STRAIN RELIEF CONNECTOR, M.I.
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Group:
- Wiring Devices
- Product Type:
- Strain Relief Cord Connectors-45 Degree
- Department:
- Electrical
- Product Subgroup:
- Cord Grips
- Product Color:
- Metallic
- Product Material:
- Malleable Iron
- Pack size (unit):
- 100
Thomas & Betts 2204 – Frequently Asked Questions
1) Is the Thomas & Betts 2204 cord connector a straight or angled body?
The 2204 is a 45 degree strain relief cord connector, so the cord leaves the box at an angle rather than straight out. That is what you want when the cord has to turn immediately off the enclosure and you do not have room to sweep a straight connector into position. If the run comes off square and needs no deflection, a straight strain relief body is the better choice.
2) What is the Thomas & Betts 2204 strain relief connector made of?
Malleable iron, with a metallic finish. Malleable iron gives you a metal body that takes the clamping load of a cord grip without cracking, which matters on machine tool and industrial feeds where the cord gets tugged. If your application calls for a non-metallic or corrosion-resistant body in a wash-down or outdoor setting, specify a different material.
3) Is the Thomas & Betts 2204 sold individually or by the box?
It ships as a 100 piece pack. For an MRO crib or a panel shop standardizing on one angled cord grip, that is a single stocking line; for a one-off repair it is far more than one job needs, so plan the order around the full 100 count.
4) What is the manufacturer part number for the Thomas & Betts 45 degree malleable iron cord grip?
The part number is 2204, from Thomas & Betts. Order against that number for the 45 degree malleable iron strain relief connector; the adjacent numbers in the family cover other body angles and cord ranges, so the four digit number is what pins down this specific connector.
5) What does a strain relief cord connector actually do on an enclosure?
It clamps the jacket of a flexible cord where the cord enters a box or fitting, so any pull on the cord is taken by the clamp instead of the terminal screws inside. The 2204 does that in a malleable iron body at a 45 degree entry angle. It is a cord grip, not a conduit fitting, so it is for portable or flexible cord feeds rather than raceway.
How fast can I get the Thomas & Betts 2204 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts 2204 come with a warranty?
Absolutely. The Thomas & Betts 2204 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts 2204?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts 2204 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.