Sioux Chief D432F 4-Branch Tra...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.64
Sioux Chief D432F 4-Branch Trap Primer Distributor, No-Lead FIP Swivel Inlet

Sioux Chief D432F 4-Branch Trap Primer Distributor, No-Lead FIP Swivel Inlet

(No reviews yet) Write a Review

Model: 695-D432F

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.64
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Sioux Chief D432F 4-Branch Trap Primer Distributor, No-Lead FIP Swivel Inlet

The Sioux Chief D432F is a no-lead trap primer distributor designed to feed multiple floor drain traps from a single trap primer valve, keeping trap seals charged and preventing sewer gas from entering occupied spaces. This 4-branch configuration splits incoming water flow to four flexible copper branch lines, and it connects to the trap primer supply line through a 1/2" FIP swivel inlet connection. The distributor is built for rough-in installation behind the wall or under the floor, ahead of the finished drain assemblies it feeds.

Key Features

  • Configuration: 4 flexible copper branches, allowing a single trap primer valve to distribute water to four separate floor drain traps.
  • Inlet Connection: 1/2" FIP swivel inlet connection for attachment to the trap primer supply line.
  • Installation Note: Do NOT use thread sealant on the FIP swivel threads — the swivel connection is designed to seal without sealant, and applying sealant can interfere with proper operation.
  • No-Lead Construction: Manufactured to no-lead (NL) specification, consistent with Sioux Chief's trap primer distributor line.
  • Flexible Branch Lines: The copper branch lines allow the installer to route each branch independently to its corresponding floor drain trap, simplifying rough-in layout in mechanical rooms and multi-drain installations.
  • Also Available In: Two- and three-branch versions of this distributor are offered within the Sioux Chief line for jobs with fewer trap primer connections required.

Technical Specifications

  • Branches: 4
  • Inlet Connection: 1/2" FIP Swivel
  • Lead Status: No-Lead (NL)
  • Country of Origin: United States
  • Packaging: 10 EA per pack

Typical Applications

  • Multi-Drain Floor Drain Trap Priming Systems
  • Commercial Restroom and Mechanical Room Rough-In
  • New Construction Drain-Waste-Vent Installations
  • Retrofit of Trap Primer Supply Lines Feeding Multiple Drains

Why Sioux Chief?

Sioux Chief manufactures this trap primer distributor in the United States to a no-lead specification, giving plumbers a straightforward way to extend a single trap primer valve to multiple floor drains without additional field-fabricated branch piping. The flexible copper branch design and FIP swivel inlet are built for the realities of behind-the-wall rough-in work, where routing flexibility and a reliable, sealant-free connection matter.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Trap Primer Distributor
Connection Type:
Threaded
Standards:
No-Lead
Country of Origin:
United States
Department:
Plumbing
Product Group:
Rough-In and Supports
Product Subgroup:
Fittings and Valves

Sioux Chief 695-D432F – Frequently Asked Questions

1) How do I prime four floor drain traps from one trap primer valve?
That's exactly the job of the Sioux Chief D432F distributor. It takes the single discharge line from one trap primer valve and splits it to four flexible copper branch lines, each routed independently to its own floor drain trap. No field-fabricated branch piping needed. If you only have two or three drains to feed, Sioux Chief offers two- and three-branch versions of the same distributor.
2) What size and type is the inlet on the Sioux Chief D432F trap primer distributor?
It's a 1/2 inch FIP swivel inlet, so it threads onto a 1/2 inch male trap primer supply connection and the swivel lets you align the body without twisting the branch lines. The connection type is threaded, not solder or press.
3) Should I use pipe dope or Teflon tape on the FIP swivel inlet?
No. The swivel connection on the D432F seals on its own, and thread sealant can interfere with proper operation. Thread it up dry and snug. This is the single most common install mistake on these distributors.
4) Is the Sioux Chief D432F lead free for potable water trap primer lines?
The D432F is built to Sioux Chief's no-lead (NL) specification, which is what inspectors look for on a trap primer line fed off potable water. It is manufactured in the United States.
5) Does the D432F get installed in the wall or at the drain?
Behind the wall or under the floor, as rough-in. It sits upstream of the finished drain assemblies, between the trap primer valve and the four traps it feeds, so it goes in before anything gets covered. Plan access accordingly on commercial restroom and mechanical room work.
6) Do I still need a trap primer valve if I buy the D432F?
Yes. The distributor only divides flow; it does not sense or meter water. You supply the trap primer valve upstream and connect its discharge to the 1/2 inch FIP swivel inlet. The four copper branch lines then carry the charge to each floor drain trap.
7) Can I use this on a retrofit, or is it new construction only?
Both. Typical applications include new construction drain-waste-vent installations and retrofitting existing trap primer supply lines that need to feed multiple drains. On a retrofit you're tapping the existing primer discharge with the 1/2 inch FIP swivel and running new flexible copper to each trap.
8) How is the Sioux Chief trap primer distributor packaged for a multi-unit job?
It ships 10 each per pack, which suits multi-family or institutional work where you're priming drain groups on several floors. The ordering model number is 695-D432F.
How fast can I get the Sioux Chief 695-D432F delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 695-D432F come with a warranty?
Absolutely. The Sioux Chief 695-D432F is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 695-D432F?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 695-D432F from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!