You may also like
SNAP-IN FTG 1/2IN DIA.840IN LEN1IN
Manufacturer Resources
Spec Sheet
Product Specs
- Idea Granular Category Code Igcc:
- 4441 >> Electrical fittings
- Product Group:
- Conduit & Raceway
- Product Type:
- Saddle & Snap-In Connectors
- Selling Unit Of Measure:
- each
- Standards:
- UL e38947
- Sub Brand Label:
- Steel City
- Surface Finishing:
- Zinc
- Department:
- Electrical
- Product Subgroup:
- Conduit Fittings
- Product Material:
- Spring Steel
- Country Of Origin:
- United States
Thomas & Betts XC-130 – Frequently Asked Questions
1) What size knockout or hole does the Thomas & Betts XC-130 snap-in fitting fit?
The XC-130 is a 1/2 inch trade size snap-in fitting with a .840 inch diameter and 1 inch length, so it seats in a standard 1/2 inch knockout in a box or enclosure. Match the trade size on your knockout, not the .840 figure, when you are ordering.
2) Do I need a locknut to install the XC-130, or does it just push in?
It is a snap-in type fitting, so the spring steel body locks itself into the knockout when you push it home. No locknut, no threading, no tool on the inside of the box. That is the whole point of choosing a snap-in over a threaded connector when you are working in a crowded box or overhead where you cannot get a hand behind the enclosure.
3) Is the XC-130 snap-in connector UL listed?
Yes, it carries UL file E38947. That is the detail an institutional or MRO inspector asks for when the fitting is going into a commercial or healthcare enclosure.
4) What is the Thomas & Betts XC-130 made of, and will it hold up in a damp mechanical room?
Spring steel with a zinc surface finish. The spring steel is what gives the snap-in action its grip in the knockout, and the zinc plating is the corrosion protection. That combination is aimed at dry and general indoor use rather than wet or corrosive locations.
5) Is the Thomas & Betts XC-130 the same thing as a Steel City XC-130?
Same part. The XC-130 is a Steel City branded fitting under the Thomas & Betts line, so a print or a material list calling out either name is pointing at this fitting.
6) Is the XC-130 sold individually or only by the box?
The XC-130 is sold each, so you can order the exact count a job calls for rather than buying a full carton.
How fast can I get the Thomas & Betts XC-130 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts XC-130 come with a warranty?
Absolutely. The Thomas & Betts XC-130 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts XC-130?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts XC-130 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.