Sioux Chief 633WG18FPT 3/4" PE...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$69.93
Sioux Chief 633WG18FPT 3/4" PEX x FIP Swivel Supply Valve, No-Lead Brass

Sioux Chief 633WG18FPT 3/4" PEX x FIP Swivel Supply Valve, No-Lead Brass

(No reviews yet) Write a Review

Model: 633WG18FPT

In Stock (leaves warehouse same day if ordered before 3pm ET)

$69.93
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Sioux Chief 633WG18FPT 3/4" PEX x FIP Swivel Supply Valve, No-Lead Brass

The Sioux Chief 633WG18FPT is a 3/4" F1960 PEX expansion x 3/4" FIP swivel supply valve built for rough-in water distribution and appliance supply-line connections. Constructed from Type L copper tube with NL/DZR (No-Lead, dezincification-resistant) components, it delivers a full-flow, no-restriction waterway with no internal choke points. The brass FIP swivel nut arrives with a factory-installed gasket for a leak-resistant connection, and the lead-free solder joint supports compliant potable-water rough-in work.

Key Features

  • Trade Size: 3/4" F1960 PEX expansion connection x 3/4" FIP swivel connection for direct rough-in installation.
  • Type L Copper Tube Construction: Built from Type L copper tube for corrosion resistance and long service life behind the wall.
  • No-Lead / DZR Brass: Manufactured to NL/DZR (No-Lead, dezincification-resistant) standards for potable water supply applications.
  • Full-Flow Design: No internal restriction, so water flows through the valve at full volume with minimal pressure loss.
  • Brass FIP Swivel Nut with Gasket: The factory-installed gasket seals the connection - do not apply pipe dope to the FIP swivel threads.
  • Lead-Free Solder Joint: Joint construction supports lead-free solder practices for compliant potable-water rough-in.

Certifications & Compliance

  • No-Lead / DZR (Dezincification-Resistant) Brass Components

Technical Specifications

  • Connection: 3/4" F1960 PEX Expansion x 3/4" FIP Swivel
  • Body Material: Type L Copper Tube
  • Swivel Nut Material: Brass with Factory-Installed Gasket
  • Country of Origin: United States
  • Packaging: 10 EA per pack

Typical Applications

  • Washing Machine and Appliance Supply-Line Connections
  • PEX Rough-In Water Distribution Systems
  • Potable Water Supply Shut-Off Points
  • Residential and Light Commercial Plumbing Installations
  • New Construction and Remodel Rough-In Plumbing

Why Sioux Chief?

Sioux Chief builds this 3/4" F1960 PEX x FIP swivel valve from Type L copper tube with NL/DZR brass components, giving plumbers a full-flow, no-restriction connection point that installs cleanly behind the wall. The factory-installed swivel gasket and lead-free solder joint construction help contractors complete a reliable, potable-water-compliant rough-in without extra sealant on the swivel threads. It's a straightforward, code-conscious component built for professional installation.

Product Specs

Product Type:
Supply Stop
Connection Type:
PEX Expansion (F1960)
Standards:
No-Lead
Country Of Origin:
United States
Department:
Plumbing
Product Group:
Rough-In and Supports
Product Subgroup:
Fittings and Valves
Product Material:
Copper
Product Size:
3/4"

Sioux Chief 633WG18FPT – Frequently Asked Questions

1) What connections does the Sioux Chief 633WG18FPT washing machine valve use?
It's a 3/4 inch F1960 PEX expansion inlet by 3/4 inch FIP swivel outlet. The PEX side takes cold-expansion (F1960) fittings, so you need an expansion tool and F1960 rings, not crimp rings. The FIP swivel nut threads onto a 3/4 inch male hose or nipple thread connection.
2) Should I use pipe dope or tape on the FIP swivel nut of the 633WG18FPT?
No. The brass swivel nut comes with a factory-installed gasket that makes the seal. Adding pipe dope or tape to the swivel threads can interfere with the gasket seating. Just hand-tighten and snug with a wrench.
3) Is the Sioux Chief 633WG18FPT approved for potable water?
Yes. The valve is built with No-Lead, dezincification-resistant (NL/DZR) brass components and a lead-free solder joint, which is what potable water rough-in requires. The tube body is Type L copper.
4) Does this valve restrict flow to a washing machine?
No. It's a full-flow design with no internal choke point, so a 3/4 inch line stays 3/4 inch through the valve. That matters on appliance supply runs and on long branch lines where you're already losing pressure.
5) Can this valve be used as a general shut-off in a PEX water distribution system, or is it only for washing machines?
Both. It's a supply stop for appliance supply-line connections like a washer, and it also works as a shut-off point on PEX rough-in distribution, in new construction or remodel, residential or light commercial. The limit is the connection set: 3/4 inch F1960 PEX in, 3/4 inch FIP swivel out.
6) How many Sioux Chief 633WG18FPT valves come in a pack?
They ship 10 each per pack, which suits a multi-family or tract rough-in where you're setting a washer box on every unit. Single-unit remodel work means you'll have spares.
7) Where is the Sioux Chief 633WG18FPT made?
United States. That matters on public and institutional jobs carrying domestic-sourcing requirements on plumbing components.
How fast can I get the Sioux Chief 633WG18FPT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 633WG18FPT come with a warranty?
Absolutely. The Sioux Chief 633WG18FPT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 633WG18FPT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 633WG18FPT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!