SharkBite 24629LF Frost Free S...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$57.11
SharkBite 24629LF Frost Free Sillcock, 1/2-in PTC x 3/4-in Hose Thread, 10-in

SharkBite 24629LF Frost Free Sillcock, 1/2-in PTC x 3/4-in Hose Thread, 10-in

(No reviews yet) Write a Review

Model: 24629LF

In Stock (leaves warehouse same day if ordered before 3pm ET)

$57.11
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SharkBite 24629LF Frost Free Sillcock, 1/2-in PTC x 3/4-in Hose Thread, 10-in

The SharkBite 24629LF is a 10-in frost-free sillcock built for installing a new outdoor hose bib or replacing an existing one without soldering, gluing, or specialty tools. The inlet is a 1/2-in push-to-connect fitting compatible with copper, PEX, CPVC, or PE-RT pipe, and the outlet is a 3/4-in male garden hose thread connection with a multi-turn handle for smooth on/off flow control. Simply insert the pipe into the fitting and the internal stainless steel teeth grip the pipe while an O-ring compresses to form a watertight seal – no unions or fasteners required.

Key Features

  • Trade Size: 1/2-in push-to-connect inlet x 3/4-in male garden hose thread outlet, overall 10-in length.
  • Push-to-Connect Design: No solder, glue, unions, or tools required for installation, saving labor time on rough-in and replacement jobs.
  • Pipe Compatibility: Push-to-connect inlet works with copper, PEX, CPVC, or PE-RT pipe, giving flexibility across different plumbing systems.
  • Rotatable Fitting: The fitting can be rotated on the pipe after installation, making alignment easier when working in tight spaces.
  • Demount Capability: A demount clip (sold separately) allows the pipe to be released from the fitting when disassembly is needed, so the sillcock can be removed and reused.
  • Multi-Turn Valve: Multi-turn handle provides smooth on/off flow control at the hose bib.
  • Frost-Free Configuration: 10-in length sillcock designed to help protect against freeze damage in exterior wall installations.

Technical Specifications

  • Inlet Connection: 1/2-in Push-to-Connect
  • Outlet Connection: 3/4-in Male Garden Hose Thread
  • Overall Length: 10-in
  • Pipe Compatibility: Copper, PEX, CPVC, PE-RT
  • Valve Type: Multi-Turn Handle
  • Packaging: 4 ea

Typical Applications

  • New Construction Exterior Hose Bib Installation
  • Replacement of Existing Frost-Free Sillcocks
  • Residential and Light Commercial Outdoor Water Supply
  • Renovation Projects Requiring Fast, Tool-Free Connections
  • Retrofit Jobs Where Soldering Is Impractical

Why SharkBite?

SharkBite's push-to-connect technology uses stainless steel teeth and a compression O-ring to create a secure, reusable seal without soldering, glue, or specialty tools, and the design allows for easy disassembly with a demount clip when changes are needed. For plumbers and contractors, the 24629LF frost-free sillcock delivers a straightforward install with broad pipe compatibility across copper, PEX, CPVC, and PE-RT, reducing time spent on outdoor hose bib rough-in and replacement work.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
SHK-20260923
Product Type:
Sillcock
Connection Type:
Push-Fit
Configuration:
Multi-Turn
Department:
Plumbing
Product Subgroup:
Valves
Product Size:
1/2"
Product Group:
Valves

SharkBite 24629LF – Frequently Asked Questions

1) Will the SharkBite 24629LF sillcock connect to my existing 1/2-inch copper stub, or do I need PEX?
Either works. The inlet on the 24629LF is a 1/2-inch push-to-connect fitting rated for copper, PEX, CPVC, or PE-RT pipe, so you push it onto whatever 1/2-inch supply line is already in the wall. Stainless steel teeth grip the pipe and an O-ring seals it, so there is no soldering, glue, or union needed on the inlet side.
2) Is a 10-inch frost-free sillcock long enough for my exterior wall?
The 24629LF is a 10-inch overall length frost-free sillcock, which covers a typical insulated 2x4 exterior wall with sheathing and siding. The point of the length is to put the valve seat inside the heated building envelope so water drains out of the barrel when the hose is removed. Measure from the outside face of your siding to where the supply line sits: if that run is deeper than 10 inches, the valve seat ends up in the cold zone and you want a longer barrel instead.
3) If I need to take this hose bib off later, can the push-fit connection be released?
It can. The connection is demountable with a SharkBite demount clip, which is sold separately and is not in the box. The clip collapses the collet so the pipe releases, and both the pipe and the sillcock can be reused. If you are a property manager stocking for repeat service calls, order a clip in the matching 1/2-inch size at the same time.
4) Can I use this to replace a soldered hose bib without cutting open the wall and torching?
That is the main case for it. Cut the old sillcock off the supply line, clean and deburr the pipe end, and push the 24629LF on. No torch, no flux, no solvent cement, and no fire watch, which matters in occupied multi-family units and finished walls where open flame is not an option. The inlet accepts copper, PEX, CPVC, or PE-RT, so you are not limited by what the original line was run in.
5) What hose thread does the outlet use - will a standard garden hose thread onto it?
Yes. The outlet is 3/4-inch male garden hose thread, which is the standard GHT size on residential and commercial hoses, splitters, and vacuum breakers in North America.
6) Can I rotate the sillcock after I push it on to get the handle straight?
Yes. The push-to-connect fitting can be rotated on the pipe after it is seated, so you can line the handle and the hose outlet up square to the wall without pulling the joint apart. That is the practical advantage over a soldered sillcock, where alignment is fixed once the joint cools.
7) Do I need to add a vacuum breaker to this sillcock?
The 24629LF is specified as a 1/2-inch push-to-connect by 3/4-inch male hose thread frost-free sillcock with a multi-turn handle. Many jurisdictions require backflow protection at an exterior hose connection, so plan on threading a hose-thread vacuum breaker onto the 3/4-inch GHT outlet if your local code calls for one. The outlet is standard garden hose thread, so an off-the-shelf breaker threads straight on.
8) Is this a quarter-turn or multi-turn hose bib?
Multi-turn. The 24629LF uses a multi-turn handle, so you throttle flow gradually rather than snapping it open like a ball-valve bib. On a frost-free sillcock that is the usual arrangement, and it lets you feather flow for washdown or irrigation work.
9) How does the SharkBite 24629LF ship - single unit or multi-pack?
It is packaged 4 each, so it suits contractors and MRO buyers doing several openings at once rather than a one-off repair. Model number to order against is 24629LF.
How fast can I get the SharkBite 24629LF delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SharkBite 24629LF come with a warranty?
Absolutely. The SharkBite 24629LF is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SharkBite 24629LF?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SharkBite 24629LF from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!