Shop All SharkBite

SharkBite 23036-0000LF 1/2" x 1/4" Compression Angle Stop, Chrome-PlatedThe SharkBite 23036-0000LF is a 1/2" x 1/4" compression angle stop built for rough-in supply connections behind fixtures such...

SharkBite 24438 3/4-in Push-to-Connect Pressure-Gauge Tee, BrassThe SharkBite 24438 is a 3/4-in push-to-connect pressure-gauge tee designed for fast, tool-free rough-in connections on PEX, copper,...

SharkBite 24615-0000LF 1/2" Push-to-Connect Ball Valve with Drop Ear, DZR BrassThe SharkBite 24615-0000LF is a 1/2" push-to-connect ball valve with a drop ear configuration, built for fast shut-off...

SharkBite 2462 Series Push-to-Connect Hose Bibb, 1/2-in x 3/4-in MHTThe SharkBite 2462 Series is a family of push-to-connect hose bibbs engineered to install or replace an exterior hose bib without...

SharkBite 24622LF Garden Valve, 1/2-in x 3/4-in MHTThe SharkBite 24622LF Garden Valve gives plumbers and contractors a straightforward way to add a hose-bibb style shutoff point to a rough-in run,...

SharkBite 24623LF Push-to-Connect Garden Valve, 3/4-in MHTThe SharkBite 24623LF is a 3/4-in push-to-connect x 3/4-in male garden hose thread (MHT) garden valve built for rough-in and retrofit...

SharkBite 24629LF Frost Free Sillcock, 1/2-in PTC x 3/4-in Hose Thread, 10-inThe SharkBite 24629LF is a 10-in frost-free sillcock built for installing a new outdoor hose bib or replacing an existing...

SharkBite 2463 Series Hose Bibb, 1/2" x 3/4" MHT Multi-Turn 45° Push-to-ConnectThe SharkBite 2463 Series Hose Bibb is a 1/2" x 3/4" MHT multi-turn shutoff valve set at a 45° angle, built for both new...

SharkBite 246322 1/2-in Push-to-Connect Stop and Waste Valve with Drain, Forged BrassThe SharkBite 2463 Series is a 1/2-in push-to-connect x 1/2-in push-to-connect stop and waste valve with an...

SharkBite 24636LF Frostfree Sillcock, 1/2-in x 3/4-in MHT x 12-inThe SharkBite 24636LF is a frostfree sillcock designed for outdoor hose bibb rough-in where freeze protection is a priority. Sized...

SharkBite 24687 1/2" Straight Stop x Click Seal® Faucet Connector, 30"The SharkBite 24687 is a one-piece supply stop and faucet connector assembly built for fast rough-in and repair work under sinks...

SharkBite 25024 Push-to-Connect Ice Maker Install KitThe SharkBite 25024 Ice Maker Install Kit gives a plumber or contractor everything needed to run a water supply line to a refrigerator ice maker...

SharkBite 2556 Push-Fit Water Filter KitThe SharkBite 2556 Water Filter Kit is a rough-in accessory designed to give plumbers and contractors a fast, tool-minimal way to add a whole-house style...

SharkBite 25568 Dishwasher Installation Kit with Push-to-Connect PEX FittingsThe SharkBite 25568 Dishwasher Installation Kit gives plumbers and contractors everything needed to rough-in and connect a...

SharkBite HG110-D 1/2" Thermostatic Mixing ValveThe SharkBite HG110-D is a 1/2" thermostatic mixing valve designed for use in rough-in plumbing systems where hot and cold water lines need to be...

SharkBite Lead-Free Push-to-Connect End Stop FittingThe SharkBite End Stop is a push-to-connect fitting built to cap off copper, CPVC, or PEX tubing in any combination without soldering, clamps,...

SharkBite SB Plumbing Pipe End Cap FittingThe SharkBite SB End Cap is a rough-in plumbing fitting designed to terminate and seal off the end of a pipe run behind the wall or under the floor. This...

SharkBite SB0454 2" Push-Fit End Cap, No-LeadThe SharkBite SB0454 is a 2" push-fit end cap used to close off and terminate a run of pipe without soldering, solvent welding, or threading. Built for...

SharkBite SBBV54 Ball Valve for Rough-In Shutoff ApplicationsThe SharkBite SBBV54 is a ball valve engineered for use as a shutoff point within a rough-in plumbing system, available in sizes from...

SharkBite U004LF Coupling, 1/4-in (3/8-in OD)The SharkBite U004LF is a 1/4-in (3/8-in OD) coupling built for straight, in-line tubing-to-tubing connections in rough-in plumbing work. This fitting is...

SharkBite U006LF Push-to-Connect Coupling, 3/8" (1/2" OD) Lead-FreeThe SharkBite U006LF is a 3/8" (1/2" OD) x 3/8" (1/2" OD) push-to-connect coupling built for rough-in plumbers who need a fast,...

SharkBite U008LF Push-Fit Coupling, Lead-Free Multi-MaterialThe SharkBite U008LF is a push-fit coupling built for rough-in plumbers who need a fast, reliable way to join pipe without soldering,...

SharkBite U009LF Push-Fit Reducer Coupling, 3/8" x 1/2", Lead-FreeThe SharkBite U009LF is a 3/8" x 1/2" push-fit reducer coupling built for rough-in plumbers who need a fast, solder-free transition...

SharkBite U016LF 3/4" Push-Fit Straight Coupling, DZR BrassThe SharkBite U016LF is a 3/4" push-fit straight coupling built for rough-in plumbers who need a fast, mechanical joint without a torch,...