SharkBite UR256 3/4" Push-to-C...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$11.49
SharkBite UR256 3/4" Push-to-Connect Elbow Fitting, Lead-Free Brass

SharkBite UR256 3/4" Push-to-Connect Elbow Fitting, Lead-Free Brass

(No reviews yet) Write a Review

Model: UR256

In Stock (leaves warehouse same day if ordered before 3pm ET)

$11.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SharkBite UR256 3/4" Push-to-Connect Elbow Fitting

The SharkBite UR256 is a 3/4" 90° push-to-connect elbow fitting built for fast, tool-free rough-in plumbing connections. Machined from lead-free brass, this fitting lets a plumber or contractor make a full-flow 90° turn on 3/4" tubing without soldering, clamping, or gluing — just cut the pipe square, deburr, mark the insertion depth, and push. It's designed to work behind the wall or under the floor on copper, CPVC, or PEX tubing, making it a versatile go-to elbow for repairs, remodels, and new construction where a quick, reliable connection is needed under time pressure.

Key Features

  • Trade Size: 3/4" connection size on each end, sized for standard copper, CPVC, or PEX tubing runs.
  • 90° Elbow Configuration: Makes a clean directional turn in tight rough-in spaces without the need for a torch or solvent cement.
  • Push-to-Connect Design: Push-fit connection allows installation with no soldering, clamps, unions, or special crimping tools required.
  • Durable Construction: Lead-free brass body resists corrosion and holds up to repeated rough-in handling on the jobsite.
  • Tool-Free Installation: Speeds up rough-in labor on repair and remodel jobs by eliminating flame work and drying time.
  • Multi-Material Compatible: Designed to connect to copper, CPVC, and PEX tubing on the same fitting body, simplifying transitions between pipe types.

Technical Specifications

  • Trade Size: 3/4"
  • Configuration: 90° Elbow
  • Connection Type: Push-to-Connect
  • Material: Lead-Free Brass
  • Refer to manufacturer documentation for additional technical specifications.

Typical Applications

  • Residential and Commercial Rough-In Plumbing
  • Emergency Pipe Repairs Requiring a Fast, Tool-Free Fix
  • Directional Changes on Copper, CPVC, or PEX Runs
  • Renovation and Remodel Projects Behind Walls or Under Floors
  • New Construction Water Supply Rough-In

Why SharkBite?

SharkBite push-to-connect fittings are engineered for plumbers and contractors who need a dependable, repeatable connection without waiting on solder joints to cool or solvent cement to cure. The lead-free brass body of the UR256 elbow is built to handle the rigors of rough-in work, and its push-fit connection helps crews move faster on repair calls, remodels, and new installs alike. Choose SharkBite for rough-in fittings that prioritize install speed and jobsite reliability.

Manufacturer Resources

Product Specs

list_batch:
SHK-20260923
Product Type:
Elbow
Connection Type:
Push-to-Connect
Angle:
90°
Standards:
No-Lead
Department:
Plumbing
Product Subgroup:
Fittings and Valves
Product Material:
Brass
Product Size:
3/4"
Product Group:
Fitting

SharkBite UR256 – Frequently Asked Questions

1) Will the SharkBite UR256 elbow connect copper to PEX, or does it only work with one pipe type?
One fitting handles all three. The UR256 is a 3/4 inch push-to-connect 90 degree elbow that accepts copper, CPVC, or PEX tubing on either end, so you can turn a corner and change pipe material in the same joint. That's the usual reason a repair crew reaches for it mid-run instead of adding a separate transition coupling.
2) Do I need a crimp tool or torch to install the UR256 push-fit elbow?
No tools for the connection itself. The UR256 is a push-to-connect fitting: cut the pipe square, deburr it, mark your insertion depth, and push the tubing into the fitting. No solder, no flame, no solvent cement, no clamp rings or crimp jaws. On a repair call that means no dry time before you can pressure the line.
3) Is the SharkBite UR256 elbow safe for potable water lines?
The UR256 body is machined from lead-free brass and carries a no-lead designation, which is what potable water supply work calls for. It is sold as a plumbing supply fitting for residential and commercial water rough-in.
4) Can a push-to-connect elbow like the UR256 be used behind a wall or under a floor?
Yes. The UR256 elbow is intended for rough-in work behind walls and under floors, including new construction water supply rough-in, remodels, and emergency repairs. Local code still governs whether a concealed joint is acceptable in your jurisdiction, so check with your inspector on access requirements.
5) What size pipe does the SharkBite UR256 take on each end?
Both ends are 3/4 inch. It is a same-size 90 degree elbow, not a reducing fitting, so it joins 3/4 inch tubing to 3/4 inch tubing. If you need to step down in the turn you want a reducing elbow instead.
6) Why choose a push-fit elbow over a soldered copper 90 for a maintenance repair?
Water and heat are the deciding factors. A soldered 90 needs the line fully drained and dry plus a torch, which is a problem in an occupied unit or a tight joist bay with combustibles nearby. The UR256 push-to-connect elbow makes the same 3/4 inch directional turn with no flame and no cure time, so a property maintenance tech can cut, deburr, push, and repressurize. For permanent new-construction copper runs where a crew is already sweating joints, soldered fittings remain the cheaper per-joint option.
7) Do I have to deburr CPVC and copper before pushing the UR256 on?
Yes, and skipping it is the most common cause of a weeping push-fit joint. The install sequence for the UR256 is cut the pipe square, deburr the end, mark your insertion depth, then push fully home. A burr or a ragged angled cut can score the O-ring as the tube passes it.
How fast can I get the SharkBite UR256 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SharkBite UR256 come with a warranty?
Absolutely. The SharkBite UR256 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SharkBite UR256?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SharkBite UR256 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!