SharkBite 23036-0000LF 1/2" x ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$15.67
SharkBite 23036-0000LF 1/2" x 1/4" Compression Angle Stop, Chrome-Plated

SharkBite 23036-0000LF 1/2" x 1/4" Compression Angle Stop, Chrome-Plated

(No reviews yet) Write a Review

Model: 23036-0000LF

In Stock (leaves warehouse same day if ordered before 3pm ET)

$15.67
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SharkBite 23036-0000LF 1/2" x 1/4" Compression Angle Stop, Chrome-Plated

The SharkBite 23036-0000LF is a 1/2" x 1/4" compression angle stop built for rough-in supply connections behind fixtures such as toilets, sinks and faucets. This chrome-plated stop uses a compression connection on both ends, letting a plumber isolate a fixture supply without soldering, clamps, unions or glue. It is certified to 200 psi and 200 degrees F and meets UPC, IPC and Canadian plumbing code requirements, making it suitable for professional rough-in and repair work on copper, CPVC and PEX tubing.

Key Features

  • Trade Size: 1/2" inlet x 1/4" outlet for standard fixture supply rough-in.
  • Connection Type: Compression fitting on both ends — no soldering, clamps, unions or glue required for installation.
  • Tubing Compatibility: Fits copper, CTS CPVC and PEX tubing in any combination, simplifying stock for mixed-material jobs.
  • Pressure and Temperature Rating: Certified to 200 psi and 200 degrees F for reliable supply-line performance.
  • Finish: Chrome-plated body for a clean, corrosion-resistant appearance at the fixture stop.
  • Certified Applications: Certified for underground applications and as a manufactured joint without access panels.

Certifications & Compliance

  • Meets UPC Plumbing Code Requirements
  • Meets IPC Plumbing Code Requirements
  • Meets Canadian Plumbing Code Requirements
  • Certified for Underground Applications
  • Certified as a Manufactured Joint Without Access Panels

Technical Specifications

  • Inlet Size: 1/2"
  • Outlet Size: 1/4"
  • Connection: Compression
  • Finish: Chrome Plated
  • Pressure Rating: 200 psi
  • Temperature Rating: 200 degrees F
  • Packaging: 12 ea

Typical Applications

  • Toilet and Faucet Fixture Supply Stops
  • Residential and Commercial Rough-In Plumbing
  • Underground Water Distribution Repairs
  • Copper, CPVC and PEX Pipe Connections
  • Renovation and New Construction Supply Lines

Why SharkBite?

SharkBite's push-fit and compression connection systems let plumbers join copper, CTS CPVC and PEX pipe in any combination without soldering, clamps, unions or glue, speeding up rough-in and repair work. The 23036-0000LF angle stop is certified to 200 psi and 200 degrees F, certified for underground applications and as a manufactured joint without access panels, and meets UPC, IPC and Canadian plumbing code requirements — giving contractors a dependable, code-compliant chrome-plated stop for fixture supply connections.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
SHK-20260923
Product Type:
Angle Stop
Connection Type:
Compression
Product Finish:
Chrome-Plated
Standards:
UPC, IPC
Department:
Plumbing
Product Subgroup:
Fittings and Valves
Product Size:
1/2" x 1/4"
Product Group:
Fitting

SharkBite 23036-0000LF – Frequently Asked Questions

1) Will the SharkBite 23036-0000LF angle stop work on 1/2 inch copper, CPVC and PEX supply lines?
Yes. The 23036-0000LF uses a compression connection on the 1/2 inch inlet, and SharkBite rates that connection for copper, CTS CPVC and PEX tubing in any combination. That is the reason to stock it on mixed-material jobs: one stop covers a copper riser in an older building and a PEX stub-out in a renovated unit without carrying two part numbers.
2) What size outlet does the 23036-0000LF have, and will a toilet supply line fit it?
The outlet is 1/4 inch compression, with a 1/2 inch compression inlet. A 1/4 inch outlet is the size used for refrigerator and ice maker lines and small faucet feeds. Standard toilet and lavatory faucet risers in North America are 3/8 inch compression, so they will not thread onto this stop. If you are feeding a toilet or a faucet, order the 1/2 x 3/8 version of the angle stop instead.
3) Does this angle stop meet UPC and IPC plumbing code for a commercial job?
The 23036-0000LF meets UPC, IPC and Canadian plumbing code requirements. It is also certified for underground applications and as a manufactured joint without an access panel, which is the clause that matters if an inspector is asking whether the connection has to remain accessible.
4) Do I need to solder or crimp to install a SharkBite compression angle stop?
No. Both ends are compression, so the stop goes on with a nut and ferrule and a wrench. No torch, no crimp rings, no clamps, no unions, no solvent glue. That matters on occupied-unit repairs where an open flame behind a vanity is a problem, and it means the stop can be installed on a wet or recently drained line.
5) What pressure and temperature is the SharkBite 23036-0000LF angle stop rated for?
Certified to 200 psi and 200 degrees F. That covers both cold and domestic hot water supply runs behind fixtures, so the same stop can be used on the hot and cold side of a lavatory pair.
6) How does a compression angle stop compare to a push-to-connect stop for a fixture rough-in?
Both get you off the torch. The push-fit version seats on the tube by hand and is quicker in a tight cabinet; the compression end on the 23036-0000LF is tightened with a wrench and is the connection most inspectors and property maintenance crews are already used to seeing at a fixture stop. Either way, the tubing compatibility is the same across copper, CTS CPVC and PEX.
7) Can this SharkBite stop be buried or used on an underground water line repair?
Yes, the 23036-0000LF is certified for underground applications. Combined with the manufactured-joint certification, the connection does not require an access panel, so it can be used on buried water distribution repairs rather than only at an exposed fixture.
8) Is the SharkBite 23036-0000LF sold individually or in a box?
Packaging is 12 each, so it comes as a case quantity rather than a single piece. That suits multi-family and MRO stocking where a crew is replacing stops across a run of units.
9) What is the finish on this angle stop, and will it look right on an exposed wall under a sink?
Chrome-plated body, which is the standard exposed finish for a fixture stop under a lavatory or behind a toilet. It also gives corrosion resistance at the valve where condensation and cleaning chemicals hit it.
10) What is the manufacturer part number for this 1/2 x 1/4 SharkBite chrome angle stop?
The part number is 23036-0000LF. The LF suffix marks it as the lead-free body, which is what you want to specify for potable water supply work.
How fast can I get the SharkBite 23036-0000LF delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SharkBite 23036-0000LF come with a warranty?
Absolutely. The SharkBite 23036-0000LF is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SharkBite 23036-0000LF?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SharkBite 23036-0000LF from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!