Stanley Security WH-50P Quick ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$46.79
Stanley Security WH-50P Quick Connect Wire Harness, One End Crimped

Stanley Security WH-50P Quick Connect Wire Harness, One End Crimped

(No reviews yet) Write a Review

Model: WH-50P

In Stock (leaves warehouse same day if ordered before 3pm ET)

$46.79
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Stanley Security WH-50P Quick Connect Wire Harness, One End Crimped

The Stanley WH-50P is a 50-inch wire harness engineered for use in Stanley’s Quick Connect electrified hardware systems. It comes with a plug-type connector on one end and exposed pin heads on the other, making it ideal for retrofit or field installations. This model allows installers to maintain one standard connection while adapting the other end to match local wiring or hardware setups. It’s commonly used with electrified exit devices, power transfers, or hinges to facilitate clean, code-compliant installations without requiring full rewiring.

Specifications

Specification Detail
Model / Part Number WH-50P (Stanley / Best / Stanley Security) 
Description 50-inch wire harness, Quick-Connect plug on one end, exposed pin heads on the other end
Length 50 in (≈ 1270 mm) total harness length
Connector Configuration One end terminated with Quick-Connect connector; other end exposed pins for field connection
Wire Harness Series Part of Stanley Quick Connect™ Harness line for electrified door hardware. Compatible with BEST, PRECISION, and Stanley electrified components
Typical Applications Used to connect electrified hardware components (exit devices, electrified hinges, power transfers, etc.) through doors or frames where one side wiring ends with exposed pins to match site wiring.
Finish / Condition Standard insulating jacket on wires; pins exposed on one end. Not painted or plated.
UPC / Identification WH-50P wire harness, part of hinge hardware & parts category with vendor listings.

Applications & Benefits

  • Simplifies retrofit installations by providing a plug-end connector and open pin end for flexible wiring

  • Supports clean, consistent integration with Stanley Quick Connect compatible exit devices, electrified hinges, and power transfer hardware

  • Reduces installation time and potential wiring errors

  • Using the exposed pin end allows installers to adapt to onsite wiring conditions without needing specialized connectors

Manufacturer Resources

Product Specs

Subcategory:
Wire Harness
Product Group:
Wire Harness
Product Subgroup:
Wire Harness
Product Type:
Wire Harness
Commercial/Residential:
Commercial
Product Category:
Wire Harness
Department:
Door Hardware

Stanley Security WH-50P – Frequently Asked Questions

1) What is the Stanley WH-50P wire harness and how are the two ends terminated?
The WH-50P is a 50 inch harness for Stanley Quick Connect electrified door hardware. One end is factory terminated with a Quick Connect plug; the far end is bare pin heads you land yourself in the field. That asymmetry is the point: the plug side stays a standard connection to the electrified device, and the pin side gets adapted to whatever wiring is already in the frame or junction box.
2) Will the WH-50P plug into BEST or Precision electrified hardware, or only Stanley?
It works across all three. The WH-50P is part of the Stanley Quick Connect harness line and mates with BEST, Precision, and Stanley electrified components. If you are running a mixed opening with a BEST electrified lock and Stanley power transfer, one harness part number covers both sides of that connector standard.
3) Is 50 inches of wire enough to get from an electric hinge or power transfer to an exit device?
50 inches (about 1270 mm) is the total harness length, measured plug to pin end. On a standard opening that covers the run from a power transfer or electrified hinge at the mid-stile across to a device on the door. Measure your actual routing path, including the loop inside the door and any slack you need at the raceway, before committing, because the harness is a fixed length and cannot be extended at the plug end.
4) Do I need a special crimp tool or connector for the bare pin end of the WH-50P?
No. The open pin end is meant to be adapted to onsite wiring without specialized connectors, which is why the harness ships crimped on one end only. You terminate the pin side to match local wiring, using whatever method the job and inspector accept.
5) Should I use a one-end-crimped harness or a harness with plugs on both ends?
Pick by what is on both ends of your run. A both-ends-plugged harness is the choice when the device and the transfer are both Quick Connect, because it is a drop-in with no field terminations at all. The WH-50P, crimped on one end only, is for the retrofit case: one side is Quick Connect hardware, the other side is existing building wiring, a terminal strip, or a component that does not carry the plug. If both ends of your run take the plug, the one-end version just leaves you a splice to make.
6) Do I have to rewire the whole opening to add an electrified exit device?
Not with a Quick Connect harness in place. The WH-50P bridges an electrified device to existing site wiring, plug on the hardware side and open pins on the building side, so a retrofit is a terminate-and-plug job rather than a full rewire of the door and frame. That is the main reason it exists on retrofit work.
7) Can I use a Stanley Quick Connect wire harness on a residential door?
The WH-50P is a commercial product, built for electrified openings in commercial buildings: electrified exit devices, electric hinges, and power transfers. Nothing stops it working electrically on a house door, but it is specified for commercial electrified hardware and only pays off where that hardware is already installed.
8) Is the WH-50P harness available in a specific finish to match my door hardware?
Finish is not a factor here. The wires carry a standard insulating jacket, the pins are exposed at the field end, and nothing is painted or plated. The harness runs concealed through the door and frame, so it never shows on the finished opening.
How fast can I get the Stanley Security WH-50P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Stanley Security WH-50P come with a warranty?
Absolutely. The Stanley Security WH-50P is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Stanley Security WH-50P?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Stanley Security WH-50P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!