View All Ives

510BC LATITUDE WARDROBE HOOK, CONCEALED MOUNTDecorative design is ideal for all installations; Design complements Latitude Series pulls and levers; Concealed mount - packaged with set screw and allen wrench; Packaged with fasteners for wood/drywall...

FS1154 PLUNGER TYPE DOOR HOLDERPlunger and internal parts are plated steel and provides a 1-1/4" throw for all types of doors.Plunger is easily activated with minimal pressure, releasing instantly with a light tap on the platform lever.Round non-marring...

AS18 ANGLE STOPSurface applied stop for single and double doors;Includes SR64 door silencers to ensure quiet operation;SR64 silencers are replaceable;Units packed with wood and machine screws to meet most field conditions.IVES LATCHES, CATCHES AND BOLTS...

FB358 TOP OR BOTTOM BOLTSWhen the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the...

SB453 SURFACE BOLTSurface bolt has 1-3/16" throw for maximum security;Strong tension springs prevent creep;Ideal for all types of doors;Available 8" & 12" lengths;Units packed with standard wood screws and machine screws to meet most field...

Ives 3CB1 STEEL 3 KNUCKLE, CONCEALED BEARING FULL MORTISE HINGERecommended for medium weight doors (<150 lbs); Recommended for medium frequency usage (<400 cycles per day); Made with two concealed nylon bearings; Recommended for use with a door...

02-3125 KNOCKER ONLYBolts through door;Made from forged brass.IVES VIEWERS AND DOOR KNOCKERS OVERVIEWIves provides many products to complete any job, including some of the smallest pieces that can easily be forgotten. Our exterior hardware is designed to...

FB457 TOP OR BOTTOM BOLTSWhen the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the...

9266 STRAIGHT LONG DOOR PULL, ROUNDED TIP1-1/4" Diameter tubular barRound tip is standardOptional flat Tip (F) is available. Specify F after model number when ordering.Available in whole 1" increments from 12" to 96"Other lengths available as engineering...

8400 PROTECTION PLATE SPECIFICATIONAll plates, metal and plastic, come standard with four beveled edges andcountersunk mounting holes (B-CS);Protection plates must be ordered in 1⁄2" increments. Available in other sizes,consult customer...

FS455 4" KICK DOWN HOLDERUnits provide simple hold and release, activated with a touch of the foot;Stainless steel spring;Replaceable black non-marring rubber shoes have corrugated bottoms to provide secure grip; Rubber shoe is securely fastened with...

507B RHODES WARDROBE HOOKDecorative design is ideal for all installations;Design complements Rhodes Series pulls and levers;Surface mount;Packaged with fasteners for wood applications.IVES HOOKS OVERVIEWIves supplies hooks, handrail brackets, and window...

FS450 FLOOR STOP & MANUAL DOOR HOLDER - DRYWALL/WOOD Manual type floor holder ideal for interior or exterior use;Accommodates door undercut up to 2-1/2";Replaceable black non-marring rubber tip;Unit functions as a stop but serves as a hold-open...

411R-W WALL BUMPER - ADHESIVEAdhesive-backed wall door stop for use on clean, smooth, flat surfaces only;Non-marring white rubber;Concave design permits knob to strike stop without damaging or engaging lock mechanism.IVES DOOR STOPS OVERVIEWWith a full...

70 HINGE PIN DOOR STOPSEconomical solution for use on low frequency, light weight, residential 3-1/2 or 4" hinged doors where the installation of a standard door stop or overhead is not desirable; Designed for narrow trim installation; High quality...

MB1 AND MB2 MOUNTING BRACKETSAllows stop mounted hardware to be properly installed without damaging the COR coordinator, such as a parallel arm closer or a non-fire-rated surface vertical rod strike;Stop mounted hardware will need to be lowered to...

SB1600M1/SB1600M2 SURFACE BOLTSStandard surface bolt has 3-1/2" throw for maximum security and for doors with larger undercuts;Sleek handle design;Ideal for all types of doors;Fully concealed mounting prevents vandalism;Available in locking version. Unit...

054 DUTCH DOOR BOLTPractical, rugged, attractive bolt for application on dutch doors as well as other areas;Chamfered rod end draws the two leaves of door tightly together;Sufficient tolerance provided in strike opening to allow for misalignment of door...

SB1640 SURFACE BOLTStandard surface bolt has 1" throw for maximum security;Ideal for all types of doors;Fully concealed mounting prevents vandalism;Units packed with wood and machine screws to meet most field conditions;Comes end plug and end plug stud...

7226 3/4" OFFSET PIVOT, 600LB WITH TOP HEADER MOUNT AND BOTTOM BASE MOUNTMaximum door load 600 pounds;Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2";Vertical adjustment range 3/16", with positive locking;Non-handed;7226 Set...

WS45/WS45X AUTOMATIC WALL HOLDER - DRYWALL/WOOD Spring loaded roller rides up the face of the strike, seating itself on the strike, holding the door firmly in the open position.A heavy rubber pad cushions the shock and absorbs the sound.With unit mounted...

CB1 CARRY BARUsed when it is possible for the inactive door to be opened before the active door;Prevents damage to the doors and other hardware;Nylon roller insures quiet and efficient operation;Non-handed;Standard through bolts for mounting. IVES...

157XY FULL SURFACEA patented easy-to-install, heavy duty, full surface continuous hinge;Narrow Frame;Patented center loaded, interlocking bearing design;XY (lateral and vertical) adjustability while hanging the door;Articulating cover design eliminates...

FB31P TOP AND BOTTOM BOLTS (PAIR)For use with metal doors only;Fully automatic—inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened;Low actuation forces—top bolt has...