, but they are not the same fitting. The Ocal LB17-G is a Form 7 LB-shape conduit body, while the SEPCO LB is a copper-free die cast aluminum Type LB body supplied with a factory-matched die cast cover and gasket for each trade size from 1/2 inch to 4 inch. Confirm trade size and the material called out on the job before swapping one for the other, since covers and gaskets are matched to the body.
9) Do I have to buy the cover and gasket separately like with some other LB conduit bodies?
No. Each SEPCO LB conduit body ships complete with a die cast cover and a gasket matched at the factory to that body size, across the 1/2 inch through 4 inch trade size range, so there is no separate cover or gasket line to order. If you are comparing against the Ocal Form 7 PVC-coated iron LB body, verify the cover arrangement for that fitting against its own catalog data before ordering.
10) I need to match the LB bodies already on the building. How do I know these will look and seal the same across sizes?
Across all eight trade sizes the SEPCO LB uses the same copper-free die cast aluminum body with a matching die cast cover and gasket, so a facility stocking them gets a consistent fitting from 1/2 inch up to 4 inch. If your existing fittings are PVC-coated iron, an aluminum body will not match them visually or in material, and mixing dissimilar metals in a corrosive location is worth avoiding.
How fast can I get the SEPCO LB1ACG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SEPCO LB1ACG come with a warranty?
Absolutely. The SEPCO LB1ACG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SEPCO LB1ACG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SEPCO LB1ACG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!