SharkBite U2276LF 1/4" x 3/4" ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$13.99
SharkBite U2276LF 1/4" x 3/4" Push-to-Connect Garden Hose Dishwasher Elbow

SharkBite U2276LF 1/4" x 3/4" Push-to-Connect Garden Hose Dishwasher Elbow

(No reviews yet) Write a Review

Model: U2276LF

In Stock (leaves warehouse same day if ordered before 3pm ET)

$13.99
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SharkBite U2276LF 1/4" x 3/4" Push-to-Connect Garden Hose Dishwasher Elbow

The SharkBite U2276LF is a 1/4 in. (3/8 in. OD) x 3/4 in. garden hose thread dishwasher elbow built on the SharkBite push-fit connection system, giving plumbers and contractors a fast, mechanical way to complete a dishwasher supply connection without soldering, clamps, unions or glue. The push-fit end accepts copper, CTS CPVC and PEX tubing interchangeably, while the 3/4 in. garden hose thread end lands directly at the dishwasher supply connection point. It is certified to 200 psi and 200 degrees F, so it is rated for the pressures and temperatures typically encountered in residential water distribution and appliance supply lines behind the wall or under the cabinet.

Key Features

  • Trade Size: 1/4 in. (3/8 in. OD) push-fit connection x 3/4 in. garden hose thread outlet for dishwasher supply hookups.
  • Push-to-Connect Design: No soldering, clamps, unions or glue required — simply push the tubing into the fitting for a secure, mechanical joint.
  • Multi-Material Compatibility: Fits copper, CPVC and PEX tubing in any combination, letting a single fitting bridge different pipe materials on the job.
  • Pressure and Temperature Rating: Certified to 200 psi and 200 degrees F for reliable performance on potable water supply lines.
  • Code Compliance: Meets UPC, IPC and Canadian plumbing code requirements.
  • Underground and Concealed Installation: Certified for underground applications and as a manufactured joint without the need for access panels.
  • Elbow Configuration: Garden hose dishwasher elbow shape simplifies routing in tight cabinet spaces behind the appliance.

Certifications & Compliance

  • Certified to 200 psi and 200 degrees F
  • Meets UPC, IPC and Canadian plumbing code requirements
  • Certified for underground applications and as a manufactured joint without access panels

Technical Specifications

  • Connection: 1/4 in. (3/8 in. OD) Push-to-Connect x 3/4 in. Garden Hose Thread
  • Pressure Rating: 200 psi
  • Temperature Rating: 200 degrees F
  • Compatible Tubing: Copper, CPVC, PEX
  • Packaging: 6 ea

Typical Applications

  • Dishwasher Water Supply Connections
  • Residential and Commercial Rough-In Plumbing
  • Mixed-Material Pipe Transitions (Copper, CPVC, PEX)
  • Concealed Manufactured Joint Installations Without Access Panels
  • Underground Water Distribution Applications
  • Renovation and New Construction Appliance Hookups

Why SharkBite?

SharkBite's push-fit connection system is engineered for speed and reliability, allowing plumbers to join copper, CTS CPVC and PEX pipe in any combination without soldering, clamps, unions or glue. With a 200 psi / 200 degrees F rating, UPC and IPC code compliance, and certification for underground and concealed manufactured-joint use, the U2276LF gives contractors a dependable, code-compliant way to complete dishwasher supply connections quickly on the job.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
SHK-20260923
Product Type:
Dishwasher Elbow
Connection Type:
Push-to-Connect
Configuration:
Elbow
Standards:
UPC
Department:
Plumbing
Product Subgroup:
Fittings and Valves
Product Size:
1/4" x 3/4"
Product Group:
Fitting

SharkBite U2276LF – Frequently Asked Questions

1) What size tubing does the SharkBite U2276LF dishwasher elbow connect to?
The U2276LF takes 1/4 in. nominal tubing, which is 3/8 in. OD, on the push-fit side and ends in a 3/4 in. garden hose thread outlet for the dishwasher supply. That 3/8 in. OD figure is the one to measure against your stub-out, since 1/4 in. in this size convention refers to the nominal size, not the outside diameter.
2) Can I use this SharkBite dishwasher elbow on PEX, or is it copper only?
Copper, CTS CPVC and PEX all work, in any combination. One fitting bridges materials, so a copper stub-out feeding a PEX repipe needs no adapter. Push the tubing in and the joint is made mechanically, with no solder, clamps, unions or glue.
3) Can this fitting be installed behind the cabinet or in a wall without an access panel?
Yes. The U2276LF is certified as a manufactured joint, so it may be concealed without an access panel, and it is also certified for underground applications. That matters for appliance hookups buried behind a dishwasher where nobody wants to cut a panel into the cabinet back.
4) Will a push-fit dishwasher elbow hold up on a hot water supply line?
Rated to 200 psi and 200 degrees F, which covers residential hot and cold potable supply and appliance feeds. Dishwasher supply lines run well under that on both counts.
5) Does the SharkBite U2276LF meet plumbing code for an inspected job?
It meets UPC and IPC requirements as well as Canadian plumbing code, which is what an inspector on a residential or commercial rough-in will be checking against.
6) Do I need special tools to install this dishwasher elbow?
No torch, crimp ring or glue. The push-fit end makes up by hand on properly cut and deburred tubing, which is why maintenance crews and property managers use these for an appliance swap without pulling a soldering setup under a cabinet.
7) Is the SharkBite U2276LF sold singly or by the box?
Packaging is 6 each, so plan on a six-pack rather than a single fitting if you are picking up one dishwasher job. The ordering part number is U2276LF.
How fast can I get the SharkBite U2276LF delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SharkBite U2276LF come with a warranty?
Absolutely. The SharkBite U2276LF is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SharkBite U2276LF?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SharkBite U2276LF from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!