SharkBite 2463 Hose Bibb, 1/2"...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$16.67
SharkBite 2463 Hose Bibb, 1/2" x 3/4" MHT Multi-Turn 45" Push-to-Connect

SharkBite 2463 Hose Bibb, 1/2" x 3/4" MHT Multi-Turn 45" Push-to-Connect

(No reviews yet) Write a Review

Model: 24632LF

In Stock (leaves warehouse same day if ordered before 3pm ET)

$16.67
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SharkBite 2463 Series Hose Bibb, 1/2" x 3/4" MHT Multi-Turn 45° Push-to-Connect

The SharkBite 2463 Series Hose Bibb is a 1/2" x 3/4" MHT multi-turn shutoff valve set at a 45° angle, built for both new construction rough-in and replacement work on existing plumbing lines. The 2463 Series is available in two lead-free models, the 24632LF and 24633LF, sharing the same 1/2" x 3/4" MHT connection, 45° body configuration and push-to-connect inlet. The push-to-connect inlet accepts PEX, copper, CPVC, PE-RT and HDPE pipe directly, so a plumber can land the connection without crimping, gluing, soldering or any special installation tools. The multi-turn handle regulates water flow to the 3/4" MHT outlet, giving a controllable shutoff point for an exterior hose connection or utility spigot behind the wall or through the sill.

Key Features

  • Trade Size: 1/2" x 3/4" MHT connection sized for standard hose bibb rough-in applications.
  • 45° Configuration: Angled body simplifies routing through a wall or sill plate compared to a straight run.
  • Multi-Turn Shutoff: Handle allows regulation of water flow rather than a simple open/closed quarter-turn stop.
  • Push-to-Connect Inlet: No special tools, crimping, glue or soldering required for installation.
  • Broad Pipe Compatibility: Works directly with PEX, copper, CPVC, PE-RT and HDPE pipe, giving flexibility when tying into existing lines of mixed materials.
  • Application Range: Suited for both replacement of an existing hose bibb and new construction installations.
  • Model Options: Offered as the 24632LF and 24633LF, both built to the same 1/2" x 3/4" MHT, 45° multi-turn push-to-connect specification.

Technical Specifications

  • Trade Size: 1/2" x 3/4" MHT
  • Angle: 45°
  • Configuration: Multi-Turn
  • Connection Type: Push-to-Connect
  • Models: 24632LF, 24633LF
  • Packaging: 6 ea per pack

Typical Applications

  • Exterior Hose Bibb Replacement on Existing Copper or PEX Lines
  • New Construction Rough-In for Outdoor Spigots
  • Utility Sink or Garage Hose Connections
  • Retrofit Work Mixing PEX, Copper, CPVC, PE-RT or HDPE Piping

Why SharkBite?

SharkBite's push-to-connect design lets a plumber complete a hose bibb installation or replacement without soldering, crimping or gluing, cutting install time on both new construction and retrofit jobs. The 2463 Series' multi-turn control and 45° body configuration give installers a practical option for routing an exterior hose connection through a wall while maintaining compatibility across PEX, copper, CPVC, PE-RT and HDPE pipe already in the field. Whether selecting the 24632LF or 24633LF, contractors get a consistent 1/2" x 3/4" MHT multi-turn shutoff built for repeatable, tool-free rough-in and replacement work.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
SHK-20260923
Product Type:
Hose Bibb
Angle:
45°
Configuration:
Multi-Turn
Connection Type:
Push-to-Connect
Series:
2463
Department:
Plumbing
Product Subgroup:
Fittings and Valves
Product Size:
1/2" x 3/4" MHT
Product Group:
Fitting

SharkBite 24632LF – Frequently Asked Questions

1) Can I install a SharkBite 2463 hose bibb on copper without soldering?
Yes. The 2463 hose bibb has a push-to-connect inlet, so it seats directly onto copper with no torch, flux or solder. The same inlet accepts PEX, CPVC, PE-RT and HDPE, which is what makes it useful on a retrofit where the existing line material is not what you expected. No crimp tool, glue or special install tooling needed.
2) What is the difference between the SharkBite 24632LF and 24633LF?
Both are lead-free 45 degree multi-turn hose bibbs with a 3/4 inch MHT outlet. The difference is the push-to-connect inlet: the 24632LF takes a 1/2 inch inlet and the 24633LF takes a 3/4 inch inlet. Pick the one that matches the pipe you are tying into.
3) Will a standard garden hose thread onto this hose bibb?
Yes. The outlet is 3/4 inch MHT (male hose thread), which is the standard garden hose connection, so a hose or a hose-thread accessory threads straight on with a washer.
4) Can I use this to replace an existing outdoor spigot on a PEX line?
Yes, that is one of its intended uses. Cut the PEX back square, deburr nothing special, and push the fitting on. Because the push-to-connect inlet also takes copper, CPVC, PE-RT and HDPE, the same part covers a replacement where the branch line changes material inside the wall. Match the inlet size to the pipe: 1/2 inch is the 24632LF, 3/4 inch is the 24633LF.
5) Why choose a 45 degree hose bibb instead of a straight one?
The angled body makes routing through a wall or sill plate easier than a straight run, so the handle and spout sit at a workable angle off the exterior wall instead of projecting dead straight out of the penetration. On an outdoor spigot rough-in that usually means less fighting with the stud bay and the sill plate.
6) Is this a quarter-turn ball valve or a multi-turn hose bibb?
Multi-turn. The handle on the 2463 takes several turns and lets you throttle flow rather than snapping fully open or closed like a quarter-turn ball valve stop. If you want a hard on/off lever for a quick shutoff, a quarter-turn bibb is the better choice; if you want to regulate flow at the spigot, this is the one.
7) Is the SharkBite 2463 hose bibb lead-free for potable water lines?
Both models, the 24632LF and the 24633LF, are lead-free constructions. That is what the LF suffix on the part number denotes, and it is why these are used on potable supply rough-in and hose bibb replacement.
8) How many hose bibbs come in a pack?
The 2463 Series ships 6 each per pack, which suits a multi-family or new construction rough-in where you are setting a spigot on several units at once. Order the model matching your inlet size, 24632LF for 1/2 inch or 24633LF for 3/4 inch.
How fast can I get the SharkBite 24632LF delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SharkBite 24632LF come with a warranty?
Absolutely. The SharkBite 24632LF is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SharkBite 24632LF?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SharkBite 24632LF from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!