SEPCO T1ACG Type T Conduit Bod...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$7.45
SEPCO T1ACG Type T Conduit Body, Copper-Free Die-Cast Aluminum, Gasketed Cover Included

SEPCO T1ACG Type T Conduit Body, Copper-Free Die-Cast Aluminum, Gasketed Cover Included

(No reviews yet) Write a Review

Model: T1ACG

In Stock (leaves warehouse same day if ordered before 3pm ET)

$7.45
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SEPCO T1ACG Type T Conduit Body, Copper-Free Die-Cast Aluminum, Gasketed Cover Included

The SEPCO T1ACG Type T conduit body is engineered from copper-free, die-cast aluminum and is available across the family's full trade size range from 1/2" through 1" to fit a variety of conduit runs. Each T1ACG ships complete with a matching cover and gasket, giving contractors a ready-to-mount access and pulling point without sourcing separate parts. The copper-free aluminum formulation is designed for compatibility with aluminum conduit and raceway systems, helping avoid the galvanic corrosion that can occur when incompatible metals are paired on a job site. The Type T configuration provides three-way access along a straight conduit run, making this body useful for pulling, splicing, and inspecting conductors without disassembling the surrounding conduit system.

Key Features

  • Trade Size Range: Available in 1/2", 3/4", and 1" trade sizes to match a variety of conduit runs.
  • Type T Configuration: Provides a three-way access point along a straight conduit run, simplifying conductor pulling, splicing, and inspection.
  • Durable Construction: Die-cast aluminum body offers a rugged, corrosion-resistant housing suited for demanding conduit installations.
  • Copper-Free Formulation: The aluminum alloy is free of copper content, reducing the risk of galvanic corrosion when paired with aluminum conduit and fittings.
  • Cover and Gasket Included: Ships with a matching cover and gasket, delivering a complete, ready-to-install assembly right out of the box.
  • Gasketed Seal: The included gasket helps seal the cover against the body, supporting a cleaner enclosure for the conductors inside.
  • Conduit Body Design: Offers an accessible junction point for wire pulling, easing labor during initial installation and later maintenance or troubleshooting.

Technical Specifications

  • Trade Size: 1/2" - 1"

Typical Applications

  • Commercial and Industrial Electrical Conduit Systems
  • Aluminum Conduit and Raceway Installations
  • Branch and Tee Wire Pulling Points
  • New Construction and Conduit System Renovations
  • Panelboard and Feeder Conduit Runs

Why SEPCO?

SEPCO builds the T1ACG Type T conduit body from copper-free, die-cast aluminum across the 1/2" through 1" trade size range, giving electrical contractors a corrosion-resistant access point sized for aluminum conduit installations of varying scale. Each unit ships with a matching cover and gasket, so contractors can source the body, cover, and gasket together as one SEPCO part number and avoid pairing mismatched hardware on the job site. For professionals who need a dependable Type T access point across a full range of aluminum conduit runs, the SEPCO T1ACG offers straightforward, code-friendly functionality.

Manufacturer Resources

SEPCO Product Catalog

Product Specs

list_batch:
SEP-20260911
Product Type:
Type T Conduit Body
Configuration:
Type T
Department:
Electrical
Product Group:
Conduit & Raceway
Product Subgroup:
Conduit Bodies & Covers
Product Material:
Copper-Free Die-Cast Aluminum

SEPCO T1ACG – Frequently Asked Questions

1) What trade sizes does the SEPCO T1ACG Type T conduit body come in, and what part number do I order for each?
Three trade sizes cover the T1ACG family: 1/2 inch is the T1ACG, 3/4 inch is the T2ACG, and 1 inch is the T3ACG. Each part number includes the matching cover and gasket, so you order one number rather than body, cover, and gasket separately.
2) Do I need to buy the cover and gasket separately for a SEPCO T1ACG conduit body?
No. The T1ACG ships with a matching cover and gasket in the box, so it mounts as a complete assembly. That matters on a punch list where mismatched covers are a common cause of callbacks.
3) Is a copper-free aluminum conduit body safe to use on aluminum rigid conduit?
Yes, that is exactly what the alloy is for. The T1ACG is cast from copper-free die-cast aluminum, which avoids the galvanic corrosion that shows up when copper-bearing alloys are threaded onto aluminum conduit and raceway. On aluminum runs in damp or coastal environments, that pairing is the whole point of specifying a copper-free body.
4) My spec calls for PVC-coated conduit bodies. Is the SEPCO T1ACG an acceptable substitute?
No. The T1ACG is bare copper-free die-cast aluminum, not a coated product. If the drawing calls out PVC-coated, use the Ocal T38-4X-G Form 8 Type T, which is PVC-coated. Swapping in an uncoated aluminum body on a coated conduit system also breaks the coating continuity the spec exists to maintain.
5) What Type T conduit body should I use instead of the SEPCO T1ACG in a washdown or corrosive area that needs a NEMA 4X enclosure?
For a wet, washdown, or chemically aggressive location, look at the Ocal T38-4X-G, a Form 8 Type T conduit body in PVC-coated construction with a NEMA 4X rating. The SEPCO T1ACG family is copper-free die-cast aluminum with a gasketed cover included, intended for aluminum conduit and raceway runs where matching metals avoids galvanic corrosion; the Ocal adds a bonded PVC jacket over the body and carries the 4X rating for corrosive and hose-down service. Both provide the same three-way Type T access along a straight run for pulling, splicing, and inspecting conductors.
6) Is the SEPCO T1ACG a direct substitute for the Ocal T38-4X-G Type T conduit body?
They are not interchangeable choices for the same opening. Both are Type T conduit bodies giving three-way access on a straight conduit run, but the Ocal T38-4X-G is a Form 8 PVC-coated body with a NEMA 4X rating, while the SEPCO T1ACG runs in copper-free die-cast aluminum in 1/2-inch, 3/4-inch, and 1-inch trade sizes with a matching cover and gasket in the box. If the specification on the drawing calls for PVC-coated rigid fittings, the aluminum SEPCO body does not meet it; if the run is aluminum conduit in a dry commercial or industrial interior, the T1ACG is the metal-compatible match.
7) Can I use the SEPCO T1ACG outdoors or in a wet location?
The T1ACG is a gasketed aluminum body, and the included gasket seals the cover to the body for a cleaner enclosure around the conductors. For a job that calls for a specific NEMA rating, look at a rated body instead: the Ocal T38-4X-G is a Form 8 Type T in PVC-coated steel rated NEMA 4X, which is the usual choice for corrosive or washdown areas.
8) If I only need a pull point on a 3/4-inch aluminum conduit run, which Type T body is the simpler pick?
The SEPCO T2ACG, the 3/4-inch trade size in the T1ACG family, ships as a complete assembly with the body, cover, and gasket under one part number, so there is nothing else to source for a straight pulling and splicing point on aluminum conduit. Its copper-free die-cast aluminum alloy is formulated to pair with aluminum conduit and fittings without the galvanic corrosion risk of mixed metals. The Ocal T38-4X-G is the PVC-coated, NEMA 4X-rated alternative and is specified where the environment, not the conduit material, drives the selection.
9) Where would a contractor actually use a SEPCO T1ACG on a commercial job?
Typical placements are branch and tee pulling points in commercial and industrial conduit systems, aluminum conduit and raceway installs, and panelboard or feeder runs. It also earns its keep on renovations, where an accessible junction point means later troubleshooting does not require tearing out conduit.
How fast can I get the SEPCO T1ACG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SEPCO T1ACG come with a warranty?
Absolutely. The SEPCO T1ACG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SEPCO T1ACG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SEPCO T1ACG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!