View All Klein Tools

12V Auto to 8mm Barrel Adapter Features Charge KTB500 and KTB1000 Power Stations from Vehicle Power Adapter 12V Auto to 8mm Charge your power station conveniently from your vehicle Supplies power by simply plugging into your device Compatible with the...

Mobile Charger with 120W Power Supply Warnings For use with Klein Tools and Blackfire products only Features Charge KTB1000 to 80% in 7.5 hr or in 2.5 hr when Paired with Fast Charger (Cat. No.29035); Fits in Top Compartment of KTB1000 120 VAC to 8mm...

APP® Compatible Connector to MC4 Adapter, Accessory Parts Features APP® Compatible Connect Solar Panel output to charge Portable Power Stations and Power Banks Anderson Powerpole® (APP®) is a registered trademark of Anderson Power Products, Inc...

200W Solar Panel Carrying Case, Replacement Part Warnings See instruction manual for additional warnings. Features Adjustable Shoulder Strap Outside pocket to store adapters and cables Designed for the 200W Portable Solar Panel, sold separately (Cat...

60W Portable Solar Panel Features Long reaching 16.4-Foot (5 m) cable compatible with KTB1000 fits conveniently in the integrated power pocket, along with adapter to 8mm DC output and input connector to chain an additional solar panel Eyelets on the...

200W Portable Solar Panel Warnings Estimated times and charges are approximate, and not additive, and may vary by application and ambient environmental conditions and were determined based on controlled experiments. Do not place equipment and its...

Klein Tools 3-in-1 HVAC Pocket Screwdriver with Phillips, Slotted, and Schrader BitsProfessional HVAC Service Tool with Interchangeable BitsThe Klein Tools 3-in-1 HVAC Pocket Screwdriver delivers versatile functionality for HVAC technicians and service...

Klein Tools 3-Inch Straight Hand Seamer with Compound Leverage MechanismProfessional HVAC Sheet Metal Fabrication ToolThe Klein Tools 3-Inch Straight Hand Seamer delivers professional-grade sheet metal bending and seaming capabilities for HVAC...

Klein Tools 3-Piece Mini Ratchet and Multi-Bit Driver Set with 5-in-1 Flip SocketProfessional compact tool set for tight space applicationsThe Klein Tools 3-Piece Mini Ratchet and Multi-Bit Driver Set delivers professional performance in confined work...

Klein Tools 3/16-Inch Cabinet Tip Screwdriver with Cushion-Grip Handle and Tip-Ident SystemProfessional precision tool with coated protection and ergonomic designKlein Tools delivers professional-grade performance with this 3/16-inch cabinet tip...

Klein Tools 3/4-Inch Angle Setter� Conduit Bending Tool with Four Preset AnglesPatent Pending Technology for Fast, Accurate Repeated BendsKlein Tools introduces the innovative 3/4-Inch Angle Setter�, a precision conduit bending accessory that creates a...

Klein Tools 3/4-Inch Iron Conduit Bender with Angle Setter� Technology Professional AssemblyPatent Pending Angle Setter� Technology for Precise, Repeatable Conduit BendsKlein Tools delivers professional-grade conduit bending performance with this...

Klein Tools 3/8-Inch Keystone Tip Screwdriver with 8-Inch Square Shank and Cushion-Grip HandleProfessional-grade precision tool with heavy-duty construction for demanding applicationsThe Klein Tools 3/8-Inch Keystone Tip Screwdriver delivers professional...

Klein Tools 3/8-Inch Nut Driver with 3-Inch Hollow Shaft and Cushion-Grip HandleProfessional precision tool with hollow shaft design for extended bolt applicationsKlein Tools delivers professional-grade performance with this 3/8-inch nut driver featuring...

Ratcheting Non-Insulated Terminal Crimper, 10 to 22 AWG Wire Warnings Always wear approved eye protection. NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock. Features Dual-material...

Ratcheting Heat Shrink Terminal Crimper, 10 to 22 AWG Wire Features Dual-material molded grips provide added comfort Unique cavity design provides consistent crimp from either side of the tool Three crimping cavities in one tool: 22–16 AWG (Red), 16–14...

Tinner Snips Features Lightweight magnesium handles 6'' (152 mm) angled, hollow-ground cutting edge for cutting full 3-1/2'' (89 mm) straight cuts and wide curves Cutting capacity: 22 gauge cold-rolled sheet metal; 26 gauge stainless steel sheet metal...

Replacement Blades for Tinner Snips Features Easily replaceable cutting blades made of high-carbon steel Kit includes two blades, four 10-32 Phillips head screws with nuts and one 5/16'' (8 mm) center pivot nut Cutting capacity: 22 gauge cold-rolled...

Lineman's Wrench Features Small end has 5/8-Inch and 13/16-Inch openings; large end features 29/32-Inch and 1-3/32-Inch openings Dark blue painted finish Made in USA Hole is provided at larger end for turning-in standard pole steps Forged from special...

Lineman's Wrench Silver End Features Wrench is suited for use on the heavy three-bolt guy clamps on which clearance is limited Made in USA Forged from special bar steel and heat-treated for long life Dark blue painted finish with small end painted...

Bell System Type Wrench Warnings Do NOT extend handle length. Always wear approved eye protection. Do NOT push or hammer wrench. Features Made in the USA Large end has 1-1/16-Inch and 1-3/16-Inch openings Similar to standard lineman's wrench, but...

5/8" Bi-Metal Hole Saw Features Variable pitch teeth cut faster and smoother while reducing chatter. Rugged cobalt bi-metal construction for maximum longevity. Deep cup cuts through studs in one pass. Note: Set pilot drill point 1/8'' (3 mm) beyond...

1-1/4" Bi-Metal Hole Saw Features Multiple knock-out slots and holes for easy core removal. Variable pitch teeth cut faster and smoother while reducing chatter. Cuts through steel, wood, plastic, stainless steel, and cast iron. Note: Set pilot drill...

2-1/8" Bi-Metal Hole Saw Features Multiple knock-out slots and holes for easy core removal. Deep cup cuts through studs in one pass. Note: Set pilot drill point 1/8'' (3 mm) beyond toothpoints. Longer lasting design for more cuts per saw . Cuts through...