Sioux Chief ABS Closet Flange ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$8.78
Sioux Chief ABS Closet Flange with Stainless Steel Swivel Ring

Sioux Chief ABS Closet Flange with Stainless Steel Swivel Ring

(No reviews yet) Write a Review

Model: 887-AM

In Stock (leaves warehouse same day if ordered before 3pm ET)

$8.78
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Sioux Chief ABS Closet Flange with Stainless Steel Swivel Ring

The Sioux Chief closet flange line with stainless steel swivel ring is a family of one-piece ABS closet flanges built for rough-in toilet connections on ABS drain-waste-vent piping, offered across four configurations — 886-4AM, 886-4ATM, 887-AM, and 888-AM — to cover common hub and swivel-ring sizing needs on the jobsite. Each flange body is molded from ABS plastic for a solvent-weld hub connection into the DWV stack, while the floor-level swivel ring is corrosion-resistant 430 stainless steel, letting the installer rotate the closet bolt slots into alignment with the fixture after the ABS hub has already been solvent-welded and set in position. One model in the line, the 887-AM, is built around a 3" hub connection with a 4" outer swivel ring interface, representative of the hub-to-ring sizing used throughout the family. This one-piece design keeps the ABS flange and the stainless swivel ring as a single assembly across every model in the line, reducing field parts and simplifying the rough-in step before the finish floor and toilet are installed. Because the swivel ring turns independently of the solvent-welded hub, plumbers can correct bolt-slot orientation without breaking the pipe joint, which is a common callback issue with fixed-ring ABS flanges. Flanges in this family ship 25 pieces per carton and are manufactured in the United States, giving contractors a dependable supply chain for repeat rough-in orders across any of the four model options.

Key Features

  • Model Options: Available as 886-4AM, 886-4ATM, 887-AM, or 888-AM to match specific rough-in requirements.
  • Hub and Swivel Ring Sizing: The 887-AM configuration uses a 3" hub connection with a 4" swivel ring interface, sized for standard closet rough-in drain lines.
  • One-Piece Construction: ABS flange body and swivel ring are supplied as a single assembly, reducing the number of loose parts handled on the jobsite.
  • Corrosion-Resistant Swivel Ring: 430 stainless steel ring rotates independently of the solvent-welded ABS hub, allowing closet bolt slots to be aligned after the pipe joint is set.
  • ABS Body: Solvent-weld ABS construction mates directly into ABS DWV piping systems common in rough-in plumbing.
  • Packaging: Supplied 25 pieces per carton for distributor and contractor stocking.
  • Domestic Manufacturing: Made in the United States.

Technical Specifications

  • Country of Origin: United States
  • Packaging: 25 EA per carton
  • Body Material: ABS
  • Swivel Ring Material: 430 Stainless Steel
  • Connection (887-AM): 3" Hub

Typical Applications

  • New construction toilet rough-in on ABS DWV piping
  • Residential and commercial bathroom remodels
  • Closet flange replacement on existing ABS drain stubs
  • Jobs requiring post-installation bolt-slot alignment without breaking the solvent-weld joint

Why Sioux Chief?

Sioux Chief builds rough-in plumbing components for professional installers who need parts that go in once and stay put. This closet flange line's one-piece ABS body with a corrosion-resistant 430 stainless steel swivel ring reflects that approach, combining a solid solvent-weld connection with the flexibility to true up closet bolt alignment on the jobsite. Manufactured in the United States and packaged 25 to a carton, these flanges are built for contractors stocking repeatable rough-in parts across the 886-4AM, 886-4ATM, 887-AM, and 888-AM model options.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Closet Flange
Product Finish:
Stainless Steel
Country of Origin:
United States
Department:
Plumbing
Product Group:
Rough-In and Supports
Product Subgroup:
Drains and Cleanouts
Product Material:
ABS
Product Size:
3" x 4"

Sioux Chief 887-AM – Frequently Asked Questions

1) Which Sioux Chief closet flange do I order for a 3 inch ABS stub versus a 4 inch hub?
Four configurations cover it. The 886-4AM is a straight 4 inch hub. The 886-4ATM is the same 4 inch hub with a test knockout. The 887-AM is a 3 inch hub that also fits inside 4 inch pipe. The 888-AM fits inside 3 inch pipe with an extended outlet. All four are one-piece ABS bodies with a 430 stainless steel swivel ring.
2) Can I rotate the closet bolt slots after the flange is glued in?
Yes. The 430 stainless steel ring turns independently of the solvent-welded ABS hub, so you can line the bolt slots up with the toilet after the pipe joint is set and the flange is in position. No need to break the joint to correct orientation, which is the usual callback with a fixed-ring ABS flange.
3) Will this closet flange glue into PVC DWV pipe?
No. The body is ABS and is made for a solvent-weld connection into ABS drain-waste-vent piping. If the stub coming out of the floor is PVC, use a PVC closet flange instead rather than trying to cement dissimilar plastics.
4) Can I use this flange to replace a broken one on an existing ABS drain stub?
Yes, that is one of the intended uses. Match the configuration to what is in the floor: a 4 inch hub stub takes the 886-4AM, a stub you need to go inside of at 4 inch or a 3 inch hub takes the 887-AM, and a 3 inch pipe you are fitting inside takes the 888-AM with its extended outlet. The joint is solvent-weld, so the existing stub has to be ABS and long enough to cement to.
5) What does the 3 inch by 4 inch size on this Sioux Chief flange mean?
It describes the hub-to-ring relationship, not two pipe sizes you can pick between. On the 887-AM the hub takes a 3 inch connection while the floor-level swivel ring presents a 4 inch interface for the toilet. Trade size across the line runs 3 inch to 4 inch.
6) Why would I pick the 886-4ATM with the test knockout over the plain 886-4AM?
The test knockout lets you keep the drain line capped for a pressure or water test during rough-in, then knock it out before setting the toilet. Both are 4 inch hub flanges otherwise. If the system is already tested or you are only replacing a flange on an existing stub, the plain 886-4AM is the simpler part.
7) Why a stainless ring instead of an all-plastic closet flange?
The ring is 430 stainless steel, so the part that carries the closet bolts and sits at finish floor level resists corrosion from mop water and wax-ring seepage. Plastic rings are the usual break point when a toilet rocks; metal holds the bolt slots. The ring and ABS body come as one assembly, so there are no loose parts to keep track of at rough-in.
8) Do closet bolts or a wax ring come with this Sioux Chief flange?
No. What you get is the one-piece ABS flange body with the stainless swivel ring. Closet bolts, the wax or foam seal, and the ABS cement for the hub joint are all separate items to add to the order.
9) How many closet flanges come in a carton, and are they made in the USA?
They ship 25 each per carton and are manufactured in the United States. That carton count is what distributors and contractors stocking repeat toilet rough-in work order against.
How fast can I get the Sioux Chief 887-AM delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 887-AM come with a warranty?
Absolutely. The Sioux Chief 887-AM is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 887-AM?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 887-AM from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!