Sioux Chief 0672XV4L 4-Branch ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$88.38
Sioux Chief 0672XV4L 4-Branch Male Sweat Manifold with Valve Center

Sioux Chief 0672XV4L 4-Branch Male Sweat Manifold with Valve Center

(No reviews yet) Write a Review

Model: 0672XV4L-0440-2C

In Stock (leaves warehouse same day if ordered before 3pm ET)

$88.38
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Sioux Chief 0672XV4L 4-Branch Male Sweat Manifold with Valve Center

The Sioux Chief 0672XV4L is a 3/4" male sweat manifold built for rough-in distribution plumbing where a single supply line needs to feed multiple branch lines from one central point. This 4-branch configuration includes a valve center, giving a plumber or contractor shut-off control at each outlet directly at the manifold body instead of running separate stops downstream. The connection type is sweat, meaning each port is sized and prepared for solder/sweat joints to copper tube, a standard rough-in method for supply manifolds installed behind a wall, in a mechanical room, or at a distribution point ahead of fixture branch lines. This manifold is offered in a 3/4" trade size for the main connection, sized for typical residential and light commercial branch supply runs feeding multiple fixtures or zones from a single assembly point.

Key Features

  • Trade Size: 3/4" connection size, sized for standard copper supply branch distribution.
  • Connection Type: Male sweat (solder) connections for joining directly to copper tube using standard sweat-joint techniques.
  • 4-Branch Configuration: Four outlet branches allow a single supply manifold to feed multiple fixture lines or zones from one point.
  • Valve Center: Integrated valve center provides shut-off control at the manifold, simplifying isolation of individual branch lines during service or repair.
  • Manufacturer Part Number: 0672XV4L-0440-2C, allowing exact cross-reference to Sioux Chief documentation and replacement ordering.
  • Packaging: Supplied 1 EA for individual rough-in installation needs.

Technical Specifications

  • Connection Type: Sweat
  • Size: 3/4"
  • Brand: Sioux Chief
  • Manufacturer Part Number: 0672XV4L-0440-2C
  • Packaging: 1 EA

Typical Applications

  • Residential Rough-In Supply Distribution
  • Multi-Fixture Branch Line Feeds From a Single Manifold Point
  • Mechanical Room or Behind-the-Wall Copper Supply Installations
  • Light Commercial Zone Isolation at the Manifold
  • New Construction and Remodel Supply Line Rough-In

Why Sioux Chief?

Sioux Chief manufactures rough-in plumbing components used by professional plumbers and contractors across residential and commercial projects. The 0672XV4L manifold's sweat connections and integrated valve center give installers a straightforward way to distribute and isolate branch supply lines at a single 3/4" point, reducing the number of separate fittings and stops needed downstream. Choosing a Sioux Chief manifold for rough-in supply distribution means selecting a part built specifically for the sweat-joint methods and 4-branch configurations plumbers already use on the job, backed by a traceable manufacturer part number for replacement ordering and documentation cross-reference.

Manufacturer Resources

Product Specs

Product Type:
Manifold
Connection Type:
Sweat
Configuration:
4-Branch with Valve Center
Department:
Plumbing
Product Group:
Rough-In and Supports
Product Subgroup:
Fittings and Valves
Product Size:
3/4"

Sioux Chief 0672XV4L-0440-2C – Frequently Asked Questions

1) Does the Sioux Chief 0672XV4L manifold connect to copper tube by soldering, or is it a press or threaded fitting?
Solder. The 0672XV4L uses male sweat connections, so every port is sized and prepped for a soldered joint to copper tube. There is no thread and no press fitting involved, so plan on a torch, flux and solder at the manifold body. If your rough-in is PEX or you want a mechanical joint, this is the wrong connection type for you.
2) What size supply line does the 0672XV4L 4-branch manifold take?
It is a 3/4 inch trade size manifold, ordered either as 3/4 inch (MPN 0672XV4L-0440-2C) or as 1 x 3/4 inch (MPN 0672XV4L-0440L2). The 3/4 inch main is sized for typical residential and light commercial branch supply runs feeding several fixtures or zones off one assembly point.
3) Do I still need to install separate stops downstream of this manifold?
Not for isolating the branches. The 0672XV4L includes an integrated valve center, which puts shut-off control at each outlet right on the manifold body. That lets you kill one branch for service or repair without running a separate stop on each line downstream, and it cuts the fitting count at the rough-in. Fixture stops at the trim are still a separate decision.
4) Which size should I order, the 3/4 inch or the 1 x 3/4 inch version of the 0672XV4L?
Match it to your incoming main. The straight 3/4 inch build (0672XV4L-0440-2C) is for a 3/4 inch copper supply in and out. The 1 x 3/4 inch build (0672XV4L-0440L2) carries the larger inlet designation, so order that one when the trunk feeding the manifold is 1 inch copper. Both are male sweat.
5) How many fixtures or zones will a 4-branch manifold feed?
Four. The 0672XV4L has four outlet branches off a single 3/4 inch supply, so one manifold handles four fixture lines or four zones. If you need more outlets than that, step up to a larger branch count rather than ganging two manifolds on the same 3/4 inch main.
6) Can this manifold be installed behind a wall or does it have to be in a mechanical room?
Either works. It is a rough-in distribution manifold intended for behind-the-wall copper supply installations, mechanical rooms, or any distribution point ahead of the fixture branch lines. Keep in mind the valve center is the isolation point, so put it somewhere you can still reach to shut a branch down later rather than burying it in a closed cavity.
7) What is the exact manufacturer part number for the 4-branch Sioux Chief sweat manifold with valve center?
Two Sioux Chief numbers cover it: 0672XV4L-0440-2C for the 3/4 inch, and 0672XV4L-0440L2 for the 1 x 3/4 inch. Use the full number when cross-referencing Sioux Chief documentation or ordering a replacement, since the base 0672XV4L designation alone does not pin down the inlet size.
8) Is the 0672XV4L sold individually or in a carton?
One each. The manifold ships as a single unit, which suits a per-job rough-in order rather than a bulk stocking buy.
How fast can I get the Sioux Chief 0672XV4L-0440-2C delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 0672XV4L-0440-2C come with a warranty?
Absolutely. The Sioux Chief 0672XV4L-0440-2C is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 0672XV4L-0440-2C?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 0672XV4L-0440-2C from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!