Sioux Chief 632XG222M 1/2" PEX...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$6.79
Sioux Chief 632XG222M 1/2" PEX x 1/2" MIP No-Lead Brass 90° Elbow

Sioux Chief 632XG222M 1/2" PEX x 1/2" MIP No-Lead Brass 90° Elbow

(No reviews yet) Write a Review

Model: 632XG222M

In Stock (leaves warehouse same day if ordered before 3pm ET)

$6.79
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Sioux Chief 632XG222M 1/2" PEX x 1/2" MIP No-Lead Brass 90° Elbow

The Sioux Chief 632XG222M 1/2" PEX x 1/2" MIP No-Lead Brass 90° Elbow is a rough-in fitting built to connect 1/2" PEX tubing to a 1/2" male iron pipe (MIP) threaded connection while turning the line a full 90°. Machined as one-piece no-lead brass, the fitting has no secondary seam at the transition point, keeping the connection solid through PEX termination on one end and threading into a mating female fitting on the other. It is sized for behind-the-wall and under-floor rough-in work where a plumber needs to change the direction of a PEX run and step down to a threaded connection for a valve, fixture, or appliance supply in a single fitting. Sioux Chief ships this 632XG222M elbow 50 to a carton and manufactures it in Vietnam.

Key Features

  • Trade Size: 1/2" PEX x 1/2" MIP, sized to connect 1/2" PEX tubing directly to 1/2" male iron pipe threads for common residential and light commercial branch and fixture supply runs.
  • One-Piece No-Lead Brass Body: a single-piece construction that eliminates a secondary joint at the elbow, reducing potential leak points compared with assembled two-piece transition fittings.
  • 90° Elbow Configuration: turns the PEX run a full 90°, letting installers route around studs, joists, and other framing without stacking separate elbow and adapter fittings.
  • MIP Threaded Outlet: the 1/2" male iron pipe thread end mates with standard female-threaded valves, stub-outs, and fixture connections.
  • No-Lead Brass Construction: brass formulated to no-lead content for use where no-lead fittings are specified on the potable side of a rough-in.
  • Carton Packaging: packed 50 per carton for stocking rough-in trucks and warehouse shelving.

Technical Specifications

  • Product Type: Elbow
  • Trade Size: 1/2" PEX x 1/2" MIP
  • Angle: 90°
  • Material: One-Piece No-Lead Brass
  • Country of Origin: Vietnam
  • Packaging: 50 EA per carton

Typical Applications

  • PEX-to-Threaded Transitions Behind Walls and Under Floors
  • Fixture, Valve, and Stub-Out Supply Connections
  • Residential and Light Commercial Rough-In Plumbing
  • New Construction PEX Distribution Runs
  • Remodel and Retrofit PEX-to-MIP Transitions

Why Sioux Chief?

Sioux Chief machines the 632XG222M from one-piece no-lead brass, giving rough-in plumbers a durable, corrosion-resistant fitting for PEX-to-threaded transitions with one less joint than a multi-piece adapter. The 1/2" PEX x 1/2" MIP sizing and 90° bend make it a straightforward, single-fitting solution for routing PEX runs to a threaded valve or fixture connection, and the 50-count carton packaging keeps trucks and shelves stocked for ongoing rough-in work with Sioux Chief fittings.

Product Specs

Cubic Volume:
0.11847915
Product Type:
Elbow
Department:
Plumbing
Product Group:
Rough-In and Supports
Product Subgroup:
Fittings and Valves
Product Size:
1/2"

Sioux Chief 632XG222M – Frequently Asked Questions

1) Does the Sioux Chief 632XG222M elbow need a crimp ring, or is it a push-fit connection?
The 632XG222M is a 1/2 inch PEX barb end, so it terminates with a ring on the tubing side (crimp or clamp per your tool system), not a push-to-connect. The other end is a 1/2 inch male iron pipe thread that screws into a female-threaded valve, stub-out, or fixture connection. Plan on PEX rings plus thread sealant or tape; neither is included with the fitting.
2) Can I use a PEX to MIP brass elbow on potable water lines?
Yes. The Sioux Chief 632XG222M is machined from no-lead brass, which is what gets specified on the potable side of a rough-in. It is sold for residential and light commercial branch and fixture supply runs.
3) Will one fitting handle both the 90 degree turn and the thread transition, or do I need an elbow plus an adapter?
One fitting does both. The 632XG222M turns the PEX run a full 90 degrees and lands on a 1/2 inch male pipe thread, so you are not stacking a PEX elbow onto a separate PEX-to-MIP adapter. It is one-piece brass with no secondary joint at the bend, which means one less potential leak point behind the wall.
4) I need a 1/2 inch PEX connection to a female threaded shutoff valve. Is this the right part?
Yes, that is exactly the pairing. The male iron pipe end on the 632XG222M threads into a female-threaded valve, stub-out, or fixture connection. If the valve you have is male-threaded instead, this elbow won't work for you, you'd need a PEX x FIP fitting.
5) Does this PEX elbow work for a remodel where I'm tying new PEX into existing threaded copper or galvanized stub-outs?
That is one of its stated uses. The 632XG222M is listed for remodel and retrofit PEX-to-MIP transitions, so as long as the existing stub-out or valve is 1/2 inch female threaded, the elbow threads straight in and you crimp the new 1/2 inch PEX to the barb end.
6) What is the exact part number to order for a Sioux Chief 1/2 inch PEX x 1/2 inch MIP 90 degree brass elbow?
Order Sioux Chief 632XG222M. That part number covers the 1/2 inch PEX barb by 1/2 inch male iron pipe thread, 90 degree no-lead brass elbow.
7) How is the Sioux Chief 632XG222M elbow packaged, and can I buy less than a full box?
Sioux Chief packs the 632XG222M 50 each to a carton, which is how it is stocked for rough-in trucks and shelving. The fitting itself is made in Vietnam.
How fast can I get the Sioux Chief 632XG222M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 632XG222M come with a warranty?
Absolutely. The Sioux Chief 632XG222M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 632XG222M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 632XG222M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!