SharkBite 2462 Series Push-to-...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$13.33
SharkBite 2462 Series Push-to-Connect Hose Bibb, 1/2-in x 3/4-in MHT

SharkBite 2462 Series Push-to-Connect Hose Bibb, 1/2-in x 3/4-in MHT

(No reviews yet) Write a Review

Model: 24626LF

In Stock (leaves warehouse same day if ordered before 3pm ET)

$13.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SharkBite 2462 Series Push-to-Connect Hose Bibb, 1/2-in x 3/4-in MHT

The SharkBite 2462 Series is a family of push-to-connect hose bibbs engineered to install or replace an exterior hose bib without soldering, clamps, unions, or glue. The 2462 Series is available across two models, 24626LF and 24627LF, sharing a common 1/2-in push-to-connect inlet and a 3/4-in male garden hose thread (MHT) outlet set at a 90 degree angle. The inlet accepts 1/2-in PEX, copper, CPVC, or PE-RT pipe in any combination, and a multi-turn handle delivers precise on/off flow control right at the fixture. This makes the 2462 Series a practical rough-in solution for exterior hose bib runs, utility connections, and mixed-material plumbing retrofits.

Key Features

  • Trade Size: 1/2-in push-to-connect inlet x 3/4-in male garden hose thread outlet, shared across both 2462 Series models, for standard hose bib replacement.
  • Push-to-Connect Design: Insert the pipe and stainless steel teeth grip it tight while an O-ring compresses to create a seal, eliminating solder, glue, unions, or specialty tools during installation.
  • Pipe Compatibility: Inlet works with PEX, copper, CPVC, or PE-RT pipe in any combination, giving installers flexibility on mixed-material jobs.
  • 90 Degree Configuration: Outlet is set at a 90 degree angle for common exterior hose bibb applications.
  • Multi-Turn Handle: Provides on/off flow control at the fixture.
  • Rotatable Fitting: The fitting can be rotated on the pipe after installation, making it easier to work in tight rough-in spaces.
  • Reusable Connection: A demount clip (sold separately) allows the pipe to be released from the fitting so the valve can be disconnected and reused.

Technical Specifications

  • Inlet Connection: 1/2-in push-to-connect
  • Outlet Connection: 3/4-in male garden hose thread (MHT)
  • Angle: 90 Degree
  • Series: 2462, available in models 24626LF and 24627LF
  • Packaging: 6 ea
  • Compatible Pipe Materials: PEX, Copper, CPVC, PE-RT

Typical Applications

  • Hose Bibb Installation and Replacement
  • Exterior Wall Hose Bib Rough-In
  • Residential and Commercial Plumbing Retrofit
  • Renovation and New Construction Projects Where Soldering Is Impractical
  • Mixed-Material Pipe Connections (PEX, Copper, CPVC, PE-RT)

Why SharkBite?

SharkBite's push-to-connect system uses stainless steel teeth and a compression O-ring to create a secure, reusable joint without heat, glue, or specialty tools, letting plumbers and contractors complete hose bibb replacements quickly across mixed pipe materials. The ability to rotate the fitting after installation and disconnect it with a demount clip makes the 2462 Series, spanning models 24626LF and 24627LF, a practical choice for tight rough-in spaces and future serviceability.

[{"name": "Product Type", "value": "Hose Bibb"}, {"name": "Trade Size", "value": "1/2-in x 3/4-in"}, {"name": "Connection Type", "value": "Push-to-Connect"}, {"name": "Angle", "value": "90°"}, {"name": "Configuration", "value": "MHT Outlet"}, {"name": "Series", "value": "2462"}]

Manufacturer Resources

Product Specs

list_batch:
SHK-20260923
Product Type:
Hose Bibb
Connection Type:
Push-Fit
Angle:
90°
Series:
2462
Department:
Plumbing
Product Subgroup:
Fittings and Valves
Product Size:
1/2-in x 3/4-in
Product Group:
Fitting

SharkBite 24626LF – Frequently Asked Questions

1) Can I replace an outdoor hose bib with the SharkBite 2462 without soldering?
That's exactly what the 2462 Series push-to-connect hose bibb is for. The inlet is a push-fit connection, so you cut the pipe, push the fitting on, and the stainless steel teeth grip while the O-ring seals. No torch, no solder, no glue, no unions, and no clamps. It works for exterior wall hose bib rough-in on new construction as well as straight replacement of an existing bib.
2) What pipe materials does the SharkBite 2462 hose bibb connect to?
The push-to-connect inlet accepts PEX, copper, CPVC, or PE-RT, and it will take them in any combination. That is the reason it gets used on retrofit work where someone has run PEX off an older copper or CPVC system and does not want to build a transition joint at the wall.
3) Will a standard garden hose thread onto the SharkBite 2462 hose bibb?
Yes. The outlet is 3/4-inch male garden hose thread (MHT), which is the standard thread any garden hose, splitter, or hose timer screws onto. No adapter needed.
4) Why is the SharkBite 2462 hose bibb a 90 degree body instead of straight?
The outlet sits at 90 degrees to the inlet, so the supply line can come at the wall from behind or from the side and the hose connection still ends up pointing out and down the way you want it at the exterior face. That is the usual geometry for a through-wall hose bib. If your supply approaches the bib in line with where the hose has to point, a straight-pattern valve is the better choice.
5) Can I rotate or reposition the SharkBite 2462 after I push it on?
Yes, the fitting rotates on the pipe once it is connected, which is how you aim the outlet after the joint is already made. That matters in a tight stud bay where you cannot spin the pipe itself. The joint is also demountable with a SharkBite demount clip, sold separately, so the valve can be released and reused rather than cut out.
6) What are the two model numbers in the SharkBite 2462 hose bibb series?
The series is sold as 24626LF and 24627LF. Both carry the 3/4-inch male garden hose thread outlet at 90 degrees; what you select between them is the push-to-connect inlet size. Order by the model number so the inlet matches the supply pipe you are tying into.
7) Is the SharkBite 2462 a sensible choice for a property manager stocking hose bib replacements across multiple buildings?
It is a reasonable standardization part for that work. One valve covers PEX, copper, CPVC, and PE-RT supply lines, so a maintenance tech does not need to know which material is behind the wall before heading out, and no torch means no hot work permit and no fire watch in an occupied building. It is packaged 6 each, which suits stocking a truck or a shop shelf.
8) Do I need any special tools to install the SharkBite 2462 hose bibb?
No specialty tools for the connection itself. You cut the pipe square, deburr it, and push the valve on. The only accessory worth having is a SharkBite demount clip if you expect to take the joint apart later, and that is sold separately rather than packed with the valve.
9) Does the SharkBite 2462 hose bibb have a quarter-turn or multi-turn handle?
Multi-turn. You get gradual on/off flow control at the fixture rather than the snap open or shut of a ball valve, which is what most people want on a hose connection when they are throttling a sprinkler or a wash line.
How fast can I get the SharkBite 24626LF delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SharkBite 24626LF come with a warranty?
Absolutely. The SharkBite 24626LF is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SharkBite 24626LF?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SharkBite 24626LF from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!