Sioux Chief 609-D288E Sweat No...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$15.44
Sioux Chief 609-D288E Sweat No-Lead Double Stub Out Elbow, 1/2" CTS Copper

Sioux Chief 609-D288E Sweat No-Lead Double Stub Out Elbow, 1/2" CTS Copper

(No reviews yet) Write a Review

Model: 609-D288E

In Stock (leaves warehouse same day if ordered before 3pm ET)

$15.44
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
"

Sioux Chief 609-D288E Sweat No-Lead Double Stub Out Elbow

The Sioux Chief 609-D288E is a sweat no-lead double stub out elbow built for rough-in copper supply work, sized for 1/2\" CTS Type L copper tube. This fitting terminates two separate stub outs from a single branch line, making it a go-to choice when a plumber needs to bring both a hot and cold supply (or two supplies off the same run) out of the wall for fixture connections. The female sweat connections are designed for solder joints to copper tube, and the no-lead construction supports potable water supply rough-in applications.

Key Features

  • Trade Size: 1/2\" CTS for standard copper branch line stub outs.
  • Copper Type L: Matches Type L copper tube for the stub out legs.
  • Female Sweat Connection: Solder-joint ends for secure, leak-resistant copper-to-copper connections.
  • No-Lead Construction: Suitable for potable water supply rough-in installations.
  • Brazed Stub Out Joint: The brazed joint at the stub out will not fracture during installation or service, reducing callbacks.
  • Crimped Square O Strap: The Square O Strap is crimped to the tube for a secure, stable mounting point behind the finished wall.
  • Double Stub Out Configuration: Delivers two independent supply stub outs from a single branch line connection.

Technical Specifications

  • Copper Type: L
  • CTS: 1/2\"
  • Min Qty: 25
  • Case Qty: 25
  • Packaging: Bulk

Typical Applications

  • Running sink and dishwasher supply lines (hot side) off a single branch line
  • Running sink and ice maker supply lines (cold side) off a single branch line
  • Residential and light commercial copper supply rough-in
  • Behind-the-wall fixture supply stub out installations
  • New construction and remodel copper plumbing rough-in

Why Sioux Chief?

Sioux Chief builds rough-in copper fittings like the 609-D288E with a brazed stub out joint designed not to fracture and a crimped Square O Strap for a stable, secure mounting point behind the wall. The no-lead, Type L-compatible sweat connections give plumbers a reliable way to split hot or cold supply branch lines into two clean stub outs without extra fittings, keeping rough-in work efficient and dependable on the job site.

"

Manufacturer Resources

Product Specs

Product Type:
Stub Out Elbow
Connection Type:
Sweat
Standards:
No-Lead
Configuration:
Double Stub Out
Department:
Plumbing
Product Group:
Rough-In and Supports
Product Subgroup:
Fittings and Valves
Product Material:
Copper
Product Size:
1/2"

Sioux Chief 609-D288E – Frequently Asked Questions

1) Does the Sioux Chief 609-D288E double stub out elbow work with PEX or does it need copper?
Copper only. The 609-D288E has female sweat ends meant to be soldered to 1/2 inch CTS copper tube, and the stub out legs are Type L copper. If you are roughing in with PEX you need a PEX stub out ell instead, not this fitting.
2) What is the point of a double stub out elbow instead of two single ones?
A double stub out elbow like the 609-D288E takes one 1/2 inch branch line connection and brings two independent stub outs out of the wall. Typical use is a sink plus a dishwasher on the hot side, or a sink plus an ice maker on the cold, without adding a tee and extra fittings. If each fixture connection comes off its own separate branch run, single stub out ells are the simpler choice.
3) Can I use the 609-D288E on a potable water line?
Yes. The 609-D288E is no-lead construction and is built for potable water supply rough-in work, hot or cold side.
4) How does the 609-D288E stub out get secured behind the drywall?
It comes with a Square O Strap crimped to the tube, which gives you the mounting point to fasten to the stud or blocking before the wall is closed up. No separate bracket needed.
5) Is the Sioux Chief 609-D288E sold individually or by the case?
Bulk packaging, 25 per case, with a 25-piece minimum order. It is a rough-in fitting sold in quantity, not a single-unit counter item, so it suits plumbers stocking a truck or a multi-unit job rather than a one-off repair.
6) Do I solder the branch line into this fitting or is it push-fit?
Soldered. The connections are female sweat, so you prep, flux and solder 1/2 inch copper tube into the sockets. Budget for torch work at the fitting; there is no press or push-to-connect option on the 609-D288E.
7) Will 1/2 inch Type M copper work with this stub out elbow, or does it have to be Type L?
The 609-D288E legs are Type L copper at 1/2 inch CTS. Since CTS outside diameter is the same across Type M, L and K, a 1/2 inch Type M branch line solders into the same sweat socket; the wall thickness differs, not the OD. Check your local code, as some jurisdictions require Type L for supply rough-in.
8) Will the stub out joint break if I bend or stress the leg during install?
The stub out joint on the 609-D288E is brazed rather than soldered, and Sioux Chief builds it so the joint will not fracture during installation or service. That is the joint most likely to get stressed when a trim carpenter or a drywaller knocks the stub.
How fast can I get the Sioux Chief 609-D288E delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 609-D288E come with a warranty?
Absolutely. The Sioux Chief 609-D288E is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 609-D288E?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 609-D288E from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!