Sioux Chief 632WG222M 1/2" Bar...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$14.51
Sioux Chief 632WG222M 1/2" Barb x 1/2" MIP No-Lead Brass 90° Elbow

Sioux Chief 632WG222M 1/2" Barb x 1/2" MIP No-Lead Brass 90° Elbow

(No reviews yet) Write a Review

Model: 632WG222M

In Stock (leaves warehouse same day if ordered before 3pm ET)

$14.51
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
"

Sioux Chief 632WG222M 1/2\" Barb x 1/2\" MIP No-Lead Brass 90° Elbow

The Sioux Chief 632WG222M is a one-piece, no-lead brass 90° elbow built for rough-in plumbing where a barb connection needs to transition to a male iron pipe (MIP) threaded connection. Sized at 1/2\" barb x 1/2\" MIP, this fitting is machined from a single piece of brass with a full-flow bore that eliminates the restriction points common in multi-piece or cast fittings. Plumbers and contractors use this elbow to make clean 90° direction changes behind walls, under floors, and at fixture connections without sacrificing flow volume. The no-lead brass construction is appropriate for potable water applications where lead-free fittings are required by local plumbing code.

Key Features

  • Trade Size: 1/2\" barb x 1/2\" MIP connection for standard residential and light commercial supply lines.
  • One-Piece No-Lead Brass: Machined from a single piece of no-lead brass for a durable, corrosion-resistant fitting suitable for potable water rough-in work.
  • Full Flow Design: The internal bore is engineered with no restriction, maintaining consistent water flow through the 90° turn.
  • 90° Elbow Configuration: Allows a clean direction change in tight rough-in spaces where a straight run isn't possible.
  • Barb x MIP Transition: Barb end accepts push-on or clamp-style tubing connections, while the MIP end threads directly into female-threaded fittings, valves, or stops.
  • Country of Origin: Manufactured in the United States.

Technical Specifications

  • Trade Size: 1/2\" Barb x 1/2\" MIP
  • Material: One-Piece No-Lead Brass
  • Configuration: 90° Elbow
  • Country of Origin: United States
  • Cubic Volume: 0.12919215
  • Packaging: 50 EA per pack

Typical Applications

  • Residential and Light Commercial Rough-In Plumbing
  • Potable Water Supply Line Direction Changes
  • Barb-to-Threaded Transitions Behind Walls and Under Floors
  • Fixture Supply Connections Requiring a 90° Turn
  • Renovation and New Construction Plumbing Runs

Why Sioux Chief?

Sioux Chief builds this elbow from one-piece no-lead brass with a full-flow bore, giving plumbers a dependable, code-conscious fitting for potable water rough-in work. The single-piece construction reduces the number of joints that can fail over time, and the full-flow design means contractors don't have to compensate for restricted water pressure at the 90° turn. For plumbers who need a reliable barb-to-MIP transition fitting that holds up behind the wall, this no-lead brass elbow is a practical, straightforward choice.

"

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Elbow
Angle:
90°
Connection Type:
Barb x MIP
Standards:
No-Lead
Country of Origin:
United States
Department:
Plumbing
Product Group:
Rough-In and Supports
Product Subgroup:
Fittings and Valves
Product Material:
Brass
Product Size:
1/2"

Sioux Chief 632WG222M – Frequently Asked Questions

1) What do the two ends of the Sioux Chief 632WG222M elbow connect to?
One end is a 1/2 inch barb that takes push-on or clamp-style tubing; the other is a 1/2 inch male iron pipe thread that screws into any female-threaded fitting, valve, or stop. So it is the piece you use when flexible tubing has to turn 90 degrees and land on a threaded connection.
2) Is the 632WG222M brass elbow safe for potable water lines?
It is made of no-lead brass, which is what plumbing codes call for on potable water. Sioux Chief machines it from one piece of brass, so there are no joints in the fitting itself to fail behind a wall.
3) Will a 1/2 inch MIP brass elbow restrict flow at the turn?
No. The bore through the 632WG222M is a full-flow design with no internal restriction, so you do not have to allow for a pressure drop at the 90 degree change of direction the way you would with a multi-piece or cast fitting.
4) Is the Sioux Chief 632WG222M made in the USA for a job with domestic sourcing requirements?
Yes, country of origin is the United States, which matters on public and institutional work carrying domestic-content language.
5) Can I thread the 632WG222M elbow directly into a 1/2 inch FIP angle stop?
Yes. The MIP leg is a 1/2 inch male pipe thread, so it mates with any 1/2 inch female pipe thread, including stops, valves, and drop-ear or female adapters. Use pipe sealant or PTFE tape on the threads as you would with any brass-to-brass IP joint.
6) Is a barb fitting the right choice, or should I use a crimp or press fitting instead?
The 632WG222M is a barb design: the tubing slides over the ridged end and is held by a clamp or push-on grip. That suits PEX or poly tubing runs where you are working with a clamp tool already in the box. If your spec calls for a crimp ring or a press connection system, that is a different fitting family and this one will not substitute for it. On the threaded side there is no such question, 1/2 inch MIP is 1/2 inch MIP.
7) How many Sioux Chief 632WG222M elbows come in a pack?
They are packaged 50 each per pack, which is how most rough-in crews buy them for a multi-fixture job. The part number for the fitting itself is 632WG222M.
How fast can I get the Sioux Chief 632WG222M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 632WG222M come with a warranty?
Absolutely. The Sioux Chief 632WG222M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 632WG222M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 632WG222M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!