Sioux Chief 608-L2187 1/2" FTG...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$13.96
Sioux Chief 608-L2187 1/2" FTG Stub-Out 90° Elbow, 18" x 7" Legs

Sioux Chief 608-L2187 1/2" FTG Stub-Out 90° Elbow, 18" x 7" Legs

(No reviews yet) Write a Review

Model: 608-L2187

In Stock (leaves warehouse same day if ordered before 3pm ET)

$13.96
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Sioux Chief 608-L2187 1/2" FTG Stub-Out 90° Elbow, 18" x 7" Legs

The Sioux Chief 608-L2187 is a 1/2" FTG stub-out 90° elbow engineered for behind-the-wall rough-in plumbing, giving contractors a fixed fitting-to-stub transition with 18" and 7" leg lengths that carry a supply line through wall or floor framing to a precise fixture location. The 1/2" FTG connection is sized to copper tube size (CTS) for a standard rough-in joint, and this component is manufactured in the United States and packaged 50 per carton, making it a practical job-lot item for plumbing contractors stocking rough-in fittings for tub, shower, and appliance supply stub-outs.

Key Features

  • Trade Size: 1/2" FTG connection sized to copper tube size (CTS) for compatibility with standard rough-in fitting ends.
  • 90° Stub-Out Configuration: Fixed elbow geometry with 18" and 7" leg lengths positions the finished stub-out precisely behind the wall or floor surface.
  • Rough-In Elbow Design: The ELL configuration routes the supply line through a 90° turn from the fitting end to the exposed stub, reducing the number of separate fittings needed at the rough-in stage.
  • Stub-Out Application: Built for exposed fixture connections such as tub and shower valve supplies, appliance stub-outs, and fixture risers set during rough-in.
  • Country of Origin: Manufactured in the United States.
  • Carton Packaging: Supplied 50 EA per carton, sized for job-lot ordering and warehouse stocking by plumbing contractors and wholesalers.

Technical Specifications

  • Trade Size: 1/2" FTG
  • Configuration: 90° Stub-Out Elbow (ELL)
  • Leg Lengths: 18" x 7"
  • Country of Origin: United States
  • Packaging: 50 EA per carton

Typical Applications

  • Behind-the-Wall Rough-In Plumbing
  • Fixture Supply Stub-Outs
  • Tub and Shower Valve Rough-In
  • Appliance and Fixture Riser Stub-Outs
  • New Construction and Remodel Plumbing

Why Sioux Chief?

Sioux Chief builds rough-in fittings like the 608-L2187 stub-out elbow to give plumbing contractors a consistent, code-familiar component for behind-the-wall installations. The fixed 18" x 7" leg configuration and 1/2" FTG connection keep rough-in layout straightforward and repeatable across units, while United States manufacturing and 50 EA carton packaging support dependable supply for production and remodel jobs alike. For contractors setting stub-outs ahead of a rough-in inspection, a dedicated fitting-to-stub elbow like this one keeps the job moving without improvising a multi-fitting workaround at the wall.

Manufacturer Resources

Sioux Chief Product Catalog

Product Specs

Product Type:
Elbow
Angle:
90°
Configuration:
Stub-Out
Country Of Origin:
United States
Department:
Plumbing
Product Group:
Rough-In and Supports
Product Subgroup:
Fittings and Valves
Product Size:
1/2"
Cubic Volume:
0.8113

Sioux Chief 608-L2187 – Frequently Asked Questions

1) What does the 1/2" FTG end on the Sioux Chief 608-L2187 stub-out elbow connect to?
FTG means the end is sized as a fitting end, matching 1/2 inch copper tube size, so it slips into the socket of a standard 1/2 inch copper fitting rather than over the tube. Think of it as the male side of the joint: it lands inside a 1/2 inch coupling, tee, or valve socket. If you need an end that receives 1/2 inch tube instead, an FTG end is the wrong side for you.
2) How long are the legs on the 608-L2187 stub-out elbow?
Two fixed legs, 18 inches and 7 inches, meeting at a 90 degree turn. The long leg is what carries the supply through the framing to the fixture location and the short leg is the exposed stub side. Because the geometry is fixed, you lay out your rough-in around those dimensions instead of cutting and coupling multiple fittings at the wall.
3) Is a stub-out elbow better than building the turn from separate copper fittings?
For a fixture stub-out, a one-piece stub-out ell like the 608-L2187 gives you a single 90 degree run with 18 and 7 inch legs and no intermediate joints to solder inside the wall cavity, which is where leaks are worst to find. Building it from a street ell plus cut tube works, but it adds two joints and makes the stub projection depend on how accurately you cut. If your stub needs a length the fixed legs cannot give, then loose fittings and cut tube are the way to go.
4) What jobs is the Sioux Chief 608-L2187 used for?
Behind-the-wall rough-in: tub and shower valve supplies, appliance stub-outs, and fixture risers set before the rough-in inspection. It suits both new construction and remodel work. Property managers and production builders repeating the same unit layout get the most out of it, since the fixed 18 x 7 inch leg geometry makes every stub land in the same place.
5) What is the exact part number to order this Sioux Chief stub-out elbow?
Order Sioux Chief 608-L2187. That is the manufacturer part number for the 1/2 inch FTG, 90 degree stub-out ell with 18 x 7 inch legs. The leg lengths are part of the model identity, so a different leg combination is a different number in the 608 stub-out family.
6) How is the 608-L2187 packaged, and can I buy less than a carton?
Sioux Chief packs the 608-L2187 stub-out ell 50 each per carton, which is how it is built for job-lot and warehouse stocking by contractors and wholesalers. Plan quantities in that light if you are stocking a multi-unit job.
How fast can I get the Sioux Chief 608-L2187 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 608-L2187 come with a warranty?
Absolutely. The Sioux Chief 608-L2187 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 608-L2187?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 608-L2187 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!