Sioux Chief 69660 OXBOX TurboV...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$31.06
Sioux Chief 69660 OXBOX TurboVent AAV ABS Adapter, 6961 Series

Sioux Chief 69660 OXBOX TurboVent AAV ABS Adapter, 6961 Series

(No reviews yet) Write a Review

Model: 696-11A

In Stock (leaves warehouse same day if ordered before 3pm ET)

$31.06
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Sioux Chief 69660 OXBOX TurboVent AAV ABS Adapter, 6961 Series

The Sioux Chief 69660 OXBOX TurboVent Air Admittance Valve ABS Adapter, part of the 6961 Series, is a rough-in drain-waste-vent accessory designed to pair with Sioux Chief's TurboVent AAV line for venting fixture drains without a full vent stack penetration. This adapter is available in 1-1/2" and 2" sizes to match common ABS DWV drain connections, and is built in ABS for direct compatibility with ABS DWV piping systems. Each unit ships with a DWV connection adapter included and a protective debris cover to keep the opening clean during rough-in and finish work. The internal actuating device spins with every activation of the valve, continuously clearing the seal surface of dust and construction debris so it keeps sealing reliably over the life of the installation. This is a behind-the-wall/under-floor component intended for plumbers and contractors performing DWV rough-in - it is not a decorative or exposed fixture, and the valve seals tight against up to 13 PSIG of back-pressure once closed, across both available sizes.

Key Features

  • Available Sizes: Offered in 1-1/2" and 2" connections to fit common ABS DWV drain lines.
  • ABS Construction: Molded ABS body for direct compatibility with ABS DWV drain piping.
  • TurboVent AAV Design: Self-sealing air admittance valve that opens during drainage and reseals to admit air into the drain line, reducing the need for a conventional vent stack run.
  • Back-Pressure Seal Rating: Valve seals tight against up to 13 PSIG of back-pressure once closed.
  • Self-Cleaning Seal: Internal actuating device spins with each activation, keeping the seal face free of dust and debris for consistent long-term performance.
  • DWV Connection Adapter Included: Adapter fitting included for tying the OXBOX TurboVent unit into existing DWV connections.
  • Protective Debris Cover: Ships with each unit to shield the valve opening from job-site dust and debris prior to final hookup.
  • Installation Note: Do not use pipe dope on this fitting - solvent-weld/press-fit assembly per manufacturer instructions.

Technical Specifications

  • Country of Origin: USA
  • Series: 6961
  • Material: ABS
  • Back-Pressure Seal: Up to 13 PSIG
  • Available Sizes: 1-1/2", 2"

Typical Applications

  • Residential and Commercial DWV Rough-In
  • Fixture Drain Venting Where a Full Vent Stack Is Impractical
  • Remodel and Renovation Plumbing
  • New Construction ABS Drain-Waste-Vent Systems
  • Island Fixture and Secondary Drain Line Venting

Why Sioux Chief?

Sioux Chief engineers its OXBOX TurboVent line with a self-cleaning actuating mechanism and an included DWV connection adapter so plumbers can complete a venting connection without sourcing extra fittings on the job. The ABS construction and 13 PSIG back-pressure seal reflect a design built for dependable, low-maintenance performance behind the wall, available in both 1-1/2" and 2" sizes to match the job. Manufactured in the United States, this 6961 Series adapter is built for professional rough-in plumbers who need a reliable, code-minded venting solution for ABS DWV systems.

[{"name": "Product Material", "value": "ABS"}, {"name": "Product Type", "value": "Air Admittance Valve Adapter"}, {"name": "Trade Size", "value": "1-1/2\" - 2\""}, {"name": "Series", "value": "6961"}, {"name": "Country of Origin", "value": "United States"}]

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
AAV Adapter
Series:
6961
Country of Origin:
United States
Department:
Plumbing
Product Group:
Rough-In and Supports
Product Subgroup:
Rough-In Boxes
Product Material:
ABS
Product Size:
2"

Sioux Chief 696-11A – Frequently Asked Questions

1) Will the Sioux Chief 69660 TurboVent AAV adapter solvent weld to ABS DWV pipe?
Yes. The 6961 Series OXBOX TurboVent adapter is molded ABS, so it bonds directly to ABS DWV piping with ABS solvent cement. Do not use pipe dope on the fitting; it is assembled solvent-weld/press-fit per the manufacturer's instructions. If your drain lines are PVC, this is the wrong material match.
2) Can I use an air admittance valve instead of running a vent stack through the roof for an island sink?
That is exactly what the TurboVent AAV is for. It opens to admit air into the drain when the fixture discharges and reseals afterward, so a fixture drain can be vented without a full vent stack penetration. It is commonly used for island fixtures, secondary drain lines, and remodel work where a stack run is impractical. Local code still governs where AAVs are permitted, so verify with your inspector on the jurisdiction.
3) How much back pressure will the Sioux Chief TurboVent valve hold without leaking sewer gas?
Once closed, the valve seals tight against up to 13 PSIG of back pressure. That applies to both the 1-1/2 inch and 2 inch versions.
4) Do air admittance valves clog up with drywall dust and construction debris behind the wall?
The TurboVent design addresses that directly. An internal actuating device spins every time the valve activates, wiping the seal face clear of dust and debris so it keeps sealing over the life of the install. Each unit also ships with a protective debris cover to keep the opening clean during rough-in and finish work.
5) Do I need to buy a separate fitting to tie the OXBOX TurboVent into my DWV line?
No extra fitting to source. A DWV connection adapter is included with each unit for tying the TurboVent into the existing DWV connection, along with the debris cover.
6) Is the Sioux Chief 6961 Series AAV adapter a finish part or does it go behind the wall?
It is a rough-in component, installed behind the wall or under the floor as part of the drain-waste-vent system. It is not a decorative or exposed fixture, so plan on access per code rather than treating it as trim.
7) Is the Sioux Chief OXBOX TurboVent made in the USA?
Yes, the 6961 Series TurboVent AAV adapter is manufactured in the United States, which matters on jobs with domestic-sourcing requirements.
How fast can I get the Sioux Chief 696-11A delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 696-11A come with a warranty?
Absolutely. The Sioux Chief 696-11A is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 696-11A?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 696-11A from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!