SharkBite 25024 Push-to-Connec...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$48.13
SharkBite 25024 Push-to-Connect Ice Maker Install Kit, Lead-Free Brass

SharkBite 25024 Push-to-Connect Ice Maker Install Kit, Lead-Free Brass

(No reviews yet) Write a Review

Model: 25024

In Stock (leaves warehouse same day if ordered before 3pm ET)

$48.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SharkBite 25024 Push-to-Connect Ice Maker Install Kit

The SharkBite 25024 Ice Maker Install Kit gives a plumber or contractor everything needed to run a water supply line to a refrigerator ice maker in one box. The kit is built around SharkBite's push-to-connect design and includes a 1/2-in service slip tee, a 1/2-in x 1/4-in (3/8-in O.D.) push-to-connect angle stop valve, a 10-ft coil of 1/4-in PEX pipe, a 1/4-in (3/8-in O.D.) SharkBite x 1/4-in O.D. compression connector, and 1/2-in and 1/4-in disconnect clips. All fittings are lead-free DZR brass and are rated for use with existing copper or CPVC supply lines, making this a straightforward rough-in solution for adding an ice maker branch line without soldering, gluing, or specialty tools.

Key Features

  • Trade Size: 1/2-in service slip tee and 1/2-in x 1/4-in (3/8-in O.D.) angle stop valve for tying into a standard 1/2-in supply line.
  • Durable Construction: Lead-free DZR brass fittings throughout the kit for corrosion resistance on the water supply branch.
  • Push-to-Connect Connection: Stainless steel teeth and an O-ring seal grip and seal onto copper or CPVC pipe with no solder, glue, unions, or tools required.
  • Removable Slip Tee: Allows removal of up to 2-in of existing copper or CPVC line to add the angle supply stop valve.
  • Reusable Fittings: Disconnect clips let you remove the pipe from the fitting for fast disassembly so fittings and valves can be changed and reused.
  • Rotatable After Assembly: Fittings can be rotated once installed for easier positioning in tight spaces behind appliances or walls.
  • 10-ft PEX Coil Included: 1/4-in PEX pipe connects the angle stop valve outlet to the 1/4-in ice maker connector, and can be cut to the exact length needed for a clean, tangle-free run.
  • Threaded Ice Maker Connector: 1/4-in (3/8-in O.D.) SharkBite x 1/4-in O.D. compression connector threads directly onto the ice maker.

Technical Specifications

  • Service Slip Tee Size: 1/2-in
  • Angle Stop Valve Size: 1/2-in x 1/4-in (3/8-in O.D.)
  • PEX Coil: 10-ft length, 1/4-in
  • Compression Connector: 1/4-in (3/8-in O.D.) SharkBite x 1/4-in O.D.
  • Material: Lead-free DZR brass fittings
  • Compatible Pipe: Copper or CPVC
  • Packaging: 3 ea

Typical Applications

  • Adding a Refrigerator or Ice Maker Water Supply Branch
  • Residential Rough-In and Retrofit Plumbing
  • Tying Into Existing Copper or CPVC Supply Lines
  • Tight-Space Installations Behind Appliances
  • Renovation and Remodel Water Line Additions

Why SharkBite?

SharkBite's push-to-connect fittings use lead-free DZR brass construction with a stainless steel grip ring and O-ring seal that install without solder, glue, or specialty tools, and can be disassembled and reused with the included disconnect clips. This makes the 25024 kit a practical, code-conscious choice for plumbers and contractors adding an ice maker supply line quickly and cleanly.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
SHK-20260923
Product Type:
Ice Maker Outlet Kit
Connection Type:
Push-to-Connect
Standards:
No-Lead
Department:
Plumbing
Product Subgroup:
Parts & Accessories
Product Material:
Brass
Product Size:
1/2" x 1/4"
Product Group:
Fitting

SharkBite 25024 – Frequently Asked Questions

1) What's included in the SharkBite 25024 ice maker install kit?
Everything needed to branch a refrigerator water line off an existing supply: a 1/2 inch service slip tee, a 1/2 inch x 1/4 inch (3/8 inch O.D.) push-to-connect angle stop valve, a 10 ft coil of 1/4 inch PEX, a 1/4 inch (3/8 inch O.D.) SharkBite x 1/4 inch O.D. compression connector that threads onto the ice maker, and 1/2 inch and 1/4 inch disconnect clips. No solder, glue, or unions needed.
2) Can I use the SharkBite 25024 kit on CPVC supply line, or is it copper only?
Both. The push-to-connect fittings in the 25024 kit grip and seal on either copper or CPVC supply pipe using a stainless steel tooth ring and an O-ring. The tie-in point is a 1/2 inch line either way.
3) How much copper do I have to cut out to install the SharkBite slip tee?
The service slip tee is removable and slides on the pipe, so it lets you take out up to 2 inches of existing copper or CPVC to drop in the tee and angle supply stop. That is the whole point of a slip tee: you do not need the pipe to spread apart to get the fitting in.
4) Will the outlet side of this kit connect to a standard refrigerator ice maker line?
Yes. The kit's connector is a 1/4 inch (3/8 inch O.D.) SharkBite x 1/4 inch O.D. compression fitting that threads directly onto the ice maker inlet, and the 10 ft coil of 1/4 inch PEX runs from the angle stop to that connector. Cut the PEX to the length your run needs.
5) Is the SharkBite 25024 kit lead-free for potable water?
The fittings are lead-free DZR brass throughout, and the kit carries a No-Lead designation. DZR (dezincification resistant) brass also holds up better on branch lines in aggressive water.
6) Do I need special tools to install this ice maker kit?
No torch, no cement, no crimp tool. The connections are push-to-connect: deburr and mark the pipe, push the fitting home. Removal takes the included disconnect clips, which let you pull the pipe back out so the valve or fitting can be repositioned or reused.
7) I'm installing behind a refrigerator with almost no clearance. Can the fittings be adjusted after they're pushed on?
They can. SharkBite push-to-connect fittings rotate after assembly, so you can aim the angle stop outlet and the tee branch where you need them once the pipe is seated, which matters in a tight wall cavity or behind an appliance.
How fast can I get the SharkBite 25024 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SharkBite 25024 come with a warranty?
Absolutely. The SharkBite 25024 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SharkBite 25024?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SharkBite 25024 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!