You may also like
Southwire 9126SW8809 Dryer Replacement Cord - 10/3 30-Amp Flat SRDT 3-Wire 6' with NEMA 10-30 Plug - Gray
Features
- UL Listed
Manufacturer Resources
Product Specs
- Amps:
- 30 Amps
- Batteries Required :
- No
- Certifications And Listings:
- UL
- Compact Fluorescent Light Bulb :
- No
- Cord Construction Style Tubed Pressure Filled :
- Filled
- Csa Certified:
- No
- Direct Burial:
- No
- Energy Guide Label Required:
- No
- Flame Retardant:
- No
- Gauge:
- 3-Oct
- Gauge Conductor:
- 3-Oct
- Grounded:
- Yes
- Indoor Outdoor:
- Indoor
- Insulation Material Pvc Tpe Rubber :
- PVC
- Item Depth:
- 9
- Item Height:
- 2
- Item Length:
- 12
- Item Volume Cubic Feet:
- 0.0476
- Item Weight:
- 1.54
- Item Width:
- 3.5
- Master Carton Length:
- 12.75
- Master Pack Height:
- 7.25
- Max Min Temperature F :
- -4 to 140 F
- Maximum Temp C:
- 60
- Maximum Temp F:
- 140
- Minimum Temp C:
- -20
- Minimum Temp F:
- -4
- Nmfc Classification:
- 61490
- Number Of Outlets:
- 0
- Package Length:
- 9
- Packaging Type:
- Sleeve
- Plug Color:
- Gray
- Plug Configuration:
- NEMA 10-30P
- Shielded:
- No
- Solar Powered :
- No
- Swing Arm :
- No
- Tier Qty Pallet:
- 20
- Wattage Watts :
- 3750/7500
- Wet Location Use:
- No
- Product Voltage:
- 125/250
- Product Color:
- Grey
- Product Material:
- SRDT Flat
Southwire 91268809 – Frequently Asked Questions
1) Is a 30-amp 10/3 cord enough for a standard electric clothes dryer?
Yes for a typical residential electric dryer on a 30-amp circuit. The cord is rated 30 amps at 125/250 volts, which works out to 3750/7500 watts, and uses 10 AWG three-conductor construction. That matches the load of a standard electric dryer. A dryer or appliance requiring more than 30 amps needs a heavier cord and circuit.
2) Is 6 feet of cord long enough behind a dryer, and can I use an extension cord with it?
The cord runs 6 feet from the dryer terminal block to the plug, which covers a normal laundry closet or wall receptacle a couple of feet behind the machine. If the receptacle sits farther away, order a longer dryer cord rather than adding an adapter or extension; 30-amp appliance circuits should land straight on the receptacle.
3) Can this cord be used in a garage laundry or an unheated outdoor area?
It is an indoor-rated cord and is not approved for wet locations or direct burial. The jacket is PVC with a usable temperature range of -4 to 140 F, so an unheated but dry interior garage is within its temperature band, but anywhere exposed to weather or damp is not an acceptable location for it.
4) Flat SRDT or round dryer cord, which should I buy for a tight laundry closet?
This one is the flat type: SRDT flat jacket construction, filled rather than tubed. Flat cord lies against the wall and lets the dryer sit closer to it, which is why it is the common pick in shallow laundry closets. A round jacket cord carries the same 30-amp rating but takes more space behind the machine. Either works electrically, so choose on clearance.
5) Is this Southwire dryer cord UL Listed for property management and inspection work?
Yes, the cord is UL Listed. Note that it does not carry CSA certification, so for jobs in Canada requiring a CSA-marked assembly you will need a different cord.
6) What comes in the package, and does the dryer cord include terminal ring connectors?
Southwire ships the 91268809 as a single 6-foot cord with the molded NEMA 10-30P plug already attached, packed in a sleeve. Weight is 1.54 lb. The free end goes onto the dryer's terminal block, so you reuse the machine's existing terminal screws and the strain relief clamp in the dryer's cord opening. No tools or hardware are included.
7) Will the gray cord match the other dryer cords in my unit turnovers?
Both the jacket and the molded plug are gray, so replacements across a fleet of units look consistent. The gray SRDT flat jacket is the standard appearance for 3-wire dryer cords, which helps when you are standardizing one part number across a portfolio of laundry hookups.
How fast can I get the Southwire 91268809 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Southwire 91268809 come with a warranty?
Absolutely. The Southwire 91268809 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Southwire 91268809?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Southwire 91268809 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.