Strut Clamp For 2 EMT Galv (Box 25)
Features
- Soft wide saddle supports cable conduit & pipes
- No screws or bolts to drop
- Requires only a screwdriver or nutdriver for installation
- One Piece Strut Clamps For EMT/Rigid Conduit
Additional Notes
- other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Fastener Length:
- 2
- Fastener Width:
- 2
- Language Code:
- EN
- Order Minimum Imperial:
- 25
- Order Minimum Uom Imperial:
- CT
- Pack Type:
- Box
- Product Group:
- Electrical Hardware
- Product Height:
- 3.25 in
- Product Length:
- 7.25 in
- Product Weight:
- 7.5 lbs
- Product Width:
- 6.75 in
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Conduit Clamps
- Product Type:
- Strut Clamp
- Type2:
- Strut Clamp
- Product Finish:
- Galvanized
- Product Details:
- Strut Clamp
- Product Material:
- Steel
Metallics 1PSC200 – Frequently Asked Questions
1) Will the Metallics 1PSC200 strut clamp hold 2 inch rigid conduit as well as 2 inch EMT?
Yes. The 1PSC200 is a one-piece strut clamp sized for 2 inch EMT and rigid conduit, so either raceway drops into the same saddle. The wide saddle also carries cable and pipe runs of that diameter.
2) Do I need separate nuts, bolts or strut nuts to mount this Metallics strut clamp to channel?
No loose hardware. The 1PSC200 is a one-piece clamp with no screws or bolts to drop, and it goes onto the strut with just a screwdriver or nutdriver. That matters on a lift or overhead run where dropped strut nuts cost real time.
3) Does the Metallics 1PSC200 strut clamp meet Buy American and ARRA requirements for a federally funded job?
It is flagged compliant for both Buy American and ARRA, which is what a government, school or healthcare procurement file usually needs on conduit support hardware. Country of origin is listed as multiple.
4) Will this 2 inch clamp work for my 3/4 inch or 1 inch conduit run?
No. The 1PSC200 is sized specifically for 2 inch EMT and rigid, and a strut clamp that loose on smaller conduit will not grip. Metallics makes the one-piece strut clamp in other trade sizes, so order the clamp matched to your conduit diameter rather than shimming this one.
5) How many 2 inch EMT strut clamps come in a box of Metallics 1PSC200?
They ship 25 to a box, and 25 count is the order minimum, so a single buy covers 25 support points on a run. For a long overhead feeder laid out at standard strut spacing, that is one box per roughly 25 hangers.
6) Is a galvanized strut clamp like the 1PSC200 okay for a damp mechanical room or parking garage?
The clamp is steel with a galvanized finish, which is the normal choice for damp interior spaces, mechanical rooms and covered garages where bare steel would rust. For direct weather exposure or corrosive wash-down areas, specify stainless support hardware instead.
7) Can the 1PSC200 be used to support pipe or bundled cable, not just conduit?
Yes. The soft wide saddle is made to support cable, conduit and pipe, so it works for a 2 inch pipe run or a cable bundle of that diameter on strut. The wide bearing surface spreads load instead of pinching the jacket, which is why it suits cable.
8) What does a box of 25 Metallics 2 inch strut clamps weigh and how big is the carton?
The box runs 7.5 lbs and measures 7.25 by 6.75 by 3.25 inches, so it is easy to carry up a ladder or stage several boxes in a gang box on a multi-floor rough-in.
How fast can I get the Metallics 1PSC200 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics 1PSC200 come with a warranty?
Absolutely. The Metallics 1PSC200 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics 1PSC200?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics 1PSC200 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.