Shop All Klein Tools

Offset Straight-Cutting Aviation Snips Warnings Never use on or near live electrical circuits. Always wear approved eye protection. NOT insulated. Features Available in 3 cutting patterns: Offset Right-Cutting, Left-Cutting, and Straight-Cutting...

Grip-Cleaning Brush Set Features Made in USA Available in round and square shapes and two lengths for efficient cleaning of different jaw configurations Brushes with stiff wire bristles and semi-flexible steel shafts set into comfortable wooden handles...

Anchor Hook Warnings These are NOT occupational protective devices. Do NOT use for human support. Features Made in USA Maximum safe load 750-pounds (340 kg) Standard on Klein Block & Tackle Packages (Cat. Nos. 1802-30 and H1802-30) Forged hook with...

Swivel Anchor Hook Warnings These are NOT occupational protective devices. Do NOT use for human support. Features These are NOT occupational protective devices. NOT for human support 1-3/16-Inch x 1-Inch (3 cm x 2.5 cm) Swivel Opening and 1-7/8-Inch...

Step Bit Kit, Spiral Double-Fluted, VACO, 4-Piece Warnings Read and follow safety instructions in power tool owner's manual. Always ensure that you and persons in the vicinity wear approved eye protection. Features Rugged case snaps shut with custom...

Step Bit Kit, Spiral Double-Fluted, VACO, 3-Piece Features Total of 17 hole sizes 1/4-Inch hex shank for firm, positive grip in impact driver and standard drill Split point tip quickly starts hole cuts and prevents drifting when pressure is added Two...

3-Step Drill Bit, Double-Fluted, 7/8-Inch to 1-3/8-Inch Features TiN Coating, Impact Shaft, Dual Spiral Fluting Step Drill Bit has 2 spiral flutes to remove chips and help pull the bit through material for faster cutting For use on steel (up to 16...

2-Step Drill Bit, Double-Fluted, 7/8-Inch to 1-1/8-Inch Warnings Always ensure that you and persons in the vicinity wear approved eye protection. Read and follow safety instructions in power tool owner's manual. Features 2 hole sizes Titanium nitride...

12-Step Drill Bit, Double-Fluted, 3/16-Inch to 7/8-Inch Features Split point tip quickly starts hole cuts and prevents drifting when pressure is added Laser-etched hole size markings for quick size identification Titanium nitride coating dissipates heat...

9-Step Drill Bit, Double-Fluted, 1/4-Inch to 3/4-Inch Features 9 hole sizes Split point tip quickly starts hole cuts and prevents drifting when pressure is added Laser-etched hole size markings for quick size identification Titanium nitride coating...

13-Step Drill Bit, Double-Fluted, 1/8-Inch to 1/2-Inch Warnings Read and follow safety instructions in power tool owner's manual. Always ensure that you and persons in the vicinity wear approved eye protection. Features TiN Coating, Impact Shaft,...

All-Purpose Electrician's Scissors Warnings Never use on or near live electrical circuits. Always wear approved eye protection. Features Serrated Blades, Notches Electrician Scissors strip 19 and 23 AWG wire and have notch in tip for deburring...

Self-locking Block Without Rope and Hook Warnings These are NOT occupational protective devices. Do NOT use for human support. Features This item is NOT an occupational protective device; do NOT use for human support Blocks without ropes and...

27-in-1 Multi-Bit Precision Screwdriver with Tamperproof Bits Warnings Never use on or near live electrical circuits. Always wear approved eye protection. Do NOT use to pry or chisel. NOT insulated. Will NOT protect against electrical shock...

27-in-1 Multi-Bit Tamperproof Screwdriver Warnings NOT insulated. Will NOT protect against electrical shock. Do NOT use to pry or chisel. Always wear approved eye protection. Features TORQ-SET® is a registered trademark of Phillips Screw Co; TORX® is...

Tie Wire Reel, Lightweight Aluminum Warnings Always wear approved eye protection. Features Load 12-18 gauge wire easily Made in USA Feeds pre-coiled wire smoothly, easily, and quickly to save time and reduce wasted wire Rugged, lightweight reel is...

Tie Wire Reel Pad Features Slots to accommodate belts up to 2-Inch (5 cm) wide Made in USA Made of 3/16-Inch (5 mm) thick rigging leather and underside has a sponge-rubber pad to minimize hip fatigue Holds Cat. No. 27400 tie-wire reel Worn on the belt...

Quick-Lock Tie Wire Reel Warnings Always wear approved eye protection. Features Lock Lid Black coat adds additional layer of corrosion resistance Tie Wire Reel has push button and sliding latch for quick and easy spool replacement Two-step lock...

Modular Battery for Klein Tools Cat. No. 60155 Hard Hat Cooling Fan Features USB-C to USB-A cable included 3200 mAh capacity battery; up to 10W of total power 4-segment battery status LED indicators Easily attach to Klein Tools hard hats/safety helmets...

Li-Ion Battery Warnings See instruction manual for additional warnings Do not expose to rain, moisture, or snow Keep conductive materials away from battery terminals when storing or in transport Do not use the battery if it appears to be...

Fast Charger, 288W Power Supply With Anderson Powerpole® Warnings For use with Klein Tools and Blackfire products only Features 7.8-Foot long cord provides convenient charging Anderson Powerpole® is a registered trademark of Anderson Power Products,...

Anderson Powerpole®/APP® to 8mm DC Barrel Plug Features Connects Klein Tools Solar Panels to Klein Tools KTB1000 and KTB500 Power Stations The flexible cable easily stores in the pouch of Klein Tools Solar Panel Klein Tools Anderson Powerpole®/APP® to...

12V Auto to 8mm Barrel Adapter Features Charge KTB500 and KTB1000 Power Stations from Vehicle Power Adapter 12V Auto to 8mm Charge your power station conveniently from your vehicle Supplies power by simply plugging into your device Compatible with the...

Mobile Charger with 120W Power Supply Warnings For use with Klein Tools and Blackfire products only Features Charge KTB1000 to 80% in 7.5 hr or in 2.5 hr when Paired with Fast Charger (Cat. No.29035); Fits in Top Compartment of KTB1000 120 VAC to 8mm...